Purpose

The purpose of this procedure is to control and prevent the pollution of soil, water, and other environmental aspects through sound processing of wastes.

Scope

This process applies to all internal operations and activities which produce wastes.

Description of Activity

Disposal of Organic Wastes and Garbage

All organic wastes, including food, will be collected in waste receptacles dispersed through-out the facility. These receptacles will be collected and disposed of properly by ensuring they do not affect the environment and do not create any biological degradation and/or hazards.

Once a receptacle is filled, the receptacle is dumped into a larger dumpster outside of the facility and is periodically picked up by a local waste disposal municipality or contractor thereof.

Control & Prevention of Soil Pollution

SkyVine ITAD takes a number of preventive and corrective actions to control and/or prevent soil pollution. These measures include:

• Identifying, repairing, and/or replacing valves on drums/tanks

• Monitoring storage/transfer tanks while filling by checking quantity meters to avoid overflow

• All hoses used to transfer chemicals are emptied before removing from drums/tanks before storage

• Trays are used to contain pipes, flanges, valves, and other openings while transferring chemicals. Collected run-off is replaced back into the drum/tank

• When a minor leak is observed, a tray is used to contain the leak immediately.

• Storage tanks and valves are closed immediately in the case of a rupture in a line or pipe.

• Pipelines are always drained-off after transferring chemicals to avoid pressure build-up in the pipeline and possible failure of valves/gaskets

• All materials used to contain, or clean-up leaks are ensured to be disposed of properly and not disposed of in organic wastes/garbage receptacles.

Control & Prevention of Air Pollution

SkyVine ITAD takes a number of preventive and corrective actions to control and/or prevent air pollution. These measures include:

• Vehicle drivers will not drive their vehicles at a speed faster than 15 miles per hour (MPH)

• All vehicle engines will be stopped and shut down while loading/unloading

• All vehicles will be inspected for valid explosive licenses/permits before entering the company premises if they are transporting hazardous explosive materials

• Open exposure of oils is not permitted, and any leakages are immediately contained to avoid evaporation

• All flammable materials are not permitted within the solvent storage area or near explosive materials

• All grounds landscaping and plant life are cared for properly

Control & Prevention of Water Pollution

SkyVine ITAD takes a number of preventive and corrective actions to control and/or prevent water pollution. These measures include:

• Water should never be mixed with oil

• Clean drinking water is provided by a 3^rd party company or through the city of Arlington, TX

• The use of chemicals should be strictly cared for to ensure no contamination effects to humans, air, or water

• Any samples retrieved from chemicals or water-mixtures must be contained and labeled properly

• All water used to wash/clean equipment which may contain hazardous materials and/or chemicals will be tested for contamination and if failing for toxicity or if untested will be processed through an effluent treatment facility. If tested and not found to be failing for toxicity will be disposed with sewer system disposal.

Related and Supporting Documents

10.2.4-F Spill or Release Report

Document Revision History

Rev. Description of Change Approved Date Approved By

0 New 01/07/2022 C. Vo

Pollution Control Procedure Test