PUBLICATIONS
Journal Papers
Journal Papers
[70] M.-S. Lee, W. Hsu, H.-Y. Huang, H.-Y. Tseng, C.-T. Lee, C.-Y. Hsu,Y.-C. Hsieh,S.-H.Wang,D.-J. Yao and C.-H.Liu, "Simultaneous detection of two growth factors from human single-embryo culture medium by a bead-based digital microfluidic chip," Journal of Biosensors and Bioelectronics 2020, 150 ,111581
[70] M.-S. Lee, W. Hsu, H.-Y. Huang, H.-Y. Tseng, C.-T. Lee, C.-Y. Hsu,Y.-C. Hsieh,S.-H.Wang,D.-J. Yao and C.-H.Liu, "Simultaneous detection of two growth factors from human single-embryo culture medium by a bead-based digital microfluidic chip," Journal of Biosensors and Bioelectronics 2020, 150 ,111581
[69] T.-H. Wong, M.-S. Lee, S.-Y. Wu, W. Hsu, T.-K. Chung, C.-P. Wu, P.-J. Hsu, and Y.-S. Yang. "Novel Passive Two-Stage Magnetic Targeting Devices for Distal Locking of Interlocking Nails," Journal of Healthcare Engineering 2017, 2017, 3619403.
[69] T.-H. Wong, M.-S. Lee, S.-Y. Wu, W. Hsu, T.-K. Chung, C.-P. Wu, P.-J. Hsu, and Y.-S. Yang. "Novel Passive Two-Stage Magnetic Targeting Devices for Distal Locking of Interlocking Nails," Journal of Healthcare Engineering 2017, 2017, 3619403.
[68] Y.-B. Wang, L.-Y. Su, C.-S. Fu, C.-S. Huang, and W. Hsu. "Droplet-based label-free detection system based on guided-mode resonance and electrowetting-on-dielectric for concentration measurement," Japanese Journal of Applied Physics 2017, 56, 5.
[68] Y.-B. Wang, L.-Y. Su, C.-S. Fu, C.-S. Huang, and W. Hsu. "Droplet-based label-free detection system based on guided-mode resonance and electrowetting-on-dielectric for concentration measurement," Japanese Journal of Applied Physics 2017, 56, 5.
[67] Y.-B. Wang, J.-H. Huang, M.-S. Lee, C.-Y. Huang, C.-S. Huang, I. Yamashita, Y.-Y. Tu, and W. Hsu, "An EWOD-based micro diluter with high flexibility on dilution ratio," Microsystem Technologies 2016. (In Press)
[66] Y.-C. Shieh, H.-Y. Lin, W. Hsu, and Y.-H. Lin, "A rapid fatigue test method on micro structures for high cycle fatigue," IEEE Transactions on Device and Materials Reliability 2016, 16, 61-68.
[66] Y.-C. Shieh, H.-Y. Lin, W. Hsu, and Y.-H. Lin, "A rapid fatigue test method on micro structures for high cycle fatigue," IEEE Transactions on Device and Materials Reliability 2016, 16, 61-68.
[65] C.-Y. Huang, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, H.-Y. Huang, S.-K. Fan, D.-J. Yao, C.-H. Liu, and W. Hsu, A highly efficient bead extraction technique with low bead number for digital microfluidic immunoassay," Biomicrofluidics 2016, 10, 011901.
[65] C.-Y. Huang, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, H.-Y. Huang, S.-K. Fan, D.-J. Yao, C.-H. Liu, and W. Hsu, A highly efficient bead extraction technique with low bead number for digital microfluidic immunoassay," Biomicrofluidics 2016, 10, 011901.
[64] K.-W. Chang, P.-Y. Chang, H.-Y. Huang, C.-J. Li, C.-H. Tien, D.-J. Yao, S.-K. Fan, W. Hsu, and C.-H. Liu, "Womb-on-a-Chip Biomimetic System for Improved Embryo Culture and Development," Sensors & Actuators: B. Chemical 2016, 226, 218-226.
[64] K.-W. Chang, P.-Y. Chang, H.-Y. Huang, C.-J. Li, C.-H. Tien, D.-J. Yao, S.-K. Fan, W. Hsu, and C.-H. Liu, "Womb-on-a-Chip Biomimetic System for Improved Embryo Culture and Development," Sensors & Actuators: B. Chemical 2016, 226, 218-226.
[63] C.-Y. Huang, P. Sun, M.-S. Lee, S.-Y. Wu, Y.-C. Shieh, and W. Hsu, "A resettable, wireless and passive fall-down recorder using a magnetic droplet with an LC circuit," IEEE Sensors Journal 2016, 16, 654-661.
[63] C.-Y. Huang, P. Sun, M.-S. Lee, S.-Y. Wu, Y.-C. Shieh, and W. Hsu, "A resettable, wireless and passive fall-down recorder using a magnetic droplet with an LC circuit," IEEE Sensors Journal 2016, 16, 654-661.
[62] S.-Y. Wu, C. Yang, W. Hsu, and L. Lin, "3D-printed microelectronics for integrated circuitry and passive wireless sensors," Microsystems and Nanoengineering 2015, 1, 15013. (Nature Publishing Group, selected as FEATURED ARTICLE)
[62] S.-Y. Wu, C. Yang, W. Hsu, and L. Lin, "3D-printed microelectronics for integrated circuitry and passive wireless sensors," Microsystems and Nanoengineering 2015, 1, 15013. (Nature Publishing Group, selected as FEATURED ARTICLE)
[61] H.-Y. Huang, H.-H. Shen, C.-H. Tien, C.-J. Li, S.-K. Fan, C.-H. Liu, W. Hsu, and D.-J. Yao, "Digital Microfluidic Dynamic Culture of Mammalian Embryos on an Electrowetting on Dielectric (EWOD) Chip." PLoS ONE 2015, 10, e0124196.
[61] H.-Y. Huang, H.-H. Shen, C.-H. Tien, C.-J. Li, S.-K. Fan, C.-H. Liu, W. Hsu, and D.-J. Yao, "Digital Microfluidic Dynamic Culture of Mammalian Embryos on an Electrowetting on Dielectric (EWOD) Chip." PLoS ONE 2015, 10, e0124196.
[60] M.-S. Lee, D.-J. Yao, and W. Hsu, "An Implantable Drug-delivery System on a Chip." Current Topics in Medicinal Chemistry 2015, 15, 1516-1524.
[60] M.-S. Lee, D.-J. Yao, and W. Hsu, "An Implantable Drug-delivery System on a Chip." Current Topics in Medicinal Chemistry 2015, 15, 1516-1524.
[59] C.-Y. Huang, P.-H. Shih, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, H.-Y. Huang, S.-K. Fan, and W. Hsu, "AMPFLUID: aggregation magnified post-assay fluorescence for ultrasensitive immunodetection on digital microfluidics." Proceedings of the IEEE 2015, 103, 225-235.
[59] C.-Y. Huang, P.-H. Shih, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, H.-Y. Huang, S.-K. Fan, and W. Hsu, "AMPFLUID: aggregation magnified post-assay fluorescence for ultrasensitive immunodetection on digital microfluidics." Proceedings of the IEEE 2015, 103, 225-235.
[58] H.-C. Yen, W. Hsu, J.-M. Huang, C.-W. Lu, and C.-N. Hsu, "Development of a High Efficiency In-Line Tube Fan Using CFD." International Journal of Turbo and Jet Engines 2015, 32, 105-115.
[58] H.-C. Yen, W. Hsu, J.-M. Huang, C.-W. Lu, and C.-N. Hsu, "Development of a High Efficiency In-Line Tube Fan Using CFD." International Journal of Turbo and Jet Engines 2015, 32, 105-115.
[57] T.-H. Wong, T.-K. Chung, T.-W. Liu, H.-J. Chu, W. Hsu, P.-C. Yeh, C.-C. Chen, M.-S. Lee, and Y.-S. Yang, "Electromagnetic/Magnetic-Coupled Targeting System for Screw-Hole Locating in Intramedullary Interlocking-Nail Surgery." IEEE Sensors Journal 2014, 14, 4402-4410.
[57] T.-H. Wong, T.-K. Chung, T.-W. Liu, H.-J. Chu, W. Hsu, P.-C. Yeh, C.-C. Chen, M.-S. Lee, and Y.-S. Yang, "Electromagnetic/Magnetic-Coupled Targeting System for Screw-Hole Locating in Intramedullary Interlocking-Nail Surgery." IEEE Sensors Journal 2014, 14, 4402-4410.
[56] S.-Y. Wu, C.-Y. Hung, and W. Hsu, "A wirelessly readable and resettable shock recorder through the integration of LC circuits and MEMS devices." Smart Materials and Structures 2014, 23, 095030.
[56] S.-Y. Wu, C.-Y. Hung, and W. Hsu, "A wirelessly readable and resettable shock recorder through the integration of LC circuits and MEMS devices." Smart Materials and Structures 2014, 23, 095030.
[55] S.-Y. Wu and W. Hsu, "Wireless EWOD/DEP chips powered and controlled through LC circuits and frequency modulation." Lab on a Chip 2014, 14, 3101-3109.
[55] S.-Y. Wu and W. Hsu, "Wireless EWOD/DEP chips powered and controlled through LC circuits and frequency modulation." Lab on a Chip 2014, 14, 3101-3109.
[54] Y.-T. Huang and W. Hsu, "Fabricating embedded SU-8 microstructures with asymmetric inside cross section by double-side multiplepartial exposure method." Microelectronic Engineering 2014, 121, 64-67.
[54] Y.-T. Huang and W. Hsu, "Fabricating embedded SU-8 microstructures with asymmetric inside cross section by double-side multiplepartial exposure method." Microelectronic Engineering 2014, 121, 64-67.
[53] H.-C. Yen, W. Hsu and S.-C. Lin, "Performance enhancement of the in-line fan equipped with the guiding vane and the tail body." Advances in Mechanical Engineering 2014, 2014, 817637.
[53] H.-C. Yen, W. Hsu and S.-C. Lin, "Performance enhancement of the in-line fan equipped with the guiding vane and the tail body." Advances in Mechanical Engineering 2014, 2014, 817637.
[52] Y.-T. Huang, H.-L. Chen, W. Hsu, "An Analytical Model for Calculating the Pull-in Voltage of Micro Cantilever Beams Subjected to Tilted and Curled Effects." Microelectronic Engineering 2014, 125, 73-77.
[52] Y.-T. Huang, H.-L. Chen, W. Hsu, "An Analytical Model for Calculating the Pull-in Voltage of Micro Cantilever Beams Subjected to Tilted and Curled Effects." Microelectronic Engineering 2014, 125, 73-77.
[51] Y.-T. Huang and W. Hsu, "A Simulation Model on Photoresist SU-8 Thickness after Development under Partial Exposure with Reflection Effect." Japanese Journal of Applied Physics 2014, 53, 036505.
[51] Y.-T. Huang and W. Hsu, "A Simulation Model on Photoresist SU-8 Thickness after Development under Partial Exposure with Reflection Effect." Japanese Journal of Applied Physics 2014, 53, 036505.
[50] Y.-H. Lin, Y.-F. Chang, H.-F. Meng, H.-W. Zan, W. Hsu, C.-H. Chen, "Soldering of solution-processed organic vertical transistor and light-emitting diode on separate glass substrates by tin micro-balls." Organic Electronics, 2013, 14, 3052-3060.
[50] Y.-H. Lin, Y.-F. Chang, H.-F. Meng, H.-W. Zan, W. Hsu, C.-H. Chen, "Soldering of solution-processed organic vertical transistor and light-emitting diode on separate glass substrates by tin micro-balls." Organic Electronics, 2013, 14, 3052-3060.
[49] S.-Y. Wu and W. Hsu, "Design and characterization of LC strain sensors with novel inductor for sensitivity enhancement." Smart Materials and Structures 2013, 22, 105015. (selected as FEATURED ARTICLE)
[48] Y.-C. Lee, M.-H. Li, Y.-T. Cheng, W. Hsu, and S.-S. Li, "Electroplated Ni-CNT Nanocomposite for Micromechanical Resonator Applications." IEEE Electron Device Letters 2012, 33, 872-874.
