JOURNAL PAPERS

Journal Papers

Page updated

Google Sites

Report abuse

JOURNAL PAPERS

Journal Papers

[66] Y.-C. Shieh, H.-Y. Lin, W. Hsu, Y.-H. Lin, "A rapid fatigue test method on micro structures for high cycle fatigue," IEEE Transactions on Device and Materials Reliability 2016. (Accepted)

[65] C.-Y. Huang, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, H.-Y. Huang, S.-K. Fan, D.-J. Yao, C.-H. Liu, W. Hsu, "A highly efficient bead extraction technique with low bead number for digital microfluidic immunoassay," Biomicrofluidics 2016, 10, 011901.

[64] K.-W. Chang, P.-Y. Chang, H.-Y. Huang, C.-J. Li, C.-H. Tien, D.-J. Yao, S.-K. Fan, W. Hsu, C.-H. Liu, "Womb-on-a-Chip Biomimetic System for Improved Embryo Culture and Development," Sensors & Actuators: B. Chemical 2016, 226, 218-226.

[63] C.-Y. Huang, P. Sun, M.-S. Lee, S.-Y. Wu, Y.-C. Shieh, W. Hsu, "A resettable, wireless and passive fall-down recorder using a magnetic droplet with an LC circuit," IEEE Sensors Journal 2016, 16, 654-661.

[62] S.-Y. Wu, C. Yang, W. Hsu, and L. Lin, “RF Passive Components, Circuits and Wireless Sensors Fabricated by 3D Additive Manufacturing,” Microsystems and Nanoengineering 2015, 1, 15013. (Nature Publishing Group, selected as FEATURED ARTICLE)

[61] H.-Y. Huang, H.-H. Shen, C.-H. Tien, C.-J. Li, S.-K. Fan, C.-H. Liu, W. Hsu, and D.-J. Yao, "Digital Microfluidic Dynamic Culture of Mammalian Embryos on an Electrowetting on Dielectric (EWOD) Chip." PLoS ONE 2015, 10, e0124196.

[60] M.-S. Lee, D.-J. Yao, and W. Hsu, "An Implantable Drug-delivery System on a Chip." Current Topics in Medicinal Chemistry 2015, 15, 1516-1524.

[59] C.-Y. Huang, P.-H. Shih, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, H.-Y. Huang, S.-K. Fan, and W. Hsu, "AMPFLUID: aggregation magnified post-assay fluorescence for ultrasensitive immunodetection on digital microfluidics." Proceedings of the IEEE 2015, 103, 225-235.

[58] H.-C. Yen, W. Hsu, J.-M. Huang, C.-W. Lu, and C.-N. Hsu, "Development of a High Efficiency In-Line Tube Fan Using CFD." International Journal of Turbo and Jet Engines 2015, 32, 105-115.

[57] T.-H. Wong, T.-K. Chung, T.-W. Liu, H.-J. Chu, W. Hsu, P.-C. Yeh, C.-C. Chen, M.-S. Lee, and Y.-S. Yang, "Electromagnetic/Magnetic-Coupled Targeting System for Screw-Hole Locating in Intramedullary Interlocking-Nail Surgery." IEEE Sensors Journal 2014, 14, 4402-4410.

[56] S.-Y. Wu, C.-Y. Hung, and W. Hsu, "A wirelessly readable and resettable shock recorder through the integration of LC circuits and MEMS devices." Smart Materials and Structures 2014, 23, 095030.

[55] S.-Y. Wu and W. Hsu, "Wireless EWOD/DEP chips powered and controlled through LC circuits and frequency modulation." Lab on a Chip 2014, 14, 3101-3109.

[54] Y.-T. Huang and W. Hsu, "Fabricating embedded SU-8 microstructures with asymmetric inside cross section by double-side multiplepartial exposure method." Microelectronic Engineering 2014, 121, 64-67.

