Embedded Files
Get the Formative Assessment: FA10.1.docx
Get the practice problems: Worksheet-10.1-FluidStatics.docx
The Formative Assessment Solved:
(1 atm = 1.013x105 Pa = 101.3 kPa = 14.7 psi = 760 Torr; 1 m3 = 1000 liters; pabsolute = pgauge + 1 atm; )
The SA 10.1:
The SA 10.1:
1. A circular porthole in an airplane has a diameter of 37.0 cm. If there is a pressure difference of 31,510 Pa from one side of the window to the other, what is the net force pushing out on the porthole?
(3390 N)
2. A cannon ball has a density of 7820 kgm-3 and a mass of 23.2 kg. What is its radius if it is perfectly spherical?
(8.91 cm)
More like this:
3. A hydraulic jack has an input piston diameter of 0.850 cm, and an output piston diameter of 4.50 cm. What force must you exert on the input piston to lift a 1210 kg car?
(424 N )
More like this:
4. An empty beaker 8.20 cm in diameter is pushed 10.3 cm into mercury (ρ = 13.6x103 kg m-3). What is the net upward force on the bottom of the beaker? (Assume the pressure above the mercury is 1 atm)
(72.6 N)
4b. What is the gauge pressure in PSI at a depth of 8.50 m in fresh water? (ρ = 1000. kg m-3)
(12.1 PSI)
4c. At what depth in ocean water (ρ = 1025 kgm-3) is the absolute pressure 8320 Torr?
(100. m)
5. A cylinder has a radius of 0.920 cm and is 25.0 cm long. How far will it sink into a mixture with a density of 865 kg m-3 if it has a mass of 37.5 grams assuming it is weighted so it floats vertically?
(16.3 cm )
5b. What upward force would you need to exert on a 11.5 kg piece of Murralite (ρ = 1666 kgm-3) submerged in the dead sea where the water has a density of 1240 kgm-3 to keep it from sinking?
(28.8 N)
5c. A hot air balloon is 9.00 m in radius (assume it is spherical) and contains hot air with a mean density of 0.950 kgm-3. Calculate the lifting capacity (in N) of the hot air if it is surrounded by air with a density of 1.31 kgm-3
(10,784 N)
The Worksheet 10.1
The Worksheet 10.1
More Practice Problems:
Worksheet 10.1: Fluid Mechanics - Statics (Links at end are video solutions)
Pressure: P = F/A (memorize area of circle, and rectangle)
1. A force of 23,450 N is exerted on a rectangular window that measures 2.30 m by 0.980 m. What is the pressure? (1.04E4 Pa) <Video>
2. What is the force of 2100. psi over a circular flange with a radius of 8.5 inches? (476658 lbs ≈ 4.8E5 lbs) <Video>
3. What is the total area in m2 of some snowshoes, if a 75 kg person does not exert a pressure greater than 1.2 x 103 Pa? (0.61 m2) <Video>
Pressure conversions
Converting units of pressure.
