1. Wanderbox Uno

By default, the Wanderbox ships with the LAN1 port (Eth0) configured to act as a DHCP client. Also configured on the same physical ethernet port is a VLAN port, with VLAN ID 103, configured with the IP address 192.168.103.1.

LAN2 (Eth1) is available to support an internally connected 4-port telephony card OR an externally connected Ethernet port (designated LAN2).The default IP address is 192.168.101.1.

Figure 1: Default network settings of a Wanderbox Uno

USB0 port acts as a DHCP server by default. This port is configured with the ip address 192.168.102.1 by default.

Finally, each Wanderbox is shipped with an active WLAN Access Point serving DHCP. The WiFi AP is named the device “serial number”. The default password is 'wanderbox”. The default IP address of this port is 192.168.104.1

2. Wanderbox Duo

The Wanderbox Duo has the same basic default network configuration to the Wanderbox Uno. However, as in its name, Wanderbox duo supports two additional LAN ports, both of which can support an internally connected 4-port telephony card OR an externally connected Ethernet port. These are designated:

• LAN2 (Eth1), default IP address is 192.168.101.1
• Slot 1 (Eth2), default IP address is 192.168.105.1