Connecting the HP LaserJet MFP M234dwe to a wireless network is simple. But there are potential challenges that could disrupt the setup, such as a weak Wi-Fi signal, a wrong password, a hidden network name (SSID), or outdated printer firmware.
Here is all you need to do to get your HP LaserJet MFP M234dwe printer connected to Wi-Fi:
Check if the printer is powered on or not.
Insert some printer paper sheets into the front tray.
On the control panel, look for the information (i) button. Press and hold this button until the Cancel & Reset buttons light up with the (i) button.
Next, press and hold the (i) button for three seconds.
Press and hold the Wireless and Resume buttons together, and release them.
A printout containing the Wi-Fi Direct name and password will come out.
On your mobile device, open Settings and tap on the WiFi icon.
Make sure your WiFi is on, then search for nearby devices.
Select your printer’s Wi-Fi Direct name when it appears.
Enter your Wi-Fi Direct password, and after that tap Connect or Join.
Your device connects to the printer through WiFi Direct.