1.00 atm = 1.013x105 Pa = 101.3 kPa = 760. Torr = 14.7 psi
Gauge and absolute pressure: P = PG + 1 atm
10. What is 0.45 atm gauge in absolute? (1.45 atm) <Video>
11. What is 34.0 psi gauge in absolute? (48.7 psi) <Video>
12. What is 4.50 psi absolute in gauge? (-10.2 psi) <Video>
13. What is 3.415 x 105 Pa in absolute in gauge? (2.402E5 Pa) <Video>
14. What is 3.60 atm absolute in gauge? (2.60 atm) <Video>
15. What is 45.0 psi absolute in gauge (30.3 psi) <Video>
16. What is 34,500 Pa gauge in absolute? (1.358E5 Pa) <Video>
Gauge and unit conversions (on the assessments)
17. What is 12.0 psi gauge in Pa absolute? (1.84E5 Pa) Video Solution: HTPIB10S#UC1a <Video>
22. What is 34,500 Pa absolute in atm gauge? (-0.659 atm) Video Solution: HTPIB10S#UC1b <Video>
18. What is 78.0 kPa absolute in Torr gauge? (-175 Torr) <Video>
23. What is 1.30 atm gauge in kPa absolute? (233 kPa) <Video>
19. What is 34.5 psi gauge in atm absolute? (3.35 atm) <Video>
24. What is 7810 Pa absolute in kPa gauge? (-93.5 kPa) <Video>
20. What is 0.835 atm absolute in Torr gauge? (-125 Torr) <Video>
25. What is -34.9 kPa gauge in psi absolute? (9.64 psi) <Video>
21. What is 8.45 psi gauge in kPa absolute? (160. kPa) <Video>
26. What is 512,000 Pa absolute in Torr gauge? (3081 Torr) <Video>
Density ρ = m/V (memorize volume of sphere, rectangular solids, cylinder)
27. What is the density (in kg m-3) of a cube that is 11.0 cm on a side, and has a mass of 894 grams? (672 kgm-3) <Video>
28. What is the mass of a gold brick that measures 26.0 cm x 8.00 cm x 12.0 cm? (ρ = 19.3x103 kgm-3) (48.2 kg) <Video>
29. A sphere that contained 45.0 kg of air would have what radius? (ρ = 1.29 kgm-3) (2.03 m) <Video>
30. What is the density of a shot put that has a diameter of 12.0 cm and a mass of 7.26 kg? (8020 kgm-3) <Video>
31. What is the mass of mercury (ρ = 13.6x103 kgm-3) in a (cylindrical) cup that is 9.00 cm tall, and 11.0 cm in diameter? (11.6 kg) Video Solution: HTPIB10S#8 <Video>
Pascal's Principle: F/A = F/A (memorize area of circle)
32. An engineer designs a hydraulic jack to lift 4560 kg. If the output cylinder is 8.20 cm in diameter, and the input cylinder is 0.420 cm in diameter, what input force is required? (117 N) <Video>
33. A hydraulic jack lifts 620. kg of mass with an input force of 24.0 N. What is the diameter of the input cylinder if the output cylinder has a diameter of 12.6 cm? (0.791 cm) <Video>
34. If you exert 4.45 N on the 0.920 cm diameter input cylinder of a hydraulic jack, what force does the 6.80 cm diameter output cylinder exert? (243 N) <Video>
35. A brake cylinder exerts 342 N of force with an input force of 55.2 N. What is the diameter of the brake cylinder if the master cylinder has a diameter of 1.21 cm? (3.01 cm) Video Solution: HTPIB10S#12 <Video>
36. A brake cylinder exerts 416 N of force on the rotor. What is the input force if the master cylinder has a radius of 2.30 cm, and the brake cylinder is 4.50 cm in diameter? (109 N) <Video where 2.30 cm is radius> <Video where 2.30 cm is the diameter>
Hydrostatic Pressure: P = Po + ρgd
Simple:
37. What is the pressure at a depth of 125 m in the ocean? (ρ = 1025 kgm-3) Assume there is 1 atm above the water. (1.36x106 Pa) <Video>
38. What is the gauge pressure at a depth of 1.67 m in mercury? (ρ = 13.6x103 kgm-3) Assume there is 1 atm above the surface. (2.23x105 Pa) <Video>
39. At what depth in fresh water (ρ = 1000. kgm-3) is the absolute pressure 2.31x106 Pa. Assume there is 1 atm above the water. (225 m) <Video>
More Complex: (These are like the assessment questions. Use Pa, and P = F/A)
40. At what depth below the ocean (ρ = 1025 kgm-3) is the absolute pressure 100. psi? (Assume the pressure above the surface is 1 atm) (58.5 m) <Video>
41. A submarine is 45.2 m below the surface of a lake (ρ = 1000. kgm-3). What is the net force exerted on a 85.0 cm diameter hatch. Assume there is 1 atm above the water, and in the submarine? (2.52x105 N) <Video>