[48] Y.-C. Lee, M.-H. Li, Y.-T. Cheng, W. Hsu, and S.-S. Li, "Electroplated Ni-CNT Nanocomposite for Micromechanical Resonator Applications." IEEE Electron Device Letters 2012, 33, 872-874.
[47] Y.-C. Lee, Y.-T. Cheng and W. Hsu, "Stress Gradient Modification of the Electroplated Ni-Diamond Nanocomposite for MEMS Fabrication." Journal of The Electrochemical Society, 2012, 159, 460-466.
[47] Y.-C. Lee, Y.-T. Cheng and W. Hsu, "Stress Gradient Modification of the Electroplated Ni-Diamond Nanocomposite for MEMS Fabrication." Journal of The Electrochemical Society, 2012, 159, 460-466.
[46] Y.-H. Lin and W. Hsu, "Polymer as the protecting passivation layer in fabricating suspended SCS structures at both anisotropic and isotropic etching." Journal of Micromechanics and Microengineering 2012, 22, 045015.
[46] Y.-H. Lin and W. Hsu, "Polymer as the protecting passivation layer in fabricating suspended SCS structures at both anisotropic and isotropic etching." Journal of Micromechanics and Microengineering 2012, 22, 045015.
[45] S. Chen, C. Chang and W. Hsu, "Improved model of rectangular scratch drive actuator." Journal of Micro/Nanolithography, MEMS, MOEMS 2011, 10, 013016.
[45] S. Chen, C. Chang and W. Hsu, "Improved model of rectangular scratch drive actuator." Journal of Micro/Nanolithography, MEMS, MOEMS 2011, 10, 013016.
[44] S.-K. Fan, H. Yang and W. Hsu, "Droplet-on-a-Wristband: Chip-to-Chip Digital Microfluidic Interfaces between Replaceable and Flexible Electrowetting Modules." Lab on a Chip 2011, 11, 343–347.
[44] S.-K. Fan, H. Yang and W. Hsu, "Droplet-on-a-Wristband: Chip-to-Chip Digital Microfluidic Interfaces between Replaceable and Flexible Electrowetting Modules." Lab on a Chip 2011, 11, 343–347.
[43] C.-H. Wu, W. Hsu, K.-W. Fan, Y.-L. Lin, and Y.-C. Lin, "Optimization of an optical disk manufacturing process for polymer microfluidic substrates by using the design of experiment methodology." Journal of Micro/Nanolithography, MEMS, MOEMS 2010, 9, 031011.
[43] C.-H. Wu, W. Hsu, K.-W. Fan, Y.-L. Lin, and Y.-C. Lin, "Optimization of an optical disk manufacturing process for polymer microfluidic substrates by using the design of experiment methodology." Journal of Micro/Nanolithography, MEMS, MOEMS 2010, 9, 031011.
[42] C.-Y. Yang, Y.-T. Cheng and W. Hsu, "The Investigation of Nano-Roughening Effect on the Reliability Enhancement of Adhesive Bond for NEMS Manufacture Application." IEEE Transactions on Advanced Packaging 2010, 33, 356-361.
[42] C.-Y. Yang, Y.-T. Cheng and W. Hsu, "The Investigation of Nano-Roughening Effect on the Reliability Enhancement of Adhesive Bond for NEMS Manufacture Application." IEEE Transactions on Advanced Packaging 2010, 33, 356-361.
[41] S. Chen, C. Chang, and W. Hsu, "Output Force Enhancement of Scratch Drive Actuator in Low-Voltage Region by Using Flexible Joint." Sensors and Transducers 2010, 115, 71-82.
[41] S. Chen, C. Chang, and W. Hsu, "Output Force Enhancement of Scratch Drive Actuator in Low-Voltage Region by Using Flexible Joint." Sensors and Transducers 2010, 115, 71-82.
[40] C.-W. Chang, W. Hsu, "Three-dimensional micro assembly of a hinged nickel micro device by magnetic lifting and micro resistance welding." Journal of Micromechanics and Microengineering 2009, 19, 105026.
[40] C.-W. Chang, W. Hsu, "Three-dimensional micro assembly of a hinged nickel micro device by magnetic lifting and micro resistance welding." Journal of Micromechanics and Microengineering 2009, 19, 105026.
[39] C.-W. Chang, C.-C. Yeh and W. Hsu, "Experimental investigations and characterization of micro resistance welding with an electro-thermal actuator." Journal of Micromechanics and Microengineering 2009, 19, 025001.
[39] C.-W. Chang, C.-C. Yeh and W. Hsu, "Experimental investigations and characterization of micro resistance welding with an electro-thermal actuator." Journal of Micromechanics and Microengineering 2009, 19, 025001.
[38] C.-S. Huang, Y.-T. Cheng, J. Chung and W. Hsu, 2009, "Investigation of Ni-based Thermal Bimaterial Structure for Sensor and Actuator Application." Sensors and Actuators :A 2009, 149, 298-304.
[38] C.-S. Huang, Y.-T. Cheng, J. Chung and W. Hsu, 2009, "Investigation of Ni-based Thermal Bimaterial Structure for Sensor and Actuator Application." Sensors and Actuators :A 2009, 149, 298-304.
[37] J. Chung, W. Hsu, "Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method." Journal of Micromechanics and Microengineering 2008, 18, 035014.
[37] J. Chung, W. Hsu, "Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method." Journal of Micromechanics and Microengineering 2008, 18, 035014.
[36] P.-L. Cheng, C.-I. Liao, C.-C. Chien, C.-L. Yang, S.-F. Ting, L.-S. Jeng, C.-T. Huang, O. Cheng, S.-F. Tzou, W. Hsu, "Effectiveness of Si thin buffer layer for selective SiGe epitaxial growth in recessed source and drain for pMOS." Materials Chemistry and Physics 2008, 107, 471-475.
[36] P.-L. Cheng, C.-I. Liao, C.-C. Chien, C.-L. Yang, S.-F. Ting, L.-S. Jeng, C.-T. Huang, O. Cheng, S.-F. Tzou, W. Hsu, "Effectiveness of Si thin buffer layer for selective SiGe epitaxial growth in recessed source and drain for pMOS." Materials Chemistry and Physics 2008, 107, 471-475.
[35] J. Chung, and W. Hsu, "Enhancement on forming complex three dimensional microstructures by adouble-side multiple partial exposure method." Journal of Vacuum Science and Technology B 2007, 25, 1671.
[35] J. Chung, and W. Hsu, "Enhancement on forming complex three dimensional microstructures by adouble-side multiple partial exposure method." Journal of Vacuum Science and Technology B 2007, 25, 1671.
[34] S.-K. Fan, H. Yang, T.-T. Wang, and W. Hsu, "Asymmetric Electrowetting - Moving Droplets by a Square Wave." Lab on a Chip 2007, 7, 1330-1335.
[34] S.-K. Fan, H. Yang, T.-T. Wang, and W. Hsu, "Asymmetric Electrowetting - Moving Droplets by a Square Wave." Lab on a Chip 2007, 7, 1330-1335.
[33] C.-H. Wu, C.-H. Chen, K.-W. Fan, W. Hsu and Y.-C. Lin, "Design and fabrication of polymer microfludic substrates using the optical disc process." Sensors and Actuators A: Physical 2007, 139, 310-317.
[33] C.-H. Wu, C.-H. Chen, K.-W. Fan, W. Hsu and Y.-C. Lin, "Design and fabrication of polymer microfludic substrates using the optical disc process." Sensors and Actuators A: Physical 2007, 139, 310-317.
[32] P.-L. Cheng, C.-I. Liao, H.-R. Wu, Y.-C. Chen, C.-C. Chien, C.-L. Yang, S.-F. Tzou, J. Tang, R. Kodali, L. Washington, Y. Cho, V.-C. Chang, T. Fu, and W. Hsu, "Effective surface treatments for selective epitaxial SiGe growth in locally strained pMOSFETs." Journal of Semiconductor Science and Technology 2007, 22, 140-143.
[32] P.-L. Cheng, C.-I. Liao, H.-R. Wu, Y.-C. Chen, C.-C. Chien, C.-L. Yang, S.-F. Tzou, J. Tang, R. Kodali, L. Washington, Y. Cho, V.-C. Chang, T. Fu, and W. Hsu, "Effective surface treatments for selective epitaxial SiGe growth in locally strained pMOSFETs." Journal of Semiconductor Science and Technology 2007, 22, 140-143.
[31] H.-L. Hsu, Y.-R. Chang, Y. Chiu, Y.-H. Lin and W. Hsu, "A novel self-aligned process between anano-aperture and a solid immersion lens for a near-field optical system." Journal of Micromechanics and Microengineering 2006, 16, 2632-2638.
[31] H.-L. Hsu, Y.-R. Chang, Y. Chiu, Y.-H. Lin and W. Hsu, "A novel self-aligned process between anano-aperture and a solid immersion lens for a near-field optical system." Journal of Micromechanics and Microengineering 2006, 16, 2632-2638.
[30] L.-N. Tsai, Y.-T. Cheng, W. Hsu, and W. Fang, "Ni-carbon nanotubes Nanocomposite for Robust microelectromechanical systems fabrication." Journal of Vacuum Science and Technology B 2006, 24, 205-210.
[30] L.-N. Tsai, Y.-T. Cheng, W. Hsu, and W. Fang, "Ni-carbon nanotubes Nanocomposite for Robust microelectromechanical systems fabrication." Journal of Vacuum Science and Technology B 2006, 24, 205-210.
[29] L.-N. Tsai, G.-R. Shen, Y.-T. Cheng, W. Hsu, "Performance Improvement of an Electrothermal Microactuator Fabricated Using Ni-Diamond Nanocomposite." IEEE/ASME Journal of Micro Electro Mechanical Systems 2006, 15, 149-159.
[29] L.-N. Tsai, G.-R. Shen, Y.-T. Cheng, W. Hsu, "Performance Improvement of an Electrothermal Microactuator Fabricated Using Ni-Diamond Nanocomposite." IEEE/ASME Journal of Micro Electro Mechanical Systems 2006, 15, 149-159.
[28] Z.-H. Liang, Y.-T. Cheng, W. Hsu, Y.-W. Lee, "A Wafer-Level Hermetic Encapsulation for MEMS Manufacture Application." IEEE Transaction on Advanced Packaging 2006, 29, 513-519.
[28] Z.-H. Liang, Y.-T. Cheng, W. Hsu, Y.-W. Lee, "A Wafer-Level Hermetic Encapsulation for MEMS Manufacture Application." IEEE Transaction on Advanced Packaging 2006, 29, 513-519.
[27] C.-T. Wu and W. Hsu, "Design and Fabrication of an Electrothermal Microactuator for Multi-level Conveying." Journal of Microsystem Technologies 2006, 12, 293-298.
[27] C.-T. Wu and W. Hsu, "Design and Fabrication of an Electrothermal Microactuator for Multi-level Conveying." Journal of Microsystem Technologies 2006, 12, 293-298.
[26] C. P. Hsu and W. Hsu, "Designand Characterization of Electrothermal Monolithic Long-Stretch Micro Drive with High Output Efficiency." IEEE/ASME Journal of Micro Electro Mechanical Systems 2006, 15, 935-944.
[26] C. P. Hsu and W. Hsu, "Designand Characterization of Electrothermal Monolithic Long-Stretch Micro Drive with High Output Efficiency." IEEE/ASME Journal of Micro Electro Mechanical Systems 2006, 15, 935-944.
[25] Y. Lai, E. V. Bordatchev, S. K. Nikumb, W. Hsu, "Performance Characterization of In-plane Electro-ThermallyDriven Linear Microactuators." Journal of Intelligent Material Systems and Structures 2006, 17, 919-929.
[25] Y. Lai, E. V. Bordatchev, S. K. Nikumb, W. Hsu, "Performance Characterization of In-plane Electro-ThermallyDriven Linear Microactuators." Journal of Intelligent Material Systems and Structures 2006, 17, 919-929.
[24] D.-H. Hwang, K.-P. Chin, Y.-C. Lo, and W. Hsu, "Structure Design of A 2D High-Aspect-Ratio Resonant MicrobeamAccelerometer." SPIE Journal of Microlithography, Microfabrication, and Microsystems 2005, 4, 033009.
