Replacing or installing HP DeskJet 2855e ink cartridges is a 2-minute process if you know the methods step-by-step. This printer has two doors to open. You’re required to open the cartridge access door to set up the cartridge. Here is what you need to do before the actual process:
Turn on your printer.
Load plain paper.
Don’t open the new sealed cartridge.
Steps to Replace a Cartridge
Start by opening the front door and the cartridge access door.
Let the carriage move and stop, and don’t do anything while it’s moving.
Release the old cartridge by pressing down on it and pulling it out.
Unbox the new cartridge and take off the protective tape.
Now, slide the cartridge into the slot and push until it clicks.
Finally, close the cartridge access door and the front door.
Steps to Align the Cartridge
Lift the scanner lid and keep the alignment page face down on the glass.
Close the lid and hit the Black Copy button.
Your printer will scan the page. Alignment is done when you notice a blinking A.
If your cartridge doesn’t recognize:
Take off the cartridge and check everything.
Verify the number is HP 67 or HP 67 XL.
Push the cartridge firmly until it clicks.
Ensure that your printer is online.
Turn the printer off and disconnect it for a while, and then turn it back on.
Source: HP DeskJet 2855e Ink Cartridges