Tommy Hill Letter "A"

Day 1

I first started out finding a photo of something that I want to make. After that, I made the A in Inkscape and started to work out the dimensions.

Day 2

On the second day I finished getting the plans and printed them out. I then crafted them together using hot glue. Here is the rough draft

I noticed that I had a lot of dimensions that were wrong on my rough draft so I spent the rest of class fixing those so that the next day I could print my wooden copy.

Day 3

Today I printed out the wooden sides for the letter, They ended up being the right size except for 2 of them so I have to go back and change that. Next class I will print the other cardboard A with the slots that go below it.

Day 4

I did a lot of thinking this class mainly on the design on my A and what I was going to put on it. Luckily, I was at the front of the line so I was able to cut relatively quickly. But when I first looked and the slots they seemed a tiny but small so I quickly edited the file and waited until I would be able to print again.

Day 5

In this class I mainly worked on a computer thinking how I could be able to incorporate Hawken and the fab lab. I came up with this design: