Olight M3X

投稿日: Mar 25, 2011 4:29:45 PM

Features:

• High-Performance, High-reliability Cree XLamp XM-L

• Max 700 lumens(OTF)

• Max 15 hours long runtime

• Anti battery polarity reverse protection

• Two digitally controlled constant brightness levels and strobe

• Access to strobe instantly

• Rugged indestructible aluminum body with anti-scratching type III hard anodization

• Engineered anti-slip knurling for a tightly firm grip

• Tactical forward switch for power on/off and easy momentary-on

• Dentate bezel head and tail provided for close quarter combat

• Multi-scattering slot design to protect LED and electronic components

• Intelligent temperature control system to prevent flashlights overheated

• Highly water resistant to IPX-8

• Smooth reflector offers perfect beam and long throw

• Anti-shattering ultra clear lens, anti-scratching and anti-slip

• Friendly user interface, rotate the head for transferring mode.

• Operated by 2x18650 with extra extended tube to prolong the runtime

• Removable stainless steel clip

• Mountable on weapons with compatible weapon mount

Specification:

Battery: 3xCR123A or 4xCR123A /2xLi-ion 18650 with extended tube

(Note: we don't suggest using RCR123A batteries since they

can not offer enough power under high level)

Dimensions: Dl63mm/2.48"(D) X211mm/8.31"(L) Body Diameter: 25mm/0.98"

Weight: 266g/9.38oz (exclude battery)

Functions: Two brightness levels and strobe mode

High 700 lm (1.2H) --- Low 60 lm (15H)--- Strobe 10Hz (2.4H)

Accessories: Include one battery magazine (required for 3pcs CR123A batteries),one holster, one extended tube,

one operator's manual, two O-rings

Optional Accessories:

Filter (Red, Green, Blue), White diffuser, Weapon Mount and Remote pressure switch

Operation:

Turn On/Off The Power

Pressing the tail cap switch will turn on/off the power

For momentary light, gently press (no click) the tailcap push button switch.

For constant light, fully press (click) the tailcap pushbutton switch.

Tighten light head to enter into high mode, loose it will change to low mode. Tighten-loose-tighten or loose-tighten-loose within 2 seconds will active strobe mode, tighten or loose the head will active illumination mode.

Lockout Mode: To lock out the switch, rotate the tailcap approximately 180°counter-clockwise. The lock out position

prevents accidental activation during storage or transport.

Warning: Please use high mode sparingly. Due to its high power consumption, an excessive amount of heat may

be built up and it may harm the batteries and the flashlight.