Embedded Files
投稿日: Aug 21, 2010 1:53:37 PM
Superseding the legendary EagleTac M2 series, the EagleTac M3C4 is a compact 11 Watt high
output LED flashlight offering 800 O.T.F. lumen at turbo mode (SST-50 and triple XP-G R5
models) and a maximum of 100+ hours regulated runtime at the 15 lumen low output mode.
Dial the operational switch behind the head to toggle the light on/off, adjust the brightness
output, and access the hidden strobe/fast beacon/SOS features.
EagleTac M3C4 offers four LED options:
Luminus SST-50 W65S WJ LED (maximum output, single LED)
Triple CREE XP-G Cool White R5 LED (maximum output, three individual LEDs)
Triple CREE XR-E Cool White R2 LED (maximum far projecting performance)
CREE MC-E M LED (high output and smooth beam. No dark center hole is detected under the
new ET55 reflector)
O.T.F. lumen output:
Luminus SST-50 W65S WJ LED: 16/56/172/376/800
Triple CREE XP-G Cool White R5 LED: 15/55/172/393/800
Triple CREE XR-E Cool White R2 LED: 16/60/165/320/600
CREE MC-E M LED: 16/52/148/312/625
Typical runtime:
1.5/3.5/8/28/100+ hours
*CREE triple XR-E R2 will have approximately 10% shorter runtime due to the higher LED
forward voltage.
LED driver:
New C2800 II circuit. Dial the operational ring to turn the flashlight on/off, adjust between the
five brightness levels, and access the three hidden modes (strobe, fast beacon, sos). To access
the hidden blinking modes, turn the ring from the turbo mode to the off/standby mode, then
back to the turbo mode.
New one-piece flashlight head design (from the top of the knurling area to the battery contact
point behind the head)
This allows optimal LED heatsink capability and operational reliability. The flashlight head is not
sealed and user can gain access to the inside of the lens and reflector.
New durable hard anodization coating
Available in HAIII finish in black and dark gray color (40 μm in thickness and 350-380 HV in
hardness). Black color will ship first, follow by the gray color.
New Reflector design in L.O.P. finish
The CREE MC-E and the Luminus SST-50 versions feature a newly revised ET55 reflector that
offers smooth and high output beam without artifacts or dark center spot in the beam. The
triple CREE XP-G and the triple XR-E use a new parabolic reflective curve for maximum far
projecting beam and high output brightness.
The tail-stand tail-cap receives a new durable protective coating. The package also come with
a para-cord lanyard with darken holding clip that fits in the tail-cap lanyard hole. The controller
ring also receives the new durable protective coating.
The Flashlight head and the body are o-rings and square-rings sealed for operating in harsh and
wet environments. Reverse battery polarity protection has been implemented on the battery
tray for each battery channel. The water-proof tail-cap now uses stainless steel 304 mounting
screws with hex heads.
Included accessories:
CNC machined 304 Stainless steel bezel
Included diffuser filter. YRGB filter kit (yellow for fog and rain) is optional.
Paracord lanyard with darken pocket clips and split ring
M series nylon holster
Additional accessories included in the kit version:
High output yellow optical grade lens filter
High output red lens filter
Mirror finish coated green filter
Mirror finish coated blue filter
four ET CR123A 1500mAh PTC protected batteries
Free M25 clicky kit included for pre-order
Side notes: Lumen output at LED
CREE MC-E M LED: 20/65/185/390/750 lumen at LED*
Luminus SST-50 W65S WJ LED: 20/70/215/470/1000 MAX lumen at the LED
Triple CREE XR-E Cool White R2 LED: 20/74/205/390/725 at the LED*
Triple CREE XP-G Cool White R5 LED: 18/70/215/475/1000 at the LED*
Page updated
Google Sites
Report abuse