[24] D.-H. Hwang, K.-P. Chin, Y.-C. Lo, and W. Hsu, "Structure Design of A 2D High-Aspect-Ratio Resonant MicrobeamAccelerometer." SPIE Journal of Microlithography, Microfabrication, and Microsystems 2005, 4, 033009.
[23] C.-S. Lin, S.-Y. Wen, and W. Hsu, "Variable Optical Attenuator with Tunable Nonsmooth Curved Mirror." Japanese Journal of Applied Physics 2004, 43, 7764-7768.
[23] C.-S. Lin, S.-Y. Wen, and W. Hsu, "Variable Optical Attenuator with Tunable Nonsmooth Curved Mirror." Japanese Journal of Applied Physics 2004, 43, 7764-7768.
[22] C.-H. Ho and W. Hsu, "Experimental investigation on an embedded root method for stripping SU-8 photoresistin UV-LIGA process." Journal of Micromechanics and Microengineering 2004, 14, 356-364.
[22] C.-H. Ho and W. Hsu, "Experimental investigation on an embedded root method for stripping SU-8 photoresistin UV-LIGA process." Journal of Micromechanics and Microengineering 2004, 14, 356-364.
[21] C. Hsu and W. Hsu, "Instability on micromachined curved thermal bimorph structures." Journal of Micromechanics and Microengineering, 2003, 13, 955-962.
[21] C. Hsu and W. Hsu, "Instability on micromachined curved thermal bimorph structures." Journal of Micromechanics and Microengineering, 2003, 13, 955-962.
[20] C.-C. Lee and W. Hsu, "Method on surface roughness modification to alleviate stiction of microstructures." Journal of Vacuum Science and Technology B 2003, 21, 1505.
[20] C.-C. Lee and W. Hsu, "Method on surface roughness modification to alleviate stiction of microstructures." Journal of Vacuum Science and Technology B 2003, 21, 1505.
[19] C.-H. Tien, H.-L. Chou, Y. Chiu, W. Hsu, T. D. Milster, Y.-C. Lai, and H.-P. D. Shieh, "Fiber-Lens-based Module for Optical Recording Applications." Japanese Journal of Applied Physics 2003, 42, 4345-4348.
[19] C.-H. Tien, H.-L. Chou, Y. Chiu, W. Hsu, T. D. Milster, Y.-C. Lai, and H.-P. D. Shieh, "Fiber-Lens-based Module for Optical Recording Applications." Japanese Journal of Applied Physics 2003, 42, 4345-4348.
[18] U. Lu, C. P. Hu, Y. C. Shih, Y. H. Yang, C. Y. Wu, C. J. Yuan, M. D. Ker, T. K. Wu, Y. K. Li, Y. Z. Hsieh, W. Hsu, and C.T. Lin, "CMOS Chip as Luminescent Sensors for Biochemical Reactions." IEEE Sensors Journal 2003, 3, 310-316.
[18] U. Lu, C. P. Hu, Y. C. Shih, Y. H. Yang, C. Y. Wu, C. J. Yuan, M. D. Ker, T. K. Wu, Y. K. Li, Y. Z. Hsieh, W. Hsu, and C.T. Lin, "CMOS Chip as Luminescent Sensors for Biochemical Reactions." IEEE Sensors Journal 2003, 3, 310-316.
[17] H. C. Liu, Y. H. Lin, and W. Hsu, "Sidewall Roughness Control in Advanced Silicon Etch Process." Journal of Microsystem Technologies 2003, 10, 29-34.
[17] H. C. Liu, Y. H. Lin, and W. Hsu, "Sidewall Roughness Control in Advanced Silicon Etch Process." Journal of Microsystem Technologies 2003, 10, 29-34.
[16] C. C. Lee and W. Hsu, "Optimizationof an Electro-thermally and Laterally Driven Microactuator." Journal of Microsystem Technologies 2003, 9, 331-334.
[16] C. C. Lee and W. Hsu, "Optimizationof an Electro-thermally and Laterally Driven Microactuator." Journal of Microsystem Technologies 2003, 9, 331-334.
[15] B. Lee and W. Hsu, "Modelling of a Planar Derailleur System on Bicycles with Experimental Verification." Int. Journal of Vehicle Design 2002, 30, 263-278.
[15] B. Lee and W. Hsu, "Modelling of a Planar Derailleur System on Bicycles with Experimental Verification." Int. Journal of Vehicle Design 2002, 30, 263-278.
[14] C. T. Wu and W. Hsu, "An Electro-thermally Driven Microactuator with Two Dimensional Motion." Journal of Microsystem Technologies 2002, 8, 47-50.
[14] C. T. Wu and W. Hsu, "An Electro-thermally Driven Microactuator with Two Dimensional Motion." Journal of Microsystem Technologies 2002, 8, 47-50.
[13] C. S. Pan and W. Hsu, "Electro-thermally Driven Microgrippers with Bilateral Motion." Journal of Chinese Society of Mechanical Engineers 2001, 22, 71-78.
[13] C. S. Pan and W. Hsu, "Electro-thermally Driven Microgrippers with Bilateral Motion." Journal of Chinese Society of Mechanical Engineers 2001, 22, 71-78.
[12] C. Hsu and W. Hsu, "A Two-way Membrane-type Micro Actuator with Continuous Deflection." Journal of Micromechanics and Microengineering 2000, 10, 387-394.
[12] C. Hsu and W. Hsu, "A Two-way Membrane-type Micro Actuator with Continuous Deflection." Journal of Micromechanics and Microengineering 2000, 10, 387-394.
[11] M. F. Wu and W. Hsu, "Thermally Driven Polysilicon Actuators for Lateral Displacement." Journal of Intelligent Material Systems and Structures 1999, 10, 402-409.
[11] M. F. Wu and W. Hsu, "Thermally Driven Polysilicon Actuators for Lateral Displacement." Journal of Intelligent Material Systems and Structures 1999, 10, 402-409.
[10] M. H. Wu and W. Hsu, "Investigation of Torsion Springs by Considering the Friction and the End Effect." ASME, Journal of Mechanical Design 1999, 121, 628-633.
[10] M. H. Wu and W. Hsu, "Investigation of Torsion Springs by Considering the Friction and the End Effect." ASME, Journal of Mechanical Design 1999, 121, 628-633.
[9] C. S. Pan and W. Hsu, "A Microstructure for the in situ Determination of Residual Strain." IEEE/ASME Journal of Microelectromechanical Systems 1999, 8, 200-207.
[9] C. S. Pan and W. Hsu, "A Microstructure for the in situ Determination of Residual Strain." IEEE/ASME Journal of Microelectromechanical Systems 1999, 8, 200-207.
[8] P. L. Cheng and W. Hsu, "Design and Fabrication of A Strain-Type Atomic Force Micro Probe." Journal of Chinese Society of Mechanical Engineers 1999, 20, 1-9.
[8] P. L. Cheng and W. Hsu, "Design and Fabrication of A Strain-Type Atomic Force Micro Probe." Journal of Chinese Society of Mechanical Engineers 1999, 20, 1-9.
[7] P. Wu and W. Hsu, "Investigation of the Four-Bar Linkage in a Rear Derailleur System with Experimental Verification." International Journal of Vehicle Design 1998, 19, 454-471.
[7] P. Wu and W. Hsu, "Investigation of the Four-Bar Linkage in a Rear Derailleur System with Experimental Verification." International Journal of Vehicle Design 1998, 19, 454-471.
[6] J. J. Liou, G. Huang, and W. Hsu, "Experimental Study of A Variable Pressure Damper on Automotive Valve Train." ASME Journal of Mechanical Design 1998, 120, 279-281.
[6] J. J. Liou, G. Huang, and W. Hsu, "Experimental Study of A Variable Pressure Damper on Automotive Valve Train." ASME Journal of Mechanical Design 1998, 120, 279-281.
[5] M. H. Wu, and W. Hsu, "Modelingthe Static and Dynamic Behavior of A Conical Spring by Considering the Coil Closeand the Damping Effects." Journal of Sound and Vibration 1998, 214, 17-28.
[5] M. H. Wu, and W. Hsu, "Modelingthe Static and Dynamic Behavior of A Conical Spring by Considering the Coil Closeand the Damping Effects." Journal of Sound and Vibration 1998, 214, 17-28.
[4] Y. S. Lin, C. S. Pan, and W. Hsu, "Thermally Actuated Bimorph Microactuators." Journal of Chinese Society of Mechanical Engineers 1997, 18, 525-531.
[4] Y. S. Lin, C. S. Pan, and W. Hsu, "Thermally Actuated Bimorph Microactuators." Journal of Chinese Society of Mechanical Engineers 1997, 18, 525-531.
[3] C. S. Pan, and W. Hsu, "An Electro-Thermally and Laterally Driven Polysilicon Microactuator." Journal of Micromechanics and Microengineering 1997, 7, 7-13.
[3] C. S. Pan, and W. Hsu, "An Electro-Thermally and Laterally Driven Polysilicon Microactuator." Journal of Micromechanics and Microengineering 1997, 7, 7-13.
[2] M. H. Wu, J. Y. Ho, and W. Hsu, "General Equations of a Helical Spring with a Cup Damper and Static Verification." ASME Journal of Mechanical Design 1997, 119, 319-326.
[2] M. H. Wu, J. Y. Ho, and W. Hsu, "General Equations of a Helical Spring with a Cup Damper and Static Verification." ASME Journal of Mechanical Design 1997, 119, 319-326.
[1] W. Hsu and A.P. Pisano, "Modeling of a Finger-Follower Cam System with Verification in Contact Forces." ASME Journal of Mechanical Design 1996, 118, 132-137.
[1] W. Hsu and A.P. Pisano, "Modeling of a Finger-Follower Cam System with Verification in Contact Forces." ASME Journal of Mechanical Design 1996, 118, 132-137.
Conference Papers
Conference Papers
[116] L.-Y. Su, C.-S. Fu, Y.-B. Wang, C.-S. Huang, and W. Hsu (July 2016). Integration of Photonic Crystal and Electrowetting-on-dielectric Microfluidics for Concentration Measurement. The 6th International Multidisciplinary Conference on Optofluidics (Optofluidics 2016), Beijing, China. (Best Poster Award)
[115] M.-S. Lee, C.-Y. Huang, and W. Hsu (June 2016). Low-cost EWOD devices using commercial aluminum foil. The 10th International Meeting on Electrowetting (Electrowetting 2016), Taipei, Taiwan.
[114] M.-S. Lee, P.-J. Hsu, A. Sun, T.-H. Wong, W. Hsu, and T.-K. Chung (October 2015). A Removable Mechanism for Positioning Magnet for Distal Locking in Intramedullary Nailing Surgery. The 14th International Federation for the Promotion of Mechanism and Machine Science World Congress (IFToMM 2015), Taipei, Taiwan.
[114] M.-S. Lee, P.-J. Hsu, A. Sun, T.-H. Wong, W. Hsu, and T.-K. Chung (October 2015). A Removable Mechanism for Positioning Magnet for Distal Locking in Intramedullary Nailing Surgery. The 14th International Federation for the Promotion of Mechanism and Machine Science World Congress (IFToMM 2015), Taipei, Taiwan.
[113] Y.-B. Wang, M.-S. Lee, J.-H. Huang, C.-Y. Huang, W. Hsu, and Y.-Y. Tu (September 2015). An EWOD mixer with high flexibility on dilution ratio. The 41th International Conference on Micro and Nano Engineering (MNE 2015), The Hague, The Netherlands.
[113] Y.-B. Wang, M.-S. Lee, J.-H. Huang, C.-Y. Huang, W. Hsu, and Y.-Y. Tu (September 2015). An EWOD mixer with high flexibility on dilution ratio. The 41th International Conference on Micro and Nano Engineering (MNE 2015), The Hague, The Netherlands.
[112] Y.-J. Sung, C.-F. Chen, K.-W. Chang, H.-Y. Huang, D.-J. Yao, W. Hsu, S.-K. Fan, and C.-H. Liu (July 2015). A Microfluidic Device for Automatic Trapping and Co‐Culture of Mouse Embryos with Human Endometrial Stromal Cell. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan.
