System Info: HP Laptop
CPU
CPU Brand Name: AMD Turion64 ML-32
CPU Stepping: SH-E5
CPU Cores: 1
CPU Codename: Newark
CPU Logical/HT Units: 1
CPU Cache: 64 + 64 + 512
Current loaded CPU Microcode Update revision (µCU): -
Platform (socket): Socket 754
SSPEC: -
Features (CPU)
MMX, AMD 3DNow!, AMD 3DNow!-2, SSE, SSE-2, SSE-3
DEP, EM64T
Drives (hard disks, optical drives, etc.)
Interface / Model
ATA-133 / TS32GSSD25-M [32 GB, 1KB]
ATAPI / HL-DT-ST DVDRAM GSA-4082N [DVD+R DL]
GPU
Graphics Card: ATI/AMD MOBILITY Radeon XPRESS 200 (RS480M) - Video Adapter [Hewlett-Packard]
Graphics Chipset: ATI Mobility Radeon Xpress 200G (RS480M)
Graphics Bus: PCI
Select GPU: GPU #0
Graphics Memory Size: 128 MB
Current Clocks (MHz)
GPU/Shader Clock: 250.0
GPU Memory Clock: 300.0
Motherboard
Motherboard Model: Hewlett-Packard 30A4
Motherboard Chipset: ATI MOBILITY RADEON Xpress 200 (RS480M) + SB400
BIOS Date: 8/18/06
BIOS Version: F.43
Memory
Total System Memory Size: 512 MB
System Memory Type: DDR-SDRAM
Current Timing
Current System Memory Clock: 163.2 MHz
Current Memory Operating Mode: Single-Channel
Timing
Current Memory CAS Latency: 2.5
Current Memory RAS-to-CAS Delay: 3
Current Memory Row Precharge Delay: 3
Current Memory Active to Precharge Delay: 7
Current Memory Row Cycle Time: 10
Current Memory Refresh Recovery Delay Time: 12
Modules
Memory Module #0: Micron Tech. 8VDDT3264HY-335G3
Memory Module #1: Micron Tech. 8VDDT3264HY-335G3
Memory Module Capacity: 256 MB
Memory Module Maximum Clock: 167 MHz
Memory Module Error Check/Correction (EEC): N
Memory Module Type: PC2700 DDR-SDRAM
OS
Operating System: Microsoft Windows XP Home Edition Build 2600
Linux Commands (Ubuntu Desktop Edition 10.04 LTS)
[]$ uname -a Linux tomihasa-laptop 2.6.32-41-generic #88-Ubuntu SMP Thu Mar 29 13:08:43 UTC 2012 i686 GNU/Linux []$ uname -s Linux []$ uname -n tomihasa-laptop []$ uname -r 2.6.32-41-generic []$ uname -v #88-Ubuntu SMP Thu Mar 29 13:08:43 UTC 2012 []$ uname -m i686 []$ uname -p unknown []$ uname -i unknown []$ uname -o GNU/Linux []$ arch i686 []$ cat /proc/version Linux version 2.6.32-41-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #88-Ubuntu SMP Thu Mar 29 13:08:43 UTC 2012 []$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 36 model name : AMD Turion(tm) 64 Mobile Technology ML-32 stepping : 2 cpu MHz : 800.000 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm bogomips : 1595.26 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc
Display and Video Card
(Windows XP: Control Panel: Display: Advanced.)
General
Display
DPI setting: [Normal size (96 DPI)]
Adapter
Adapter Type
ATI MOBILITY RADEON Xpress 200 Series
Adapter Information
Chip Type: ATI display adapter
DAC Type: Internal DAC
Memory Size: 128 MB
Adapter String: ATI MOBILITY RADEON Xpress 200 Series
Bios Information: BK-ATI VER008.047l.001.001
Monitor
Monitor type
Generic Television
Plug and Play Monitor
Monitor Settings
Screen refresh rate: [60 Hertz]
Troubleshoot
Hardware acceleration
Hardware acceleration: None - Full
( ) 0 - "Disable all accelerations. Use this setting only if your computer fequently stops responding or has other severe problems."
( ) 1 - "Disable all but basic accelerations. Use this setting to correct more severe problems."
( ) 2 - "Disable all DirectDraw and Direct3D accelerations, as well as all cursor and advanced drawing accelerations."
( ) 3 - "Disable all cursor and advanced drawing accelerations. Use this setting to correct drawing problems."
( ) 4 - "Disable cursor and bitmap accelerations. Use this setting to correct problems with the mouse pointer, or to correct problems with corrupt images."
(*) 5 - "All accelerations are enabled. Use this setting if your computer has no problems. (Recommended)"
[x] Enable write combining
Overlay
Overlay Adjustments (I can't adjust these)
Brightness: 0% (min. -100 / max. 100)
Contrast: 100% (min. 0 / max. 200)
Saturation: 100% (min. 0 / max. 200)
Hue: 0.0 (min. -30.0 / max. 30.0)
Gamma: 1.0 (min. 0.85 / max. 2.5)
POWERPLAY
"Use POWERPLAY(tm) to adjust your graphics processor settings for higher performance or longer battery life."
Color (these I can adjust)
Gamma: 1.00 (min. 0.5 / max. 3.5)
Brightness: 0 (min. -100 / max. 100) (from here you can make screen even darker if needed)
Contrast: 100 (min. 0 / max. 200)
OpenGL
Main Settings
( ) Performance
(*) Balanced
( ) Quality
Custom Settings
Anti-Aliasing
Samples: 2X (also available: 4X, 6X)
Anisotropic Filtering
Samples: 2X (also available: 4X, 8X, 16X)
Texture Preference: High Quality
Mipmap Detail Level: High Quality
Wait for Vertical Sync: Default Off
Direct3D
Main Settings
( ) Performance
(*) Balanced
( ) Quality
Custom Settings (pretty much the same as for OpenGL)
Anti-Aliasing
Samples: 2X (also available: 4X, 6X)
Anisotropic Filtering
Samples: 2X (also available: 4X, 8X, 16X)
Texture Preference: High Quality
Mipmap Detail Level: High Quality
Wait for Vertical Sync: Application Preference
Options
[x] Re-activate all warning messages
[x] Enable ATI taskbar icon application
[ ] Show ATI icon on taskbar
[ ] Disable quick resolution feature
Last modified: April 24th, 2012
Author: Tomi Häsä (tomi.hasa@gmail.com)
URL: http://sites.google.com/site/tomihasa/system-info-hp-laptop