EagleTac D25LC2 Clicky

投稿日: Apr 25, 2012 4:16:51 PM

• 光束

  • • CREE XM-L U2 CoolWhite Max741ルーメン

    • CREE XM-L NeutralWhite Max689ルーメン

    • CREE XP-G2 CoolWhite Max493ルーメン

Battery:

2xCR123A battery, 2xRCR123A or 1x18650 li-ion

Operating Voltage Range: 2.7V to 8.4V

Output:

XT-E R5

LED Lumen: 491/343/52/8

OTF Lumen: 344/239/37/5

Above output has moon-mode enabled, with moon mode is disabled:

- lowest output increases by about two times, to 18 lumen, and the second lowest output doubles, to about 100 lumen

Runtimes:

(Turbo/high/med/low)

(using 2xCR123A)

XT-E or XP-G: 1.5/2.5/18/100+ hours

(using 1x18650 3100mAh)

XT-E or XP-G: 1.8/3/33/150+ hours

Circuit

XT-E and XP-G uses C1500RC

Dimensions:

Length: 4.5 inch (11.5 cm)

Body Diameter: 0.85 inch (2.2 cm)

Head Diameter: 0.9 inch (2.25 cm)

Body Weight (excluding batteries): 1.7 ounces (49 grams)

Operations:

1) Press on the switch button until it clicks to turn on the flashlight. To switch off the light, press the switch again until it clicks.

2) Switching between group output: With the flashlight on, tight the head to access group 2 output. Loose the head to access group 1 output.

3) Switching between modes: With the flashlight on, slightly press the switch and release (within 1.5s) to switch to the next output.

Programmable Features

1) Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosen, turn on the light, and then repeat tight and loose for three times.

2) mode memory* - remembers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times. (* D25A2 clicky and C clicky only)