[112] Y.-J. Sung, C.-F. Chen, K.-W. Chang, H.-Y. Huang, D.-J. Yao, W. Hsu, S.-K. Fan, and C.-H. Liu (July 2015). A Microfluidic Device for Automatic Trapping and Co‐Culture of Mouse Embryos with Human Endometrial Stromal Cell. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan.
[111] Y.-H. Chung, C.-Y. Huang, P.-Y. Tsai, H.-Y. Hsu, and W. Hsu (July 2015). Investigation of three-dimension bead aggregation effect for optical sensing in digital microfluidics platform. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan.
[111] Y.-H. Chung, C.-Y. Huang, P.-Y. Tsai, H.-Y. Hsu, and W. Hsu (July 2015). Investigation of three-dimension bead aggregation effect for optical sensing in digital microfluidics platform. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan.
[110] H.-W. Tsai, C.-Y. Huang, C.-H. Chen, and W. Hsu (July 2015). Durability investigation of hydrophobic films for digital microfluidics. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan.
[109] J.-H. Huang, H.-W. Tsai, Y.-B. Wang, C.-Y. Huang, C.-H. Chen, and W. Hsu (July 2015). Volume analysis of creating droplets on different hydrophobic materials in digital microfluidics platform. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan.
[109] J.-H. Huang, H.-W. Tsai, Y.-B. Wang, C.-Y. Huang, C.-H. Chen, and W. Hsu (July 2015). Volume analysis of creating droplets on different hydrophobic materials in digital microfluidics platform. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan.
[108] Y.-B. Wang, M.-H. Siao, C.-Y. Huang, and W. Hsu (July 2015). A novel inclined lipid bilayer formation based on DIB method. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan. (Best Poster Paper Finalist)
[108] Y.-B. Wang, M.-H. Siao, C.-Y. Huang, and W. Hsu (July 2015). A novel inclined lipid bilayer formation based on DIB method. The 5th International Conference on Optofluidics (Optofluidics 2015), Taipei, Taiwan. (Best Poster Paper Finalist)
[107] S.-Y. Wu, C. Yang, W. Hsu, and L. Lin (June 2015). RF Wireless LC Tank Sensors Fabricated by 3D Additive Manufacturing. The 18th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2015), Alaska, USA. (blind review)
[107] S.-Y. Wu, C. Yang, W. Hsu, and L. Lin (June 2015). RF Wireless LC Tank Sensors Fabricated by 3D Additive Manufacturing. The 18th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2015), Alaska, USA. (blind review)
[106] C.-H. Liu, K.-W. Chang, P.-Y. Chang, Y.-J. Sung, H.-Y. Huang, D.-J. Yao, S.-K. Fan, W. Hsu, and C.-J. Li (June 2015). Embryo lab chip taking advantage of microfluidics and cell co-culturing. The 18th International Conference on Solid-State Sensors, Actuators and Microsystems, Alaska, USA. (blind review)
[106] C.-H. Liu, K.-W. Chang, P.-Y. Chang, Y.-J. Sung, H.-Y. Huang, D.-J. Yao, S.-K. Fan, W. Hsu, and C.-J. Li (June 2015). Embryo lab chip taking advantage of microfluidics and cell co-culturing. The 18th International Conference on Solid-State Sensors, Actuators and Microsystems, Alaska, USA. (blind review)
[105] C. Yang, S.-Y. Wu, C. Glick, Y. Choi, W. Hsu, and L. Lin (January 2015). 3D PRINTED RF PASSIVE COMPONENTS BY LIQUID METAL FILLING. The 28th IEEE International Conference on Micro Electro Mechanical Systems, Estoril, Portugal. (blind review)
[105] C. Yang, S.-Y. Wu, C. Glick, Y. Choi, W. Hsu, and L. Lin (January 2015). 3D PRINTED RF PASSIVE COMPONENTS BY LIQUID METAL FILLING. The 28th IEEE International Conference on Micro Electro Mechanical Systems, Estoril, Portugal. (blind review)
[104] M.-H. Siao, H.-Y. Lin, C.-Y. Huang, W. Hsu (November 2014). Lipid Bilayer Formation by Moving Magnetic Droplet with Magnetic Force. The 8th IEEE International Conference on Nano/Molecular Medicine and Engineering, Kaohsiung, Taiwan.
[104] M.-H. Siao, H.-Y. Lin, C.-Y. Huang, W. Hsu (November 2014). Lipid Bilayer Formation by Moving Magnetic Droplet with Magnetic Force. The 8th IEEE International Conference on Nano/Molecular Medicine and Engineering, Kaohsiung, Taiwan.
[103] Y.-C. Shieh, H.-Y. Lin, W. Hsu, and Y.-H. Lin (September 2014). A rapid high-cycle fatigue test method for microstructure. The 40th International Conference on Micro and Nano Engineering, Lausanne, Switzerland.
[103] Y.-C. Shieh, H.-Y. Lin, W. Hsu, and Y.-H. Lin (September 2014). A rapid high-cycle fatigue test method for microstructure. The 40th International Conference on Micro and Nano Engineering, Lausanne, Switzerland.
[102] Y.-H. Chung, P.-Y. Tsai, C.-Y. Huang, H.-Y. Hsu, and W. Hsu (September 2014). Effects of gap size and bead aggregation on fluorescence detection intensity in digital microfluidic immunoassay. The 40th International Conference on Micro and Nano Engineering, Lausanne, Switzerland.
[102] Y.-H. Chung, P.-Y. Tsai, C.-Y. Huang, H.-Y. Hsu, and W. Hsu (September 2014). Effects of gap size and bead aggregation on fluorescence detection intensity in digital microfluidic immunoassay. The 40th International Conference on Micro and Nano Engineering, Lausanne, Switzerland.
[101] S.-Y. Wu, C.-Y. Hung, Y.-C. Shieh, and W. Hsu (April 2014). Wireless Shock Recording through The Integration of LC Circuits and Micro Mechanical-latch Switch. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[101] S.-Y. Wu, C.-Y. Hung, Y.-C. Shieh, and W. Hsu (April 2014). Wireless Shock Recording through The Integration of LC Circuits and Micro Mechanical-latch Switch. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[100] S.-Y. Wu, C.-Y. Hung, and W. Hsu (April 2014). A Wireless Micro Thermal Actuator Powered through LC Circuits. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[100] S.-Y. Wu, C.-Y. Hung, and W. Hsu (April 2014). A Wireless Micro Thermal Actuator Powered through LC Circuits. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[99] Y.-B. Wang, Y.-H. Lin, and W. Hsu (April 2014). Spin coating of uniform photoresist for pattern transfer on micromachined 3-D surfaces. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[99] Y.-B. Wang, Y.-H. Lin, and W. Hsu (April 2014). Spin coating of uniform photoresist for pattern transfer on micromachined 3-D surfaces. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[98] C.-Y. Huang, P.-H. Shih, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, S.-K. Fan, and W. Hsu (April 2014). Enhanced fluorescence detection through post-immunoassay beads aggregation on bead-based immunoassay using digital microfluidics. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[98] C.-Y. Huang, P.-H. Shih, P.-Y. Tsai, I-C. Lee, H.-Y. Hsu, S.-K. Fan, and W. Hsu (April 2014). Enhanced fluorescence detection through post-immunoassay beads aggregation on bead-based immunoassay using digital microfluidics. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[97] P.-Y. Tsai, C.-Y. Huang, H.-Y. Hsu, and W. Hsu (April 2014). Low bead number washing for bead-based immunoassay using double sided EWOD and magnetic force. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[97] P.-Y. Tsai, C.-Y. Huang, H.-Y. Hsu, and W. Hsu (April 2014). Low bead number washing for bead-based immunoassay using double sided EWOD and magnetic force. The 9th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Hawaii, U.S.A..
[96] C.-Y. Huang, M.-Y. Chiang, S.-K. Fan, A. M. Ghaemmaghami, and W. Hsu (April 2013). Label-Free Separation and Sorting of Human Monocytes and T-cells by Electrowetting and Dielectrophoresis. The 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Suzhou, China.
[95] T.-K. Chung, H.-J. Chu, T.-H. Wong, Y.-W. Cheng, W. Hsu, and M.-S. Lee (March 2013). Electromagnetic Coil/Inductance-Based Nondestructive Methods for Locating Distal Screw-Holes of an Intramedullary Interlocking-Nail. 2013 SPIE Conference on Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego, U.S.A..
[94] T.-M. Chuo, P.-H. Shih, W. Hsu, C.-Y. Huang, Y.-S. Huang, Y.-T. Chen, and S.-K. Fan (November 2012). Signal Enhancement by Particle Concentration Using Dielectrophoresis in an Electrowetting-driven Droplet. The 6th IEEE International Conference on Nano/Molecular Medicine and Engineering, Bangkok, Thailand. (Best Student Paper Finalist)
[93] T.-K. Chung, H.-J. Chu, T.-H. Wong, W. Hsu, M.-S. Lee, W.-T. Lo, and C.-Y. Tseng (October 2012). An Electromagnetic-Induction Approach for Screw-Hole Targeting in Interlocking-Nail Surgery. IEEE Conference on Sensors, Taipei, Taiwan.
[92] K.-Y. Jiang, H.-L. Chen, W. Hsu, Y.-K. Lee, Y.-W. Miao, Y.-C. Shieh, and C.-Y. Hung (October 2012). A Novel Suspension Design for MEMS Sensing Device to Eliminate Planar Spring Constants Mismatch. The 11th IEEE Conference on Sensors, Taipei, Taiwan.
[92] K.-Y. Jiang, H.-L. Chen, W. Hsu, Y.-K. Lee, Y.-W. Miao, Y.-C. Shieh, and C.-Y. Hung (October 2012). A Novel Suspension Design for MEMS Sensing Device to Eliminate Planar Spring Constants Mismatch. The 11th IEEE Conference on Sensors, Taipei, Taiwan.
[91] Y.-C. Shieh, R.-P. Ma, W. Hsu, Y.-H. Lin, and Y.-H. Tang (October 2012). A Reversible Micro Mechanical-latch Shock Switch by External Magnetic Field. The 11th IEEE Conference on Sensors, Taipei, Taiwan.
[91] Y.-C. Shieh, R.-P. Ma, W. Hsu, Y.-H. Lin, and Y.-H. Tang (October 2012). A Reversible Micro Mechanical-latch Shock Switch by External Magnetic Field. The 11th IEEE Conference on Sensors, Taipei, Taiwan.
[90] M.-S. Lee, S.-Y. Wu, T.-H. Wong, W. Hsu, T.-K. Chung (October 2012). A Novel Guiding Device for Distal Locking of Intramedullary Nails. The 11th IEEE Conference on Sensors, Taipei, Taiwan.
[89] Y.-H. Lin, C. J. Weng, C. Y. Su, and W. Hsu (March 2012). Fabrication of Deep Lateral Single-Crystal-Silicon Blaze Micro-grating by Inductively-Coupled-Plasma Reactive Ion Etch, The 7th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Kyoto, Japan.
[88] C.-Y. Huang, H.-Y. Ho, S.-K. Fan, and W. Hsu (March 2012). General digital microfluidic platform: capillary electrophoresis-based separation of micro-particle in electric-field-controlled virtual microchannel. Taiwan Scientific Symposium, Birmingham, UK.
[88] C.-Y. Huang, H.-Y. Ho, S.-K. Fan, and W. Hsu (March 2012). General digital microfluidic platform: capillary electrophoresis-based separation of micro-particle in electric-field-controlled virtual microchannel. Taiwan Scientific Symposium, Birmingham, UK.
[87] T.-M. Chuo, S.-K. Fan, and W. Hsu (March 2012). Development of Microbead-based Affinity Biosensor by Insulator-Based Dielectrophoresis, The 7th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Kyoto, Japan.
[87] T.-M. Chuo, S.-K. Fan, and W. Hsu (March 2012). Development of Microbead-based Affinity Biosensor by Insulator-Based Dielectrophoresis, The 7th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Kyoto, Japan.