[53] H.-C. Yen, W. Hsu, and S.-C. Lin, "Performance enhancement of the in-line fan equipped with the guiding vane and the tail body." Advances in Mechanical Engineering 2014, 2014, 817637.

[52] Y.-T. Huang, H.-L. Chen, and W. Hsu, "An Analytical Model for Calculating the Pull-in Voltage of Micro Cantilever Beams Subjected to Tilted and Curled Effects." Microelectronic Engineering 2014, 125, 73-77.

[51] Y.-T. Huang and W. Hsu, "A Simulation Model on Photoresist SU-8 Thickness after Development under Partial Exposure with Reflection Effect." Japanese Journal of Applied Physics 2014, 53, 036505.

[50] Y.-H. Lin, Y.-F. Chang, H.-F. Meng, H.-W. Zan, W. Hsu, and C.-H. Chen, "Soldering of solution-processed organic vertical transistor and light-emitting diode on separate glass substrates by tin micro-balls." Organic Electronics, 2013, 14, 3052-3060.

[48] Y.-C. Lee, M.-H. Li, Y.-T. Cheng, W. Hsu, and S.-S. Li, "Electroplated Ni-CNT Nanocomposite for Micromechanical Resonator Applications." IEEE Electron Device Letters 2012, 33, 872-874.

[47] Y.-C. Lee, Y.-T. Cheng and W. Hsu, "Stress Gradient Modification of the Electroplated Ni-Diamond Nanocomposite for MEMS Fabrication." Journal of The Electrochemical Society, 2012, 159, 460-466.

[46] Y.-H. Lin and W. Hsu, "Polymer as the protecting passivation layer in fabricating suspended SCS structures at both anisotropic and isotropic etching." Journal of Micromechanics and Microengineering 2012, 22, 045015.

[45] S. Chen, C. Chang and W. Hsu, "Improved model of rectangular scratch drive actuator." Journal of Micro/Nanolithography, MEMS, MOEMS 2011, 10, 013016.

[44] S.-K. Fan, H. Yang and W. Hsu, "Droplet-on-a-Wristband: Chip-to-Chip Digital Microfluidic Interfaces between Replaceable and Flexible Electrowetting Modules." Lab on a Chip 2011, 11, 343-347.

[43] C.-H. Wu, W. Hsu, K.-W. Fan, Y.-L. Lin, and Y.-C. Lin, "Optimization of an optical disk manufacturing process for polymer microfluidic substrates by using the design of experiment methodology." Journal of Micro/Nanolithography, MEMS, MOEMS 2010, 9, 031011.

[42] C.-Y. Yang, Y.-T. Cheng and W. Hsu, "The Investigation of Nano-Roughening Effect on the Reliability Enhancement of Adhesive Bond for NEMS Manufacture Application." IEEE Transactions on Advanced Packaging 2010, 33, 356-361.

[41] S. Chen, C. Chang, and W. Hsu, "Output Force Enhancement of Scratch Drive Actuator in Low-Voltage Region by Using Flexible Joint." Sensors and Transducers 2010, 115, 71-82.

[40] C.-W. Chang, W. Hsu, "Three-dimensional micro assembly of a hinged nickel micro device by magnetic lifting and micro resistance welding." Journal of Micromechanics and Microengineering 2009, 19, 105026.

[39] C.-W. Chang, C.-C. Yeh and W. Hsu, "Experimental investigations and characterization of micro resistance welding with an electro-thermal actuator." Journal of Micromechanics and Microengineering 2009, 19, 025001.

[38] C.-S. Huang, Y.-T. Cheng, J. Chung and W. Hsu, "Investigation of Ni-based Thermal Bimaterial Structure for Sensor and Actuator Application." Sensors and Actuators :A 2009, 149, 298-304.

[37] J. Chung, W. Hsu, "Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method." Journal of Micromechanics and Microengineering 2008, 18, 035014.

