Cardboard Challenge

OHIO LEARNING STANDARDS FOR TECHNOLOGY (2017):

STRAND: Information and Communications Technology

The understanding and application of digital learning tools for accessing, creating, evaluating, applying and communicating ideas and information.

Topic 3: Use digital learning tools and resources to construct knowledge.

Grade 3-5

• Create artifacts using digital learning tools and resources to demonstrate knowledge.

Grade 6-8

• Create artifacts using digital learning tools and resources to demonstrate knowledge.

Grade 9-12

• Create artifacts using digital learning tools and resources to demonstrate knowledge.


ACTIVITIES:

  1. You will be using the Shenhui SH-G350 and RD Works V8 to design the project and the Shenhui SH-G350 to produce the work.
  2. Your Limits are:
    1. Use the provided cardboard (570 mm x 170 mm)
    2. You will be allowed a maximum of 3 minutes light time
    3. Must have a vector cut line (CUT). Recommended settings are:
      1. SPEED: 35 mm/s
      2. POWER: 60%
    4. Must have vector text (SCAN). Recommended settings are:
      1. SPEED: 200 mm/s
      2. POWER: 30%


ASSESSMENT:

  • You must complete the Check Out Sheet (below) and have your work inspected by Mr. Lesnansky
  • You must then share the file in Google Classroom


SCORING GUIDE:

  • This is a simple assignment that will be engraved on the Laser Engraver.
  • If you ever have a question on a grade please see the instructor!


LATE WORK/MAKE-UP ASSIGNMENT:

  • If you are absent from school or do not complete the assignment on time, you must inform Mr. Lesnansky to check the assignment. This needs to be done early in the grading period as it creates a storage system for all of the documents that you will be creating this year. (NOTE: A point deduction may be enforced for late work not due to an excused absence.)


DEPTH OF KNOWLEDGE QUESTIONS:

  1. DoK1: What other word would you like?
  2. DoK2: How would graphics effect the piece?
  3. DoK3: Can you design something to be laser engraved?
  4. DoK4: Describe the difference between engraving and cutting.


CHECK OUT SHEET:

Laser Engraver>Cardboard Challenge (CHECK OUT SHEET)