[86] S.-Y. Wu and W. Hsu (October 2011). Sensitivity Enhancement of LC Sensors with Novel Inductor Design, The 10th IEEE Conference on Sensors, Limerick, Ireland.
[86] S.-Y. Wu and W. Hsu (October 2011). Sensitivity Enhancement of LC Sensors with Novel Inductor Design, The 10th IEEE Conference on Sensors, Limerick, Ireland.
[85] C.-Y. Huang, S.-K. Fan, and W. Hsu (October 2011). Capillary Electrophoresis in Virtual Microchannel Based on Dielectrophoresis, The 15th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Seattle, U.S.A..
[85] C.-Y. Huang, S.-K. Fan, and W. Hsu (October 2011). Capillary Electrophoresis in Virtual Microchannel Based on Dielectrophoresis, The 15th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Seattle, U.S.A..
[84] C.-H. Chung, R.-P. Ma, Y.-C. Shieh, and W. Hsu (June 2011). A Robust Micro Mechanical-latch Shock Switch with Low Contact Resistance, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, China.
[84] C.-H. Chung, R.-P. Ma, Y.-C. Shieh, and W. Hsu (June 2011). A Robust Micro Mechanical-latch Shock Switch with Low Contact Resistance, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, China.
[83] C.-Y. Huang, S.-K. Fan, and W. Hsu (February 2011). Electroosmotic Flow Control in a Virtual Microchannel Based on Liquid Dielectrophoresis, The 6th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Kaohsiung, Taiwan.
[83] C.-Y. Huang, S.-K. Fan, and W. Hsu (February 2011). Electroosmotic Flow Control in a Virtual Microchannel Based on Liquid Dielectrophoresis, The 6th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Kaohsiung, Taiwan.
[81] S. Chen, C. Chang, and W. Hsu (July 2010). Output Force Characterization of Scratch Drive Actuators with Flexible Joints, 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology, Perth, West Australia.
[80] Y.-H. Lin and W. Hsu (July 2010). Feasibility Study on Using Polymer as Protecting Material in Fabricating Suspended Single-Crystal-Silicon Microstructures, 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology, Perth, West Australia.
[80] Y.-H. Lin and W. Hsu (July 2010). Feasibility Study on Using Polymer as Protecting Material in Fabricating Suspended Single-Crystal-Silicon Microstructures, 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology, Perth, West Australia.
[79] H.-Y. Lin, Y.-C. Lee, and W. Hsu (July 2010). A Rapid Fatigue Test Method on Microstructures, 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology, West Australia.
[79] H.-Y. Lin, Y.-C. Lee, and W. Hsu (July 2010). A Rapid Fatigue Test Method on Microstructures, 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology, West Australia.
[78] H.-Y. Hu, C.-Y. Huang, S.-K. Fan, and W. Hsu (October 2009). Electroosmotic Flow in Dielectrophoresis-Formed Microchannel, The 3rd IEEE International Conference on Nano/Molecular Medicine and Engineering, Tainan, Taiwan.
[78] H.-Y. Hu, C.-Y. Huang, S.-K. Fan, and W. Hsu (October 2009). Electroosmotic Flow in Dielectrophoresis-Formed Microchannel, The 3rd IEEE International Conference on Nano/Molecular Medicine and Engineering, Tainan, Taiwan.
[77] C.-S. Huang, Y.-T. Cheng, C.-J. Yeh, H.-K. Liu, and W. Hsu (June 2009). Young’s modulus and fatigue lifetime improvements by diamond size effect on electroplated Ni-diamond nanocomposite, The 15th International Conference on Solid-State Sensors, Actuators and Microsystems, Denver, U.S.A..
[77] C.-S. Huang, Y.-T. Cheng, C.-J. Yeh, H.-K. Liu, and W. Hsu (June 2009). Young’s modulus and fatigue lifetime improvements by diamond size effect on electroplated Ni-diamond nanocomposite, The 15th International Conference on Solid-State Sensors, Actuators and Microsystems, Denver, U.S.A..
[76] H. Yang, S.-K. Fan, and W. Hsu (January 2008). Connecting interface for modularization of digital microfluidics, SPIE Symposium on MOEMS-MEMS, San Jose, U.S.A..
[76] H. Yang, S.-K. Fan, and W. Hsu (January 2008). Connecting interface for modularization of digital microfluidics, SPIE Symposium on MOEMS-MEMS, San Jose, U.S.A..
[75] C.-W. Chang and W. Hsu (January 2008). Characterization of microresistance welding with electro-thermal actuator for micro assembly, SPIE Symposium on MOEMS-MEMS, San Jose, U.S.A..
[75] C.-W. Chang and W. Hsu (January 2008). Characterization of microresistance welding with electro-thermal actuator for micro assembly, SPIE Symposium on MOEMS-MEMS, San Jose, U.S.A..
[74] H. Yang, W. Hsu, and S.-K. Fan (January 2008). Wristand-like droplet platform by digital microfluidic modulation, The 21th IEEE International Conference on Micro Electro Mechanical Systems, Tucson, U.S.A..
[74] H. Yang, W. Hsu, and S.-K. Fan (January 2008). Wristand-like droplet platform by digital microfluidic modulation, The 21th IEEE International Conference on Micro Electro Mechanical Systems, Tucson, U.S.A..
[73] J. Chung, Y.-C. Lee, and W. Hsu (January 2008). Fabrication of polymer-based vertical comb drive using a double-side multiple partial exposure method, The 21th IEEE International Conference on Micro Electro Mechanical Systems, Tucson, U.S.A..
[73] J. Chung, Y.-C. Lee, and W. Hsu (January 2008). Fabrication of polymer-based vertical comb drive using a double-side multiple partial exposure method, The 21th IEEE International Conference on Micro Electro Mechanical Systems, Tucson, U.S.A..
[72] J.-H. Wei, W. Hsu, and S.-K. Fan (August 2007). Transporting and Heating Droplets by AC Electric Fields on a EWOD-Based Parallel Plate Device, The 1st IEEE International Conference on Nano/Molecular Medicine and Engineering, Macau, China.
[72] J.-H. Wei, W. Hsu, and S.-K. Fan (August 2007). Transporting and Heating Droplets by AC Electric Fields on a EWOD-Based Parallel Plate Device, The 1st IEEE International Conference on Nano/Molecular Medicine and Engineering, Macau, China.
[71] C.-P. Chiu, P.-W. Huang, S.-K. Fan, J.-H. Wei, and W. Hsu (May 2007). Reflective electronic-paper display utilizing electric polarized particle chains, Society for Information Display (SID) International Symposium, Long Beach, U.S.A..
[71] C.-P. Chiu, P.-W. Huang, S.-K. Fan, J.-H. Wei, and W. Hsu (May 2007). Reflective electronic-paper display utilizing electric polarized particle chains, Society for Information Display (SID) International Symposium, Long Beach, U.S.A..
[70] Y.-S. Lin and W. Hsu (January 2007). A Novel Fabrication Method of Microlens Array by Surface Tension and Injection Process, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[70] Y.-S. Lin and W. Hsu (January 2007). A Novel Fabrication Method of Microlens Array by Surface Tension and Injection Process, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[69] J. Chung and W. Hsu (January 2007). Fabrication of 3D Photoresist Microstructures for the Polymer Vertical Comb Drive, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[69] J. Chung and W. Hsu (January 2007). Fabrication of 3D Photoresist Microstructures for the Polymer Vertical Comb Drive, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[68] J.-H. Wei, W. Hsu and S.-K. Fan (January 2007). Realizing Temperature-Controlled Digital Microfluidic Chips with Versatile Microelectrodes, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[68] J.-H. Wei, W. Hsu and S.-K. Fan (January 2007). Realizing Temperature-Controlled Digital Microfluidic Chips with Versatile Microelectrodes, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[67] C.-C. Yeh, J. Chung, C.-W. Chang and W. Hsu (January 2007). Micro Assembly by Micro Resistance Welding with Electro-Thermal Actuators, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[67] C.-C. Yeh, J. Chung, C.-W. Chang and W. Hsu (January 2007). Micro Assembly by Micro Resistance Welding with Electro-Thermal Actuators, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[66] C.-S. Huang, J. Chung, Y.-T. Cheng and W. Hsu (January 2007). Thermal Bimetallic Microactuators by Ni and Ni-diamond Nanocomposite, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[66] C.-S. Huang, J. Chung, Y.-T. Cheng and W. Hsu (January 2007). Thermal Bimetallic Microactuators by Ni and Ni-diamond Nanocomposite, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand.
[65] Y.-C. Lee, L.-N. Tsai, Y.-T. Cheng and W. Hsu (June 2006). Performance Enhancement of Comb Drive Actuator Utilizing Electroplated Nickel-Diamond Nanocomposite, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[65] Y.-C. Lee, L.-N. Tsai, Y.-T. Cheng and W. Hsu (June 2006). Performance Enhancement of Comb Drive Actuator Utilizing Electroplated Nickel-Diamond Nanocomposite, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[64] J.-W. Chung, Y.-Y. Teng, and W. Hsu (June 2006). Characterization of Electroplated Nickel Films at Different Thickness, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[64] J.-W. Chung, Y.-Y. Teng, and W. Hsu (June 2006). Characterization of Electroplated Nickel Films at Different Thickness, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[63] C.-W. Chang and W. Hsu (June 2006). A Bio-compatible Microgripper Operated in Aqueous Environment, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[63] C.-W. Chang and W. Hsu (June 2006). A Bio-compatible Microgripper Operated in Aqueous Environment, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[62] C.-H. Wu, C.-H. Chen, K.-W. Fan, W. Hsu and Y.-C. Lin (June 2006). Design and Fabrication of Polymer Microfluidic Platform by Optical Disc Process, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[62] C.-H. Wu, C.-H. Chen, K.-W. Fan, W. Hsu and Y.-C. Lin (June 2006). Design and Fabrication of Polymer Microfluidic Platform by Optical Disc Process, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[61] H.-L. Hsu, Y.-R. Chang, Y.-H. Lin, and W. Hsu (June 2006). A novel self-aligned process between the nano-aperture and solid immersion lens, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[61] H.-L. Hsu, Y.-R. Chang, Y.-H. Lin, and W. Hsu (June 2006). A novel self-aligned process between the nano-aperture and solid immersion lens, The 3rd Asia-Pacific Conference of Transducers and Micro-Nano Technology, Singapore.
[60] C.-Y. Yang, Y.-T. Cheng and W. Hsu, (January 2006). Nano-Roughening for Reliable N/MEMS Manufacture, The 1st Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Zhuhai, China.
[60] C.-Y. Yang, Y.-T. Cheng and W. Hsu, (January 2006). Nano-Roughening for Reliable N/MEMS Manufacture, The 1st Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Zhuhai, China.
[59] C.-H. Lin, C.-C. Yeh, C.-P. Hsu,and W. Hsu, (November 2005). Design and Fabrication of a Cascaded Electro-Thermal Bimorph Actuator, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, U.S.A..
[59] C.-H. Lin, C.-C. Yeh, C.-P. Hsu,and W. Hsu, (November 2005). Design and Fabrication of a Cascaded Electro-Thermal Bimorph Actuator, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, U.S.A..
[58] H. Yang, S.-K. Fan, and W. Hsu (November 2005). 3D Droplet Transportation by EWOD Actuations on Flexible Polymer Films, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, U.S.A..
[58] H. Yang, S.-K. Fan, and W. Hsu (November 2005). 3D Droplet Transportation by EWOD Actuations on Flexible Polymer Films, ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, U.S.A..
[57] L.-N. Tsai, Y.-T. Cheng, and W. Hsu (January 2005). Nanocomposite Effects on The Coefficient of Thermal Expansion Modification for High Performance Electro-Thermal Microactuator, The 18th IEEE International Conference on Micro Electro Mechanical Systems, Miami, U.S.A..
[57] L.-N. Tsai, Y.-T. Cheng, and W. Hsu (January 2005). Nanocomposite Effects on The Coefficient of Thermal Expansion Modification for High Performance Electro-Thermal Microactuator, The 18th IEEE International Conference on Micro Electro Mechanical Systems, Miami, U.S.A..
