Embedded Files
SRP player is available on the computers in the makerspace but if you would like to download it onto your computer, follow the steps below.
Download the folder here (you will have to sign in with your chapman ID).
Unzip the folder and select the Menu application file
Select Custom Install
Install SRP Player and the MDX-50 Driver. The rest are not important for your computer.
When you are installing the driver, make sure to change Port to FILE:
Go through the prompts to finish installing.
Open SRP Player and click Next on the Initialization window.
It will check if the machine is plugged into your computer, when it can't find it select Choose a supported cutting machine not on the list and select MDX-50 and click Next.
Check the Rotary Axis Unit box.
Click through the next few prompts and change the units to inches when the option appears.
Under the register my tools prompt, check the boxes for 1/32", 1/16", 1/8", and 1/4" Ball as well as 1/8" and 1/4" Square end mills.
Then click Next then Finish.
Next go to Options > Configure magazine
Fill out the setup according the list on the left.
This tells the machine which tools are in which slots for the automatic tool changer.
Double check with a staff member that these tools are still correct.
You have now installed SRP player! You are welcome to delete the folder if you'd like.
Page updated
Report abuse