How to Connect Brother Printer to WiFi

How to Connect Brother Printer to WiFi - Quick Wireless Setup Guide

Connecting a Brother printer to WiFi is a task of a few minutes. These are the ideal methods to get this done right: 

Control Panel Setup Wizard

• Press the Menu button. 

• Navigate to Network using the arrow buttons, and press OK.

• Select WLAN, press OK.

• Choose Setup Wizard, press OK.

• When the “Enable WLAN?” message appears, press the up arrow button or Yes.

• The printer will scan and show a list of nearby networks. Select your WiFi network name and press OK.

• Double-check that the network name is correct, select Yes, and press OK.

If successful, you’ll see a “Connected” message, and the WiFi indicator light on the front panel will remain solid. The printer may also print a wireless confirmation page.

WPS Push-Button

• On the control panel, select Menu > Network > WLAN > WPS option.

• Select Start or Push Button, press OK.

• Press and hold the WPS button on your router for 2 to 3 seconds until the WPS light blinks.

• The printer will connect to the router. Once the WiFi indicator light on the printer turns solid, it means the connection is successful.

WPS PIN Method 

• On the printer, select Menu > Network > WLAN > WPS w/ PIN Code. 

• The printer will display an 8-digit PIN code. Write down this PIN.

• Open your router’s admin page (usually 192.168.1.1 or 192.168.0.1) and sign in.

• Go to the WPS settings section and enter the PIN.

• Select Submit/Apply. The printer should connect within just 1 minute, but the exact time can vary.

Source: How to Connect Brother Printer to WiFi