[56] E. V. Bordatchev, S. K. Nikumb, and W. Hsu (2004). Laser micromachining of the miniature functional mechanisms, Photonics North 2004: Photonic Applications in Astronomy, Biomedicine, Imaging, Materials Processing, and Education.
[56] E. V. Bordatchev, S. K. Nikumb, and W. Hsu (2004). Laser micromachining of the miniature functional mechanisms, Photonics North 2004: Photonic Applications in Astronomy, Biomedicine, Imaging, Materials Processing, and Education.
[55] C. Chio, S.-H. Hsu, Y.-T. Huang, and W. Hsu (December 2004). Si-based ARROW-B Surface Plasmon Resonance Sensors, International Electronic Devices and Materials Symposia, Hsinchu, Taiwan.
[55] C. Chio, S.-H. Hsu, Y.-T. Huang, and W. Hsu (December 2004). Si-based ARROW-B Surface Plasmon Resonance Sensors, International Electronic Devices and Materials Symposia, Hsinchu, Taiwan.
[54] Y.-R. Chang, Y. Chiu, and W. Hsu (September 2004). Development of Self-alignment Process between SIL/SSIL and Aperture for Near-field Recording Pick-up Head, Asia-Pacific Data Storage Conference, Taoyuan, Taiwan. (Outstanding Poster Award)
[54] Y.-R. Chang, Y. Chiu, and W. Hsu (September 2004). Development of Self-alignment Process between SIL/SSIL and Aperture for Near-field Recording Pick-up Head, Asia-Pacific Data Storage Conference, Taoyuan, Taiwan. (Outstanding Poster Award)
[53] Y.-C. Lo, Y.-H. Wu, C.-H. Huang, H.-W. Liu, C.-H. Lin, J. Lin, W. Hsu, and C. Wang, (August 2004). Sub-microfabrication of Protein Micropatterns for cell biology applications, 2004 IEEE International Conference on MEMS, Nano, Smart Systems, Alberta, Canada.
[53] Y.-C. Lo, Y.-H. Wu, C.-H. Huang, H.-W. Liu, C.-H. Lin, J. Lin, W. Hsu, and C. Wang, (August 2004). Sub-microfabrication of Protein Micropatterns for cell biology applications, 2004 IEEE International Conference on MEMS, Nano, Smart Systems, Alberta, Canada.
[52] Y.-C. Lo, C.-H. Huang, W. Hsu, and C. Wang (August 2004). Neural Guidance by Open-Top SU-8 Microfluidic Channel, 2004 IEEE International Conference on MEMS, Nano, Smart Systems, Alberta, Canada.
[52] Y.-C. Lo, C.-H. Huang, W. Hsu, and C. Wang (August 2004). Neural Guidance by Open-Top SU-8 Microfluidic Channel, 2004 IEEE International Conference on MEMS, Nano, Smart Systems, Alberta, Canada.
[51] L.-N. Tsai, G.-R. Shen, Y.-T. Cheng, and W. Hsu (June 2004). Power and Reliability Improvement of an Electro-Thermal Microactuator Using Ni-Diamond Nanocomposite, The 54th Electronic Components and Technology Conference, Las Vegas, U.S.A..
[51] L.-N. Tsai, G.-R. Shen, Y.-T. Cheng, and W. Hsu (June 2004). Power and Reliability Improvement of an Electro-Thermal Microactuator Using Ni-Diamond Nanocomposite, The 54th Electronic Components and Technology Conference, Las Vegas, U.S.A..
[50] C.-H. Liang, Y.-T. Cheng , W. Hsu, and Y. Lee (June 2004). A Low Temperature Wafer-Level Hermetic Package Using UV Curable Adhesive, The 54th Electronic Components and Technology Conference, Las Vegas, U.S.A..
[50] C.-H. Liang, Y.-T. Cheng , W. Hsu, and Y. Lee (June 2004). A Low Temperature Wafer-Level Hermetic Package Using UV Curable Adhesive, The 54th Electronic Components and Technology Conference, Las Vegas, U.S.A..
[49] W.-C. Tai, C.-T. Wu, C.-P. Hsu, and W. Hsu (January 2004). Design and Fabrication of a Three-Dimensional Long-Stretch Micro Drive by Electroplating, The 17th IEEE International Conference on Micro Electro Mechanical Systems, Maastrict, Netherlands.
[49] W.-C. Tai, C.-T. Wu, C.-P. Hsu, and W. Hsu (January 2004). Design and Fabrication of a Three-Dimensional Long-Stretch Micro Drive by Electroplating, The 17th IEEE International Conference on Micro Electro Mechanical Systems, Maastrict, Netherlands.
[48] R. Y. Yu, Y. C. Lo, D. S. Huag, D.S., C. Wang, and W. Hsu (December 2003). 3D RF MEMS Lowpass Filter With Coplanar Interdigital And Meander Slow-wave Structures, 2003 材料年會, Taipei, Taiwan.
[48] R. Y. Yu, Y. C. Lo, D. S. Huag, D.S., C. Wang, and W. Hsu (December 2003). 3D RF MEMS Lowpass Filter With Coplanar Interdigital And Meander Slow-wave Structures, 2003 材料年會, Taipei, Taiwan.
[47] D.-S. Hung, Y.-C. Lo, R.-Y. Yu, C. Wang, and W. Hsu (November 2003). 3D MEMS S-band Resonators in Chip Size, 奈米工程暨微系統技術研討會, Taipei, Taiwan.
[47] D.-S. Hung, Y.-C. Lo, R.-Y. Yu, C. Wang, and W. Hsu (November 2003). 3D MEMS S-band Resonators in Chip Size, 奈米工程暨微系統技術研討會, Taipei, Taiwan.
[46] C. P. Hsu, T. Liao, and W. Hsu (June 2003). Electrothermally-driven long stretch micro drive with monolithic cascaded actuation units in compact arrangement, The 12th International Conference on Solid-State Sensors, Actuators and Microsystems, Boston, USA.
[46] C. P. Hsu, T. Liao, and W. Hsu (June 2003). Electrothermally-driven long stretch micro drive with monolithic cascaded actuation units in compact arrangement, The 12th International Conference on Solid-State Sensors, Actuators and Microsystems, Boston, USA.
[45] Y. Chiu, M. Y. Wu, H. P. Shieh, Y. T. Sun, H. L. Chou, and W. Hsu (May 2003). Integrated near-field optical head for hybrid recording, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[45] Y. Chiu, M. Y. Wu, H. P. Shieh, Y. T. Sun, H. L. Chou, and W. Hsu (May 2003). Integrated near-field optical head for hybrid recording, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[44] C. T. Wu, W. C. Tai, C. P. Hsu, and W. Hsu (May 2003). Design and Fabrication of a Three-Dimensional Long-Stretch Micro Drive by Electroplating, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[44] C. T. Wu, W. C. Tai, C. P. Hsu, and W. Hsu (May 2003). Design and Fabrication of a Three-Dimensional Long-Stretch Micro Drive by Electroplating, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[43] C. S. Lin, S. Y. Wen, and W. Hsu (May 2003).Enhancement on optical attenuation by non-smooth tunable mirror curvatures, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[43] C. S. Lin, S. Y. Wen, and W. Hsu (May 2003).Enhancement on optical attenuation by non-smooth tunable mirror curvatures, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[42] C. C. Lee and W. Hsu (May 2003). Modification on surface roughness by combining dry and wet etching, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[42] C. C. Lee and W. Hsu (May 2003). Modification on surface roughness by combining dry and wet etching, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[41] C. H. Ho and W. Hsu (May 2003). Characterization of embedded root method in UV-LIGA process, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[41] C. H. Ho and W. Hsu (May 2003). Characterization of embedded root method in UV-LIGA process, SPIE International Symposium on Microtechnologies for the New Millennium 2003, Gran Canaria, Spain.
[40] M. Y. Wu, Y. Chiu, H. P. Shieh, W. Hsu, and H. L. Chou (December 2002). Fabrication of planar integrated optical pick-up heads, 2002台灣光電科技研討會, Taipei, Taiwan.
[40] M. Y. Wu, Y. Chiu, H. P. Shieh, W. Hsu, and H. L. Chou (December 2002). Fabrication of planar integrated optical pick-up heads, 2002台灣光電科技研討會, Taipei, Taiwan.
[39] C. S. Lin, S. Y. Wen, and W. Hsu (November 2002). A Variable Optical Attenuator with Tunable Mirror Curvature, ASME International Mechanical Engineering Congress and Exposition, New Orleans, U.S.A..
[39] C. S. Lin, S. Y. Wen, and W. Hsu (November 2002). A Variable Optical Attenuator with Tunable Mirror Curvature, ASME International Mechanical Engineering Congress and Exposition, New Orleans, U.S.A..
[38] S. Chen and W. Hsu (November 2002). Reversible Stepwise Motion by a Novel Symmetric Scratch Drive Actuator, ASME International Mechanical Engineering Congress and Exposition, New Orleans, U.S.A..
[38] S. Chen and W. Hsu (November 2002). Reversible Stepwise Motion by a Novel Symmetric Scratch Drive Actuator, ASME International Mechanical Engineering Congress and Exposition, New Orleans, U.S.A..
[37] C. C. Lee and W. Hsu (November 2002). A New Surface Modification Method to Alleviate Stiction of Microstructures, ASME International Mechanical Engineering Congress and Exposition New Orleans, U.S.A..
[37] C. C. Lee and W. Hsu (November 2002). A New Surface Modification Method to Alleviate Stiction of Microstructures, ASME International Mechanical Engineering Congress and Exposition New Orleans, U.S.A..
[36] C. P. Hsu, W. S. Tai, and W. Hsu (November 2002). Design and Analysis of an Electro-thermally driven Long-stretch Micro Drive with Cascaded Structure, ASME International Mechanical Engineering Congress and Exposition, New Orleans, U.S.A..
[36] C. P. Hsu, W. S. Tai, and W. Hsu (November 2002). Design and Analysis of an Electro-thermally driven Long-stretch Micro Drive with Cascaded Structure, ASME International Mechanical Engineering Congress and Exposition, New Orleans, U.S.A..
[35] E. V. Bordatchev, S. K. Nikumb, and W. Hsu (September 2002). Fabrication of Long-Stretch Micro Drive for MEMS applications by ultra precision laser micromachining, 2002 NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing, London, Canada.
[35] E. V. Bordatchev, S. K. Nikumb, and W. Hsu (September 2002). Fabrication of Long-Stretch Micro Drive for MEMS applications by ultra precision laser micromachining, 2002 NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing, London, Canada.
[34] W. Hsu (September 2002). From Silicon-based to Metal-based Micromachining - Using Micro Actuators as examples, 2002 NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing, London, Canada. (invited)
[34] W. Hsu (September 2002). From Silicon-based to Metal-based Micromachining - Using Micro Actuators as examples, 2002 NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing, London, Canada. (invited)
[33] J. Chung and W. Hsu (August 2002). Sacrificial Layer Process for the Suspended Metal Structures in electrostatic Switch Application, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan.
[33] J. Chung and W. Hsu (August 2002). Sacrificial Layer Process for the Suspended Metal Structures in electrostatic Switch Application, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan.
[32] J. Chung and W. Hsu (August 2002). Micromachined I-Shape Cantilever Beam, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-yi, Taiwan.
[32] J. Chung and W. Hsu (August 2002). Micromachined I-Shape Cantilever Beam, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-yi, Taiwan.
[31] C. T. Wu, and W. Hsu (August 2002). Design and Fabrication of a Microactuator with Multi-Dimensional Motion, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-yi, Taiwan.
[31] C. T. Wu, and W. Hsu (August 2002). Design and Fabrication of a Microactuator with Multi-Dimensional Motion, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-yi, Taiwan.
[30] W. Hsu, (August 2002). Development of a Microfabrication Laboratory Course for Undergraduate Students, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-yi, Taiwan.
[30] W. Hsu, (August 2002). Development of a Microfabrication Laboratory Course for Undergraduate Students, IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-yi, Taiwan.
