Basic Trunk Setup

Analogue Trunk Groups

Analogue and BRI trunks can be grouped to facilitate simplified routing. PRI channels are always grouped into a trunk per PRI. Each analogue and BRI trunk may only belong to one group, containing only members of the same the trunk type (analogue or BRI).

1. Log into Comma GUI of unit. (https://sites.google.com/site/comxwiki/how-to-log-into-the-comma-gui-of-your-com-x)

2. Select Start

3. Select Configuration

4. Select Trunks tab

5. Expand Trunk Ports

6. Expand Analog Trunk

7. Right click on Analog port. ( Will either be an FXO or BRI port)

8. Select New Group

9. Enter a suitable Name.( Analogue groups (FXO) may only be numbers from 1 – 62, and BRI groups may be any unique combination of alpha-numeric characters.)

10. Select Review Apply

SIP Trunks

Multiple SIP trunks can be configured for call routing. SIP trunks can also act as a SIP providers, providing the capability to configure back-to-back SIP trunks for inter-office connections.

1. Log into Comma GUI of unit. (https://sites.google.com/site/comxwiki/how-to-log-into-the-comma-gui-of-your-com-x)

2. Select Start

3. Select Configuration

4. Select Trunks tab

5. Select Add

6. Select SIP Provider

SIP trunk basic configuration:

7. Configure SIP trunk by adding relevant information.( See below example)

8. Select Accept

9. Select Review Apply