USB cable
* Connect the MC-101 to the computer via USB and perform the update using USB bus power.
* Provide a cable suitable for connection to the computer you're using.
* Do not carry out the update using battery power.
STEP 1: Updating the MC-101 System Program
Use the following procedure to update the MC-101 using and SD card.
Download the "MC101_UPA_up.bin" to you computer.
Copy the "MC101_UPA_up.bin" file to the root folder of the SD card.
* If you're using a new SD card, format it on the MC-101 first.
Safely remove the SD card from your computer and carefully insert it into the MC-101.
With the unit switched off, hold down the [SHIFT] button and turn the MC-101 on. The update will then start.
The message "Complete!!" will appear on the display once the update process is complete.
Restart the unit.
Following an update, the message "Upd Sub Cpu" sometimes appears.
If this is the case, wait until the message "Complete!!" appears and then restart the unit.
STEP 2: Returning to the Factory Settings
* Performing the procedure in "Returning to the Factory Settings (Factory Reset)" initializes the "System Settings" items. We apologize for the inconvenience, but please configure these again.
Hold down the [ SHIFT ] button and press the [ FILTER ] button to display the UTILITY menu.
Turn the [ VALUE ] dial to select "FACTORY RESET," then press the [ VALUE ] dial.
A confirmation message appears.
To execute, use the [ VALUE ] dial to select "OK," and press the [ VALUE ] dial.
When the display indicates "Complete" turn the MC-101's power off and on again