[36] P.-L. Cheng, C.-I. Liao, C.-C. Chien, C.-L. Yang, S.-F. Ting, L.-S. Jeng, C.-T. Huang, O. Cheng, S.-F. Tzou, W. Hsu, "Effectiveness of Si thin buffer layer for selective SiGe epitaxial growth in recessed source and drain for pMOS." Materials Chemistry and Physics 2008, 107, 471-475.

[35] J. Chung, and W. Hsu, "Enhancement on forming complex three dimensional microstructures by a double-side multiple partial exposure method." Journal of Vacuum Science and Technology B 2007, 25, 1671.

[34] S.-K. Fan, H. Yang, T.-T. Wang, and W. Hsu, "Asymmetric Electrowetting - Moving Droplets by a Square Wave." Lab on a Chip 2007, 7, 1330-1335.

[33] C.-H. Wu, C.-H. Chen, K.-W. Fan, W. Hsu and Y.-C. Lin, "Design and fabrication of polymer microfludic substrates using the optical disc process." Sensors and Actuators A: Physical 2007, 139, 310-317.

[31] H.-L. Hsu, Y.-R. Chang, Y. Chiu, Y.-H. Lin and W. Hsu, "A novel self-aligned process between anano-aperture and a solid immersion lens for a near-field optical system." Journal of Micromechanics and Microengineering 2006, 16, 2632-2638.

[30] L.-N. Tsai, Y.-T. Cheng, W. Hsu, and W. Fang, "Ni-carbon nanotubes Nanocomposite for Robust microelectromechanical systems fabrication." Journal of Vacuum Science and Technology B 2006, 24, 205-210.

[29] L.-N. Tsai, G.-R. Shen, Y.-T. Cheng, W. Hsu, "Performance Improvement of an Electrothermal Microactuator Fabricated Using Ni-Diamond Nanocomposite." IEEE/ASME Journal of Micro Electro Mechanical Systems 2006, 15, 149-159.

[28] Z.-H. Liang, Y.-T. Cheng, W. Hsu, Y.-W. Lee, "A Wafer-Level Hermetic Encapsulation for MEMS Manufacture Application." IEEE Transaction on Advanced Packaging 2006, 29, 513-519.

[27] C.-T. Wu and W. Hsu, "Design and Fabrication of an Electrothermal Microactuator for Multi-level Conveying." Journal of Microsystem Technologies 2006, 12, 293-298.

[26] C. P. Hsu and W. Hsu, "Design and Characterization of Electrothermal Monolithic Long-Stretch Micro Drive with High Output Efficiency." IEEE/ASME Journal of Micro Electro Mechanical Systems 2006, 15, 935-944.

[25] Y. Lai, E. V. Bordatchev, S. K. Nikumb, W. Hsu, "Performance Characterization of In-plane Electro-ThermallyDriven Linear Microactuators." Journal of Intelligent Material Systems and Structures 2006, 17, 919-929.

[24] D.-H. Hwang, K.-P. Chin, Y.-C. Lo, and W. Hsu, "Structure Design of A 2D High-Aspect-Ratio Resonant MicrobeamAccelerometer." SPIE Journal of Microlithography, Microfabrication, and Microsystems 2005, 4, 033009.

[23] C.-S. Lin, S.-Y. Wen, and W. Hsu, "Variable Optical Attenuator with Tunable Nonsmooth Curved Mirror." Japanese Journal of Applied Physics 2004, 43, 7764-7768.

[22] C.-H. Ho and W. Hsu, "Experimental investigation on an embedded root method for stripping SU-8 photoresistin UV-LIGA process." Journal of Micromechanics and Microengineering 2004, 14, 356-364.

[21] C. Hsu and W. Hsu, "Instability on micromachined curved thermal bimorph structures." Journal of Micromechanics and Microengineering, 2003, 13, 955-962.

[20] C.-C. Lee and W. Hsu, "Method on surface roughness modification to alleviate stiction of microstructures." Journal of Vacuum Science and Technology B 2003, 21, 1505.

