HP Printer Wi-Fi Setup

Complete the HP printer Wi-Fi setup is really a cakewalk for those who have a prior understanding of the whole procedure. However, if you do not have an idea about the process, then it could be a little complicated. But worry not! Here, learn about the two proven methods to set up the machine without facing any issues. 

Solution 1: Via Wireless Setup Wizard

Scroll down the top bar of the printer control panel and then tap on the Settings icon. 

Then you need to select the tap on Network Setup. 

Next, go to the Wireless Settings option. 

After that, choose the Wireless Setup wizard. 

When it searches for the network, select your Wireless network from the list.

Enter your wireless connection password, click OK, and wait for the connection to complete.

At last a test document will be printed to see if the HP printer wireless setup is successful.

Solution 2: Via WPS Push Button

Firstly, ensure that your printer supports the WPS push button mode. (Note- If your printer does not have the WPS push button, you can do it from the printer control panel with menus.) 

Now, confirm that your Wi-Fi router has a WPS button.

When your HP printer does not have WPS push button mode, open the settings in the printer control panel. (Note: You can skip step 9 if the router has the WPS button.)

Then tap on the Network Setup option.

Next, you are required to navigate to Wireless Settings.

Choose the Wi-Fi Protected Setup option.

After that, you need to use the Push Button option.

Then, select the Start option.

Afterward, you should press and hold the Wi-Fi key for 3 seconds.

In addition, press and hold the WPS button on your router for 3 to 5 seconds.

Now, wait for the printer to connect until the Wi-Fi icon starts blinking or a “connected” message appears on the display. 

The process could be a little challenging based on the various factors. So, if you bump into any problems or the connection is not complete yet, then make sure to look for more help.