Atoming

Yes sure we will get in there, clean that out and glue it up for you.

1 Clean

2 Apply atom (Super Glue)

3 Line up

4 Hold very tightly

1 Clean

Remove dust, dirt, hair and any loose bits of existing glue.

2 Apply atom

Use only a little, but ensure a film goes right to the edges, onto one surface. on the shoe not the build You can always add more.

3 Line up

4 Hold very tightly

Clamp and hold it really tightly for about 7-30 seconds. The Atom needs to go all the way to the edge and there needs to be enough so that it just comes out the edge when you press it together. But no more.

Wipe up excess straight away .Once you have pressed the 2 pieces together, do not move them or pull them apart, as they then may not stick. If this happens dry both surfaces with a rag, regrind and start again. If still not sticking, leave clamped for 5 minutes

DO NOT grind until dry! If there is any doubt, WAIT! Wear eye protection if any doubt still exists