Push-Button Functions

All physical function on an OTA Node

Contents

Wake Up

Silence Speaker:

Min/Max Reset:

Turn Off Device:

Delete Wi-Fi SSID and Password:

Wake Up Device

Wake Up

To get the most current reading and time stamp, press the center button to wake up the device and reset the screen. The yellow light will turn on solid, and the screen will reset.

Turn Off Speaker

Silence Speaker:

To silence the audible alarm speaker, hold the center button for five seconds. The yellow light will flash until you release. Once the button is released, the yellow light will turn solid and the screen will reset. This will silence the audible alarm until the next time the device wakes up and take a reading. In order to permanently disable the audible alarm, it must be disabled from the cloud.

Min/Max Reset:

The minimum and maximum readings on the display are constantly updated from when the device is turned on. But, the minimum and maximum readings can be reset at any time. The following push-button sequence will accomplish this.

1. Press and hold the center and right buttons simultaneously. The green and yellow light will flash.

2. Once the green light turns off, release the right button.

3. Release the center button but continue holding the right button. The yellow light will remain solid and the green light will flash.

Turn Off Device

Turn Off Device:

To turn off your device. Press and hold the center button for 10 seconds. The screen will flash and turn off. To turn the device back on, press the center button once to reset/wake up the device.

Delete Wi-Fi Information

Delete Wi-Fi SSID and Password:

To clear the memory on the device for the Wi-Fi information that has been configured, follow the steps below:

Hold the left and center button for 10 seconds until the device stops alarming and blinking red.

Once the Wi-Fi information has been deleted, follow the Wi-Fi setup steps under Setting Up Your Device.

Page updated

Report abuse