42. There is a gauge pressure of 812 Torr at a depth of 14.2 m in a fluid. What is the density of the fluid? Assume there is 1 atm above the fluid. (777 kgm-3) Video Solution: HTPIB10S#19 <Video>
43. At what depth in the dead sea (ρ = 1240 kgm-3) does the water exert a force of 23,500 N on a 9.20 cm diameter porthole? Assume there is 1 atm above the water. (282 m) Video Solution: HTPIB10S20 <Video>
44. A tank contains Liquid nitrogen (ρ = 808 kgm-3). At a depth of 13.5 m there is an absolute pressure of 313.7 kPa. What is the pressure at the top of the liquid in psi? (30.0 psi) Video Solution: HTPIB10S21 <Video>
Buoyancy (B = ρfVfg)
Simple: (I walk you through all the steps with separate questions)
45. What is the buoyant force on a block of wood that is 2.95 cm x 4.50 cm x 4.50 cm submerged in fresh water? (ρ = 1000. kgm-3) If the wood has a density of 362 kgm-3, what is its mass? What is its weight? What downward force would you need to exert to hold it under the water? (0.586 N, 0.0216 kg, 0.212 N, 0.374 N) <Video>
46. A 0.120 kg aluminium (ρ = 2680 kgm-3) mass is submerged in alcohol with a density of 789 kgm-3. What is the volume of the aluminium mass? What is the buoyant force acting on the mass? What is the weight of the mass? If the mass is resting on the bottom of the beaker, what is the normal force the beaker exerts on the mass? What is the apparent "mass" of the aluminium? (The mass that would weigh what the normal force is...) (4.48E-5 m3, 0.347 N, 1.18 N, 0.831 N, 0.0847 kg) <Video>
47. A rectangular block of wood has a density of 345 kgm-3 and measures 85.2 cm x 64.2 cm x 20.0 cm. It floats in water (ρ = 1000. kgm-3) with a large face down in the water. What is its mass? What volume of water must it displace to float? (What is the volume of water that has this mass?) How far up the 20.0 cm side does the water come so that the block displaces this volume of water? (85.2 cm x 64.2 cm x X = volume) How much of the 20.0 cm dimension sticks up above the water? (37.7 kg, 0.0377 m3, 0.069 m or 6.90 cm, or 13.1 above) <Video>
More Complex - I just ask you the last part.
48. What downward force would you need to exert to keep a 14.0 cm radius sphere with a density of 253 kgm-3 submerged in a fluid with a density of 965 kgm-3? (80.3 N) Video Solution: HTPIB10S25 Hack <Video>
49. What upward force would you need to exert on a 52.1 kg piece of basalt (2920 kgm-3) submerged in the dead sea where the water has a density of 1240 kgm-3 to keep it from sinking? (294 N) Video <Video>
50. A 13.25 gram hydrometer is a 1.12 cm diameter tube weighted on one end so it floats upright in a liquid. If it is 25.0 cm long, but floats with 7.80 cm exposed to air, what is the density of the liquid? (782 kgm-3) Video Solution: HTPIB10S27 Hack <Video>
51. A hot air balloon is 8.74 m in radius (assume it is spherical) and contains hot air with a mean density of 0.9486 kgm-3. Calculate the lifting capacity of the hot air if it is surrounded by air with a density of 1.34 kgm-3. (10,740 N) Video <Video>
52. A glass (2580 kgm-3) cylindrical stirring rod is 5.02 mm in diameter and 18.0 cm long. What force do I need to exert on it to hold it vertically at rest with the tip submerged in acetone (791 kgm-3) to a depth of 11.0 cm? (7.33x10-2 N) Video Solution: HTPIB10S29 <Video>
53. A rectangular piece of wood that measures 13.0 cm x 15.2 cm x 3.78 cm floats face down in a fluid with a density of 893 kgm-3 with 2.93 cm of the 3.78 cm dimension submerged. What is the density of the wood? (692 kgm-3) Video Solution: HTPIB10S#30 <Video>
54. A 5.34 kg piece of rock can be supported by a force of 40.4 N when submerged in water with a density of 1008 kgm-3. What is the density of the rock? (4406 kgm-3) Video Solution: HTPIB10S31 Hack <Video>
55. A 1.28 kg piece of Styrofoam float material can be held under water (ρ = 1000. kgm-3) with a downward force of 328.7 N. What is the density of the Styrofoam? (36.8 kgm-3) Video <Video>
Instruction for this unit:
Page updated
Report abuse