Connect HP Printer to WiFi

The all-new HP printer has finally arrived at your doorstep. But there’s one thing you need to learn to print wirelessly from your new printer: make sure it is connected to your WiFi network. That’s quite simple, but if you find it confusing, do as mentioned here: 

Install HP Smart App 

• Go to start.hp.com or search for the HP Smart app in your device’s app store.
  
  

• Install the app on your device (phone, laptop, tablet).
  
  

• Power on your printer.
  
  

• Press and hold the Wireless button for about 5 seconds until the wireless light starts blinking blue. This means the printer is ready to connect to WiFi.
  
  

• Launch the app and sign in or create an HP account
  
  

• Tap “Set Up a New Printer.”The app will automatically search for available printers.
  
  

• Choose your home WiFi network from the list. If you see both 2.4 GHz and 5 GHz networks, select the 2.4 GHz network because most HP printers work only with 2.4 GHz WiFi.
  
  

• Type your WiFi password and tap Continue. Wait for the printer to connect.
  
  

• Once connected, follow the prompts to finish the installation.
  
  

Connect via Wireless Setup Wizard

• On your HP printer screen, tap the Settings or Wireless icon.
  
  

• Go to Network > Wireless Setup Wizard or Setup > Wireless Settings.
  
  

• Tap Wireless Setup Wizard, then let the printer scan for nearby WiFi networks.
  
  

• Wait a few seconds for the network list to appear.
  
  

• Select your WiFi network from the list.
  
  

• If you see both 2.4 GHz and 5 GHz networks, choose the 2.4 GHz network for a more stable printer connection.
  
  

• Use the printer’s on-screen keyboard to type your WiFi password carefully.
  
  

• Tap OK, Done, or Connect.
  
  

• The printer will now try to connect to WiFi. If the wireless light turns solid, it means your printer is successfully connected.
  
  

Connect via WPS Push Button 

• Look for a button labeled WPS on the back or side of the WiFi router.
  
  

• Turn on your printer and place it near the router.
  
  

• Press and hold the Wireless button until the wireless light starts blinking.
  
  

• Within a minute or two, then press the WPS button on your router.
  
  

• The router and printer will automatically connect without needing the WiFi password.
  
  

• Wait for some moments for the connection to establish.
  
  

• Once the wireless light on the printer becomes steady, the setup is complete.
  
  

• The printer is now connected to WiFi and ready to print wirelessly.

Source:- Connect HP Printer to WiFi