Fix B80B4696 Error on HP Printer

Using the HP printer can come with many challenges like any other printer. As a result, if you are seeing the error code B80B4696, then there is nothing much to worry about. The key cause of seeing this error code on your device could be the result of the firmware or software issue. 

With the help of some minor changes and troubleshooting you can easily get your printer working perfectly once again. If you are facing this problem and unable to get rid of the issue then it would be good to take a look at the below steps to remove the issue. Make sure to follow the below steps carefully to quickly fix the issue. 

• Initially you are required to switch on your printer device. Also ensure the printer's cord is directly connected to the wall outlet.

• After that you need to leave the printer on and idle for at least one hour.

• When the 1 hour rest is complete, with the printer turned on, disconnect the power cord from the printer.

• In addition, you are required to remove the power cord from the wall outlet. 

• Then, you should wait for around 60 seconds. 

• Next, attach the power cable back into the wall outlet.

• Also, connect the cable to your HP printer. 

• If your printer does not turn on automatically then turn it on.

Source:- Fix B80B4696 Error on HP Printer