[29] H. Yang and W. Hsu (July 2002). Feasibility Study of Microfluidic Handling by Polar Capillary Effect, Pacific Rim Workshop on Transducers and Micro/Nano Technologies, Xiamen, China.
[29] H. Yang and W. Hsu (July 2002). Feasibility Study of Microfluidic Handling by Polar Capillary Effect, Pacific Rim Workshop on Transducers and Micro/Nano Technologies, Xiamen, China.
[28] H. C. Liu, Y. H. Lin, C. S. Chou, Y. Y. Hsu, and W. Hsu (December 2001). Sidewall roughness control in advanced silicon etch process,
SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
[27] C. T. Wu and W. Hsu (December 2001). Design and fabrication of a movable O-shape microclamper,SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
[27] C. T. Wu and W. Hsu (December 2001). Design and fabrication of a movable O-shape microclamper,SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
[26] C. H. Lin, Y. C. Lo, and W. Hsu (December 2001). Micro-fabrication of hemispherical poly-silicon shells standing on hemispherical cavities, SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
[26] C. H. Lin, Y. C. Lo, and W. Hsu (December 2001). Micro-fabrication of hemispherical poly-silicon shells standing on hemispherical cavities, SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
[25] C. P. Hsu and W. Hsu (December 2001). Influence of initial curvature and heating ratio on micromachined thermal biomorph actuation, SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
[25] C. P. Hsu and W. Hsu (December 2001). Influence of initial curvature and heating ratio on micromachined thermal biomorph actuation, SPIE's International Symposium on Microelectronics and MEMS, Adelaide, Australia.
[24] T. Lane and W. Hsu (October 2001). Fabrication of Sub-micron Optical Apertures by an Over-electroplating Method, International Symposium on Optical Memory, Taipei, Taiwan.
[24] T. Lane and W. Hsu (October 2001). Fabrication of Sub-micron Optical Apertures by an Over-electroplating Method, International Symposium on Optical Memory, Taipei, Taiwan.
[23] C. C. Lee and W. Hsu (March 2001). Optimization of an Electro-thermally and Laterally Driven Microactuator, Micro System Technologies, Dusseldorf, Germany.
[23] C. C. Lee and W. Hsu (March 2001). Optimization of an Electro-thermally and Laterally Driven Microactuator, Micro System Technologies, Dusseldorf, Germany.
[22] C. T. Wu and W. Hsu (March 2001). An Electro-thermally Driven Microactuator with Two Dimensional Motion, Micro System Technologies, Dusseldorf, Germany.
[22] C. T. Wu and W. Hsu (March 2001). An Electro-thermally Driven Microactuator with Two Dimensional Motion, Micro System Technologies, Dusseldorf, Germany.
[21] W. Hsu (Decmber 2000). MEMS/MOEM at National Chiao Tung University, International Workshop on MEMS and MOEM, Academia Sinica, Taipei, Taiwan. (Invited)
[21] W. Hsu (Decmber 2000). MEMS/MOEM at National Chiao Tung University, International Workshop on MEMS and MOEM, Academia Sinica, Taipei, Taiwan. (Invited)
[20] C. P. Hsu and W. Hsu (November 1999). The Electro-Thermally Driven Micro Membrane Actuators with Two-way Deflection, ASME IMECE'99, Nashville, U.S.A..
[19] Z. P. Xu and W. Hsu (December 1998). An Electro-Thermally Driven Micro Membrane Actuator with Two-way Deflection, Micro System Technologies 98, Potsdam, Germany.
[19] Z. P. Xu and W. Hsu (December 1998). An Electro-Thermally Driven Micro Membrane Actuator with Two-way Deflection, Micro System Technologies 98, Potsdam, Germany.
[18] M. H. Wu and W. Hsu (August 1998). Investigation of Torsion Springs by Considering the Friction and the End Effect, The 2nd International Conference on Engineering Design and Automation, Hawaii, U.S.A..
[18] M. H. Wu and W. Hsu (August 1998). Investigation of Torsion Springs by Considering the Friction and the End Effect, The 2nd International Conference on Engineering Design and Automation, Hawaii, U.S.A..
[17] 潘吉祥, 徐文祥 (1997). Silicon-Made Electro-Thermally and Laterally Driven Microactuators with Two-Way Deflection, 第十四屆機械工程學術研討會, 中壢中央大學。
[17] 潘吉祥, 徐文祥 (1997). Silicon-Made Electro-Thermally and Laterally Driven Microactuators with Two-Way Deflection, 第十四屆機械工程學術研討會, 中壢中央大學。
[16] 羅一中, 曹俊杰, 徐文祥 (1997). 微腔壁設計與製程, 第十四屆機械工程學術研討會, 中壢中央大學.
[16] 羅一中, 曹俊杰, 徐文祥 (1997). 微腔壁設計與製程, 第十四屆機械工程學術研討會, 中壢中央大學.
[15] 潘吉祥, 徐文祥 (1997). 量測薄模殘留應力的嶄新應變感測器, 第一屆微系統技術研討會, 新竹國科會精密儀器發展中心.
[15] 潘吉祥, 徐文祥 (1997). 量測薄模殘留應力的嶄新應變感測器, 第一屆微系統技術研討會, 新竹國科會精密儀器發展中心.
[14] 鄭博倫, 徐文祥 (1997). Design and Fabrication of a Strain-type Atomic Force Microscopy, 次世代製造技術研討會, 新竹工研院機械所.
[13] C. S. Pan and W. Hsu (1997). A Microstructure for the in situ Determination of Residual Strain, ASME International Mechanical Engineering Congress and Exposition, Dallas, Texas, U.S.A..
[13] C. S. Pan and W. Hsu (1997). A Microstructure for the in situ Determination of Residual Strain, ASME International Mechanical Engineering Congress and Exposition, Dallas, Texas, U.S.A..
[12] C. C. Tsao and W. Hsu (1997). Micro Membrane Vibrator with Thermally Driven Bimorph Cantilever Beams, Proceedings of SPIE, 3241, 195-205.
[12] C. C. Tsao and W. Hsu (1997). Micro Membrane Vibrator with Thermally Driven Bimorph Cantilever Beams, Proceedings of SPIE, 3241, 195-205.
[11] P. Wu and W. Hsu (1997). Investigation of The Four-Bar Linkage in A Spatial Rear Derailleur System, The 7th IFToMM International Symposium on Linkage and Computer Aided Design Methods, Romania.
[11] P. Wu and W. Hsu (1997). Investigation of The Four-Bar Linkage in A Spatial Rear Derailleur System, The 7th IFToMM International Symposium on Linkage and Computer Aided Design Methods, Romania.
[10] M. H. Wu, J. Y. Ho, and W. Hsu (1996). General Equations of a Helical Spring With a Cup Damper and Static Verification, 1996 ASME Design Engineering Technical Conferences, Irvine, U.S.A..
[10] M. H. Wu, J. Y. Ho, and W. Hsu (1996). General Equations of a Helical Spring With a Cup Damper and Static Verification, 1996 ASME Design Engineering Technical Conferences, Irvine, U.S.A..
[9] 林育生, 徐文祥 (1996). Thermally Actuated Bimorph Microactuators, CSME, 第十三屆機械工程學術研討會, 台北台灣大學。
[9] 林育生, 徐文祥 (1996). Thermally Actuated Bimorph Microactuators, CSME, 第十三屆機械工程學術研討會, 台北台灣大學。
[8] C. S. Pan, and W. Hsu (1996). An electro-thermally and laterally driven polysilicon microactuator, Fourth International Conference on Control, Automation, Robotics, and Vision, Singapore.
[8] C. S. Pan, and W. Hsu (1996). An electro-thermally and laterally driven polysilicon microactuator, Fourth International Conference on Control, Automation, Robotics, and Vision, Singapore.
[7] M. F. Wu, and W. Hsu (1996). Thermally Driven Polysilicon Actuators for Lateral Displacement, Fourth International Conference on Control, Automation, Robotics, and Vision, Singapore.
[7] M. F. Wu, and W. Hsu (1996). Thermally Driven Polysilicon Actuators for Lateral Displacement, Fourth International Conference on Control, Automation, Robotics, and Vision, Singapore.
[6] J. J. Liou, G. Huang, and W. Hsu (1996). Experimental Study of A Variable Pressure Damper on Automotive Valve Motion, Proceeding of 1996 ASME Design Engineering Technical Conferences, Irvine, U.S.A..
[6] J. J. Liou, G. Huang, and W. Hsu (1996). Experimental Study of A Variable Pressure Damper on Automotive Valve Motion, Proceeding of 1996 ASME Design Engineering Technical Conferences, Irvine, U.S.A..
[5] C. S. Pan and W. Hsu (1995). Modeling of a Honeycomb Compliant Micro-mechanism, IFToMM Ninth World Congress on Theory of Machines and Mechanisms, Italy.
[5] C. S. Pan and W. Hsu (1995). Modeling of a Honeycomb Compliant Micro-mechanism, IFToMM Ninth World Congress on Theory of Machines and Mechanisms, Italy.
[4] 陳士原, 徐文祥 (1994). 油壓式挺桿數學模式建立-電腦模擬與實驗驗證, 第十一屆機械工程學術研討會, 台中中興大學。
[4] 陳士原, 徐文祥 (1994). 油壓式挺桿數學模式建立-電腦模擬與實驗驗證, 第十一屆機械工程學術研討會, 台中中興大學。
[3] W. Hsu and A. P. Pisano (1993). Modeling of A Finger-Follower Cam System with Verification in Contact Forces, the 14th Biennial ASME Conference on Mechanical Vibration and Noise, Albuquerque, U.S.A..
[3] W. Hsu and A. P. Pisano (1993). Modeling of A Finger-Follower Cam System with Verification in Contact Forces, the 14th Biennial ASME Conference on Mechanical Vibration and Noise, Albuquerque, U.S.A..
[2] W. Hsu and A. P. Pisano (1990). Simulation and Experimental Investigation of an Automotive Finger-Follower Valve Train, ASME Winter Annual
[2] W. Hsu and A. P. Pisano (1990). Simulation and Experimental Investigation of an Automotive Finger-Follower Valve Train, ASME Winter Annual
Meeting, Dallas, Texas, U.S.A..
Meeting, Dallas, Texas, U.S.A..
[1] W. Hsu, W. and I.-H. Yang, (1986). Generic Bending, Buckling, and Vibration Curves for Anti-Symmetric Angle-Ply Laminated Plates, 第三屆機械工程研討會, 中壢中央大學。
[1] W. Hsu, W. and I.-H. Yang, (1986). Generic Bending, Buckling, and Vibration Curves for Anti-Symmetric Angle-Ply Laminated Plates, 第三屆機械工程研討會, 中壢中央大學。
Patents
Patents
[21] 徐文祥, 黃正鄴, 蔡泊諺, 施博懷, 范士岡, 饒達仁, 劉承賢, 黃泓淵, 磁珠式數位微流體免疫分析裝置與其方法 MAGNETIC BEAD-BASED DIGITAL MICROFLUIDIC IMMUNOANALYSIS DEVICE AND METHOD THEREOF, 中華民國專利證號: 發明 I542879, 民國105年7月21日.
[21] 徐文祥, 黃正鄴, 蔡泊諺, 施博懷, 范士岡, 饒達仁, 劉承賢, 黃泓淵, 磁珠式數位微流體免疫分析裝置與其方法 MAGNETIC BEAD-BASED DIGITAL MICROFLUIDIC IMMUNOANALYSIS DEVICE AND METHOD THEREOF, 中華民國專利證號: 發明 I542879, 民國105年7月21日.
[20] 李孟學, 吳松岳, 徐文祥, 王子康, 鍾添淦, 吳嘉珮, 骨髓內釘固定孔定位系統 LOCATING SYSTEM FOR LOCKING HOLE OF INTRAMEDULLARY NAIL,中華民國專利證號: 發明 I538654, 民國105年6月21日.
[20] 李孟學, 吳松岳, 徐文祥, 王子康, 鍾添淦, 吳嘉珮, 骨髓內釘固定孔定位系統 LOCATING SYSTEM FOR LOCKING HOLE OF INTRAMEDULLARY NAIL,中華民國專利證號: 發明 I538654, 民國105年6月21日.
