Accessing Wanderbox via WI-FI and USB

Accessing Wanderbox via USB port

The Wanderbox server supports console access via its USB2.0 OTG port using a USB-A(M) to USB-A(M) cable

1. Connect the USB cable to the Wanderbox and your PC

2. Wait for the network to establish.

3.Once connection is established you will be able to access Wanderbox from the IP address 192.168.102.1

• Comma GUI access
• SSH access via terminal or Putty

Accessing Wanderbox via Wi-fi

The Wanderbox server supports SSH and GUI access via its Wi-FI access point, with WLAN standards of IEEE 802.11b/g/n, 2.4GHZ. on the wlan0 interface.

1. Ensure the antenna is connected to the Wanderbox.

2. Ensure laptop or tablet device supports WPA2/PSK.

3. On your device go to Wi-Fi settings

4. locate the SSID of your Wanderbox which will the serial number of unit in the form of “FSN8Xxxxxx”

5. When prompted for password, enter 'wanderbox' as pass phrase

6. On connecting successfully you will receive an IP address and the unit will be the gateway address on your Wi-Fi network settings

7. Once connection is established you will be able to access the Wanderbox from the IP address 192.168.104.1

Wanderbox Duo Wi-Fi Access Point connectivity:

WLAN standards : IEEE 802.11b/g/n, 2.4GHz

Interface : wlan0

Channel : 1

ssid

: (Defaulted to the system serial number,eg. “FSN8Xxxxxx”)

wpa_passphrase

: wanderbox

If you are going to connect via Wi-Fi please ensure the antenna is connected to the

Wanderbox Duo and that your laptop or tablet supports WPA2 /PSK.

On your device go to Wi-Fi settings and locate the SSID of your

Wanderbox“FSN8Xxxxxx”

You will now be prompted for a pass_phrase. The pass_phrase may be changed in

the GUI under networking.

On connecting successfully you will receive an IP address and the unit will be the

gateway address on your Wi-Fi network settings.

Open your browser (chrome is recommended) and browse to the IP address in the

browser address bar.