Resolving Comma GUI access when restoring a back-up configuration with the incorrect hardware

When restoring a back-up configuration specifically from an Com.X5 to a Com.X10, in which you also restore the Hardware component from the X5, you will be kicked out of the Comma GUI, as you will be restoring a MPX device, which is not a hardware component of the Com.X10.

1. SSH into the Com.X(See How to SSH into a Wanderbox or Com.X)
2. Edit /etc/comma.conf to remove incorrect Hardware device, by typing: sudo nano /etc/comma.conf
3. Remove everything from comma.conf except the below.

1. Once the lines have been remove select 'Ctrl + X 'to exit
2. Select 'Y' to save changes

1. Select enter to write changes to file name /etc/comma.conf
2. Stop asterisk by typing: sudo /etc/init.d/asterisk stop
3. Stop dahdi by typing: sudo /etc/init.d/dahdi stop
4. Edit /etc/dahdi/system.conf, by typing: sudo nano /etc/dahdi/system.conf
5. Remove everything from system.conf expect the below.

1. Once the lines have been remove select 'Ctrl + X 'to exit
2. Select 'Y' to save changes

1. Select enter to write changes to file name /etc/dahdi/system.conf
2. Edit /etc/asterisk/zapata_additional.conf, by typing: sudo nano /etc/asterisk/zapata_additional.conf
3. Remove everything from zapata_additional.conf
4. Once the lines have been remove select 'Ctrl + X 'to exit
5. Select 'Y' to save changes

1. Select enter to write changes to file name /etc/asterisk/zapata_additional.conf
2. Start dahdi by typing: sudo /etc/init.d/dahdi start
3. Start asterisk by typing: sudo /etc/init.d/asterisk start
4. Restart the GUI by typing: sudo /etc/init.d/comma-gui restart.
5. Access the Comma GUI