[19] C.-H. Tien, H.-L. Chou, Y. Chiu, W. Hsu, T. D. Milster, Y.-C. Lai, and H.-P. D. Shieh, "Fiber-Lens-based Module for Optical Recording Applications." Japanese Journal of Applied Physics 2003, 42, 4345-4348.

[18] U. Lu, C. P. Hu, Y. C. Shih, Y. H. Yang, C. Y. Wu, C. J. Yuan, M. D. Ker, T. K. Wu, Y. K. Li, Y. Z. Hsieh, W. Hsu, and C.T. Lin, "CMOS Chip as Luminescent Sensors for Biochemical Reactions." IEEE Sensors Journal 2003, 3, 310-316.

[17] H. C. Liu, Y. H. Lin, and W. Hsu, "Sidewall Roughness Control in Advanced Silicon Etch Process." Journal of Microsystem Technologies 2003, 10, 29-34.

[16] C. C. Lee and W. Hsu, "Optimizationof an Electro-thermally and Laterally Driven Microactuator." Journal of Microsystem Technologies 2003, 9, 331-334.

[15] B. Lee and W. Hsu, "Modelling of a Planar Derailleur System on Bicycles with Experimental Verification." Int. Journal of Vehicle Design 2002, 30, 263-278.

[14] C. T. Wu and W. Hsu, "An Electro-thermally Driven Microactuator with Two Dimensional Motion." Journal of Microsystem Technologies 2002, 8, 47-50.

[13] C. S. Pan and W. Hsu, "Electro-thermally Driven Microgrippers with Bilateral Motion." Journal of Chinese Society of Mechanical Engineers 2001, 22, 71-78.

[12] C. Hsu and W. Hsu, "A Two-way Membrane-type Micro Actuator with Continuous Deflection." Journal of Micromechanics and Microengineering 2000, 10, 387-394.

[11] M. F. Wu and W. Hsu, "Thermally Driven Polysilicon Actuators for Lateral Displacement." Journal of Intelligent Material Systems and Structures 1999, 10, 402-409.

[10] M. H. Wu and W. Hsu, "Investigation of Torsion Springs by Considering the Friction and the End Effect." ASME, Journal of Mechanical Design 1999, 121, 628-633.

[9] C. S. Pan and W. Hsu, "A Microstructure for the in situ Determination of Residual Strain." IEEE/ASME Journal of Microelectromechanical Systems 1999, 8, 200-207.

[8] P. L. Cheng and W. Hsu, "Design and Fabrication of A Strain-Type Atomic Force Micro Probe." Journal of Chinese Society of Mechanical Engineers 1999, 20, 1-9.

[7] P. Wu and W. Hsu, "Investigation of the Four-Bar Linkage in a Rear Derailleur System with Experimental Verification." International Journal of Vehicle Design 1998, 19, 454-471.

[6] J. J. Liou, G. Huang, and W. Hsu, "Experimental Study of A Variable Pressure Damper on Automotive Valve Train." ASME Journal of Mechanical Design 1998, 120, 279-281.

[5] M. H. Wu, and W. Hsu, "Modelingthe Static and Dynamic Behavior of A Conical Spring by Considering the Coil Closeand the Damping Effects." Journal of Sound and Vibration 1998, 214, 17-28.

[4] Y. S. Lin, C. S. Pan, and W. Hsu, "Thermally Actuated Bimorph Microactuators." Journal of Chinese Society of Mechanical Engineers 1997, 18, 525-531.

[3] C. S. Pan, and W. Hsu, "An Electro-Thermally and Laterally Driven Polysilicon Microactuator." Journal of Micromechanics and Microengineering 1997, 7, 7-13.

[2] M. H. Wu, J. Y. Ho, and W. Hsu, "General Equations of a Helical Spring with a Cup Damper and Static Verification." ASME Journal of Mechanical Design 1997, 119, 319-326.

[1] W. Hsu and A.P. Pisano, "Modeling of a Finger-Follower Cam System with Verification in Contact Forces." ASME Journal of Mechanical Design 1996, 118, 132-137.