SPRAY PAINTING TENT

The DCI Lab is happy to provide a tent for spray painting large projects. Please ask a staff member for assistance in locating, assembling, and disassembling the tent.

Rules:

You must disassemble and store the tent back in it's original location after you have finished using it.
The tent must have sandbags on all four corners at all times to ensure that the tent can endure wind conditions.
The tent must be set up outside, specifically between Swenson Hall and the Wilson Football Field. See below for more details regarding this location.

STORING LOCATION: Tech Shop (N106)

Located on top of the yellow flammable cabinet

(where the spray paint is!)

SET UP LOCATION DETAILS

Please set up the spray tent between Wilson Field and Swenson Hall

Street Address:
E Walnut Ave

ASSEMBLY DETAILS

Step 1: Unfold and snap rods together.

Step 2: Slide rods into the top of the tent (1 rod per slit). The front rod will be bent towards the back, and the back rod will be bent towards the front to create an "X" across each side of the tent.

Step 3: Snap rods into place near the bottom of the tent.

Step 4: Clip the black clips to the rods.

For a more detailed video explanation, click the video below or click HERE!

DISASSEMBLY DETAILS

Step 1: Take the rods out of the tent.

Step 2: Fold the rods.

Step 3: Fold the tent.

Step 4: Place the tent and rods back in the corresponding black bags.

Page updated

Report abuse