[19] 孟心飛, 徐文祥, 冉曉雯, 林郁馨, 蔡娟娟, 徐振航, 莊凱丞, 顯示面板及其製造方法 DISPLAY PANEL AND MANUFACTURING METHOD THEROF, 中華民國專利證號: 發明 I527208, 民國105年3月21日.
[19] 孟心飛, 徐文祥, 冉曉雯, 林郁馨, 蔡娟娟, 徐振航, 莊凱丞, 顯示面板及其製造方法 DISPLAY PANEL AND MANUFACTURING METHOD THEROF, 中華民國專利證號: 發明 I527208, 民國105年3月21日.
[18] 岳庭如, 陳紀帆, 張國威, 張佩喻, 劉承賢, 黃泓淵, 李金蓉, 田昌弘, 饒達仁, 范士岡, 徐文祥. 體外細胞自動抓取共養平台系統 IN VITRO CELL AUTOMATIC POSITIONING CO-CULTIVATION PLATFORM SYSTEMS, 中華民國專利證號: 發明 I509,067, 民國104年11月21日.
[18] 岳庭如, 陳紀帆, 張國威, 張佩喻, 劉承賢, 黃泓淵, 李金蓉, 田昌弘, 饒達仁, 范士岡, 徐文祥. 體外細胞自動抓取共養平台系統 IN VITRO CELL AUTOMATIC POSITIONING CO-CULTIVATION PLATFORM SYSTEMS, 中華民國專利證號: 發明 I509,067, 民國104年11月21日.
[17] 徐文祥, 李岳剛, 蔣鎧宇, 苗延武. 微機電感測裝置與其製造方法 MEMS SENSING DEVICE AND MANUFACTURING METHOD THEREOF, 中華民國專利證號: 發明 I461,693, 民國103年11月21日.
[17] 徐文祥, 李岳剛, 蔣鎧宇, 苗延武. 微機電感測裝置與其製造方法 MEMS SENSING DEVICE AND MANUFACTURING METHOD THEREOF, 中華民國專利證號: 發明 I461,693, 民國103年11月21日.
[16] 徐文祥, 潘政宏. 打結裝置及打結方法 KNOT-TYING DEVICE AND KNOT-TYING METHOD, 中華民國專利證號: 發明 I458,459, 民國103年11月1日.
[16] 徐文祥, 潘政宏. 打結裝置及打結方法 KNOT-TYING DEVICE AND KNOT-TYING METHOD, 中華民國專利證號: 發明 I458,459, 民國103年11月1日.
[15] 吳松岳, 徐文祥. 應變感測裝置 STRAIN SENSOR DEVICE, 中華民國專利證號: 發明 I414,762, 民國102年11月11日.
[15] 吳松岳, 徐文祥. 應變感測裝置 STRAIN SENSOR DEVICE, 中華民國專利證號: 發明 I414,762, 民國102年11月11日.
[14] W. Hsu, T.-C. Huang, and H.-Y. Lin. "Method of forming a cavity by two-step etching and method of reducing dimension of a MEMS device." U.S. Patent No. 7,514,287. 7 Apr. 2009.
[14] W. Hsu, T.-C. Huang, and H.-Y. Lin. "Method of forming a cavity by two-step etching and method of reducing dimension of a MEMS device." U.S. Patent No. 7,514,287. 7 Apr. 2009.
[13] W. Hsu, T.-C. Huang, and H.-Y. Lin. "Method of calibrating zero offset of a pressure sensor." U.S. Patent No. 7,392,687. 1 Jul. 2008.
[13] W. Hsu, T.-C. Huang, and H.-Y. Lin. "Method of calibrating zero offset of a pressure sensor." U.S. Patent No. 7,392,687. 1 Jul. 2008.
[12] 徐文祥, 孫翊庭. 超半球固態浸沒式透鏡之製法 PROCESS FOR FABRICATING SUPERSPHERE SOLID IMMERSION LENS, 中華民國專利證號: 發明 I290,266, 民國96年11月21日.
[12] 徐文祥, 孫翊庭. 超半球固態浸沒式透鏡之製法 PROCESS FOR FABRICATING SUPERSPHERE SOLID IMMERSION LENS, 中華民國專利證號: 發明 I290,266, 民國96年11月21日.
[11] 黃德昌, 林弘毅, 徐文祥. 利用二階段蝕刻方式製作腔體之方法與縮減微機電元件之尺寸的方法 METHOD OF FORMING A CAVITY BY TWO-STEP ETCHING AND METHOD OF REDUCING DIMENSION OF A MEMS DEVICE, 中華民國專利證號: 發明 I272,671, 民國96年2月1日.
[11] 黃德昌, 林弘毅, 徐文祥. 利用二階段蝕刻方式製作腔體之方法與縮減微機電元件之尺寸的方法 METHOD OF FORMING A CAVITY BY TWO-STEP ETCHING AND METHOD OF REDUCING DIMENSION OF A MEMS DEVICE, 中華民國專利證號: 發明 I272,671, 民國96年2月1日.
[10] 黃德昌, 林弘毅, 徐文祥. 校正壓力感測器之零點偏移電壓的方法 METHOD OF CALIBRATING ZERO OFFSET OF A PRESSURE SENSOR, 中華民國專利證號: 發明 I270,667, 民國96年1月11日.
[10] 黃德昌, 林弘毅, 徐文祥. 校正壓力感測器之零點偏移電壓的方法 METHOD OF CALIBRATING ZERO OFFSET OF A PRESSURE SENSOR, 中華民國專利證號: 發明 I270,667, 民國96年1月11日.
[9] 邱一, 徐文祥, 張育儒. 光學元件中微透鏡與微孔自我對準的製作方法, 中華民國專利證號: 發明 I263,816, 民國95年10月11日.
[9] 邱一, 徐文祥, 張育儒. 光學元件中微透鏡與微孔自我對準的製作方法, 中華民國專利證號: 發明 I263,816, 民國95年10月11日.
[8] 徐文祥,謝漢萍, 孫翊庭. 磁光式之近場光學光儲存元件, 中華民國專利證號: 發明 I260,583, 民國95年8月21日.
[8] 徐文祥,謝漢萍, 孫翊庭. 磁光式之近場光學光儲存元件, 中華民國專利證號: 發明 I260,583, 民國95年8月21日.
[7] W. Hsu and Y.-T. Sun. "Process for fabricating supersphere solid immersion lens." U.S. Patent No. 7,083,902. 1 Aug. 2006.
[7] W. Hsu and Y.-T. Sun. "Process for fabricating supersphere solid immersion lens." U.S. Patent No. 7,083,902. 1 Aug. 2006.
[6] W. Hsu, H.-P. Shieh, Y. T. Sun. "Microelectro mechanical system for magneto-optic data storage apparatus." U.S. Patent No. 7,002,226. 21 Feb. 2006.
[6] W. Hsu, H.-P. Shieh, Y. T. Sun. "Microelectro mechanical system for magneto-optic data storage apparatus." U.S. Patent No. 7,002,226. 21 Feb. 2006.
[5] 徐文祥, 周學良, 田仲豪. 結合固態浸沒式透鏡與奈米微孔之製造方法及其裝置, 中華民國專利證號: 發明 I236,010. 民國94年7月11日.
[5] 徐文祥, 周學良, 田仲豪. 結合固態浸沒式透鏡與奈米微孔之製造方法及其裝置, 中華民國專利證號: 發明 I236,010. 民國94年7月11日.
[4] 徐文祥, 鍾君煒, 廖挺欣. 以表面微加工技術製作垂直式梳狀致動器之方法, 中華民國專利證號: 發明 200,536. 民國93年3月21日.
[4] 徐文祥, 鍾君煒, 廖挺欣. 以表面微加工技術製作垂直式梳狀致動器之方法, 中華民國專利證號: 發明 200,536. 民國93年3月21日.
[3] 徐文祥 ;連金傳. 可調式側視型內視鏡, 中華民國專利證號: 新型 184,525. 民國90年11月11日.
[3] 徐文祥 ;連金傳. 可調式側視型內視鏡, 中華民國專利證號: 新型 184,525. 民國90年11月11日.
[2] R.-F. Chou, W. Hsu, S.-C. Lo, H.-F. Lin. "Manufacturing method for planar microprobe including electrostatic actuator using sacrificial layer technology." U.S. Patent No. 6,136,208. 24 Oct. 2000.
[2] R.-F. Chou, W. Hsu, S.-C. Lo, H.-F. Lin. "Manufacturing method for planar microprobe including electrostatic actuator using sacrificial layer technology." U.S. Patent No. 6,136,208. 24 Oct. 2000.
[1] 周柔甫, 徐文祥, 羅士哲, 林錫甫. 以犧牲層技術製作含靜電式微致動器之平面型細微探針及其製造方法, 中華民國專利證號: 發明 123,045. 民國89年10月11日.
[1] 周柔甫, 徐文祥, 羅士哲, 林錫甫. 以犧牲層技術製作含靜電式微致動器之平面型細微探針及其製造方法, 中華民國專利證號: 發明 123,045. 民國89年10月11日.
Technique Reports
Technique Reports
[10] 李孟學、徐文祥，「電感電容迴路式無線被動感測器」，機械新刊，第一卷，第一期，2016，pp 30-44。
[10] 李孟學、徐文祥，「電感電容迴路式無線被動感測器」，機械新刊，第一卷，第一期，2016，pp 30-44。
[9] 吳松岳，徐文祥，2013，從微機電系統到跨領域研究，電子月刊，1月號，58-71。
[9] 吳松岳，徐文祥，2013，從微機電系統到跨領域研究，電子月刊，1月號，58-71。
[8] 許鎮鵬，徐文祥，2001，微機電製程中的犧牲層技術之發展現況，半導體科技雜誌，十月號。
[8] 許鎮鵬，徐文祥，2001，微機電製程中的犧牲層技術之發展現況，半導體科技雜誌，十月號。
[7] 李政璋，徐文祥，2001，微型熱致動器與致動機構簡介，機構與機器原理學會會刊，第十二卷，第1期，8-18.
[7] 李政璋，徐文祥，2001，微型熱致動器與致動機構簡介，機構與機器原理學會會刊，第十二卷，第1期，8-18.
[6] 吳青台，徐文祥，2001，微接頭機構簡介，機構與機器原理學會會刊，第十二卷，第1期，1-7.
[6] 吳青台，徐文祥，2001，微接頭機構簡介，機構與機器原理學會會刊，第十二卷，第1期，1-7.
[5] 黃瑞星，方維倫，黃宇中，徐文祥，周正三，1999，國科會中區微機電系統研究中心簡介，科學發展月刊，第二十八卷，第十二期，933-939。
[5] 黃瑞星，方維倫，黃宇中，徐文祥，周正三，1999，國科會中區微機電系統研究中心簡介，科學發展月刊，第二十八卷，第十二期，933-939。
[4] 李政璋，徐文祥，林盈熙，1998，具感測器與致動器的掃描探針之設計與製作，機械工業雜誌, 185期, 110-117。
[4] 李政璋，徐文祥，林盈熙，1998，具感測器與致動器的掃描探針之設計與製作，機械工業雜誌, 185期, 110-117。
[3] 潘吉祥，徐文祥，1998，水平式微熱致動器，電子月刊，12月號，41期，46-53.
[3] 潘吉祥，徐文祥，1998，水平式微熱致動器，電子月刊，12月號，41期，46-53.
[2] 林育生, 周敏傑, 陳世洲, 徐文祥, 1997, 積體電路技術在矽基微機械加工之應用（三）-以兩個微致動器製程為例, 機械工業雜誌, 173期, 167-175。
[2] 林育生, 周敏傑, 陳世洲, 徐文祥, 1997, 積體電路技術在矽基微機械加工之應用（三）-以兩個微致動器製程為例, 機械工業雜誌, 173期, 167-175。
[1] 林盈熙, 鄭博倫, 徐文祥, 1997, 具應變計之原子力顯微鏡探針, 機械工業雜誌, 173期, 167-175。
[1] 林盈熙, 鄭博倫, 徐文祥, 1997, 具應變計之原子力顯微鏡探針, 機械工業雜誌, 173期, 167-175。