Start from inside front corner of right shoe. More
Take care with the last bit as it comes undone. Avoid damage to heel block
Grind right heel flat and check angle
Grind left heel flat and check angle
Right heel is most worn, avoids double handling
Sit shoe on heel, check gap is 1-5mm under sole
Makes for comfortable and stable repair
Put shoes together back to back
Ensures even heights
From middle to edge
Keeps glue off sides of heel block
Heat heel rubber only
To make it conform to the heel block and easy to trim
Knife, Heel Trim, Cone, Deburr
Flows with layout of machine
Paint if needed then polish
Don't wait for paint to dry unless absolutely necessary
1 Remove right heel, grind, check angle, glue
2 Remove left heel, grind, check angle, glue
3 Assemble right shoe
4 Trim right shoe with knife, then heel trimmer, deburr, wax wheel and polish
5 Assemble left shoe
6 Trim left shoe with knife, then heel trimmer, deburr, wax wheel and polish
Assembling
Put shoe on last, place new heel on with breast lined up perfect, else overhang c5mm, with one side 2mm from edge if possible. Hammer.