Embedded Files
Hotkeys Action Code Example
Select Hotkey input_enable_hotkey_btn = "6"
Select+Start Exit input_exit_emulator_btn = "7"
Select+Right Shoulder Save input_save_state_btn = "5"
Select+Left Shoulder Load input_load_state_btn = "4"
Select+Right Input State Slot Increase input_state_slot_increase_btn = "h0right"
Select+Left Input State Slot Decrease input_state_slot_decrease_btn = "h0left"
Select+X RGUI Menu input_menu_toggle_btn = "3"
Select+B Reset input_reset_btn = "0"
2 Player Start and Mame Menu are configured through mame menu NOT rgui and retroarch.
\\centipede\configs\all\retroarch-joypads\DragonRise Inc. Generic USB Joystick .cfg
Retroarch Config Files
https://retropie.org.uk/forum/topic/22816/guide-retroarch-system-emulator-core-and-rom-config-files
base retroarch config is here
/opt/retropie/configs/all/retroarch.cfg
# If set to a directory, the content history playlist will be saved# to this directory.# content_history_dir =
# Automatically saves a savestate at the end of RetroArch's lifetime.# The path is $SRAM_PATH.auto.# RetroArch will automatically load any savestate with this path on startup if savestate_auto_load is set.# savestate_auto_save = false# savestate_auto_load = true
# Load libretro from a dynamic location for dynamically built RetroArch.# This option is mandatory.
# Path to a libretro implementation.# libretro_path = "/path/to/libretro.so"
# Sets log level for libretro cores (GET_LOG_INTERFACE).# If a log level issued by a libretro core is below libretro_log_level, it is ignored.# DEBUG logs are always ignored unless verbose mode is activated (--verbose).# DEBUG = 0, INFO = 1, WARN = 2, ERROR = 3.# libretro_log_level = 0
# Enable or disable verbosity level of frontend.# log_verbosity = false
# If this option is enabled, every content file loaded in RetroArch will be# automatically added to a history list.# history_list_enable = true
# Enable performance counters# perfcnt_enable = false
# Path to core options config file.# This config file is used to expose core-specific options.# It will be written to by RetroArch.# A default path will be assigned if not set.core_options_path = "/opt/retropie/configs/all/retroarch-core-options.cfg"
# Path to content history file.# RetroArch keeps track of all content loaded in the menu and from CLI directly for convenient quick loading.# A default path will be assigned if not set.# content_history_path =
# Path to music content history file (optional).# RetroArch keeps track of all music content loaded in the menu and from CLI directly for convenient quick loading.# A default path will be assigned if not set.# content_music_history_path =
# Path to image content history file (optional).# RetroArch keeps track of all image content loaded in the menu and from CLI directly for convenient quick loading.# A default path will be assigned if not set.# content_image_history_path =
# Path to video content history file (optional).# RetroArch keeps track of all video content loaded in the menu and from CLI directly for convenient quick loading.# A default path will be assigned if not set.# content_video_history_path =
# Number of entries that will be kept in content history file.# content_history_size = 200
# Content directory. Interacts with RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY.# Usually set by developers who bundle libretro/RetroArch apps to point to assets.# content_directory =
# Sets start directory for menu config browser.# rgui_config_directory =
# Show startup screen in menu.# Is automatically set to false when seen for the first time.# This is only updated in config if config_save_on_exit is set to true, however.rgui_show_start_screen = "false"
# Flushes config to disk on exit. Useful for menu as settings can be modified.# Overwrites the config. #include's and comments are not preserved.config_save_on_exit = "false"
# Shows hidden files and folders in directory listings.# show_hidden_files = false
#### Driver
# Input driver. Depending on video driver, it might force a different input driver.# input_driver = sdl
# Joypad driver. ("udev", "linuxraw", "paraport", "sdl2", "hid", "dinput")input_joypad_driver = "udev"
# Video driver to use. "gl", "xvideo", "sdl", "d3d"# video_driver = "gl"
# Which context implementation to use.# Possible ones for desktop are: glx, x-egl, kms-egl, sdl-gl, wgl.# By default, tries to use first suitable driver.# video_context_driver =
# Audio driver backend. Depending on configuration possible candidates are: alsa, pulse, oss, jack, rsound, roar, openal, sdl, xaudio.# audio_driver =
# Audio resampler driver backend. Which audio resampler to use.# Default will use "sinc".# audio_resampler =
# Camera driver.# camera_driver =
# Location driver.# location_driver =
# Menu driver to use. ("rgui", "xmb", "glui")menu_driver = "rgui"
# Record driver. Used when recording video.# record_driver =
#### Video
# Suspends the screensaver if set to true. Is a hint that does not necessarily have to be honored# by video driver.# suspend_screensaver_enable = true
# Display framerate.# fps_show = false
# Display memory.# memory_show = false
# Display total number of frames rendered. (only displays if fps_show is enabled)# framecount_show =
# Which monitor to prefer. 0 (default) means no particular monitor is preferred, 1 and up (1 being first monitor),# suggests RetroArch to use that particular monitor.# video_monitor_index = 0
# Start in fullscreen. Can be changed at runtime.# video_fullscreen = false
# If fullscreen, prefer using a windowed fullscreen mode.# video_windowed_fullscreen = true
# Fullscreen resolution. Resolution of 0 uses the resolution of the desktop.# video_fullscreen_x = 0# video_fullscreen_y = 0
# Video refresh rate of your CRT monitor.# Used to calculate a suitable audio input rate.# crt_video_refresh_rate = 59.94
# Video refresh rate of your monitor.# Used to calculate a suitable audio input rate.# video_refresh_rate = 59.94
# Forcibly disable sRGB FBO support. Some Intel OpenGL drivers on Windows# have video problems with sRGB FBO support enabled.# video_force_srgb_disable = false
# If this is true and video_aspect_ratio is not set,# aspect ratio is decided by libretro implementation.# If this is false, 1:1 PAR will always be assumed if video_aspect_ratio is not set.video_aspect_ratio_auto = "true"
# A floating point value for video aspect ratio (width / height).# If this is not set, aspect ratio is assumed to be automatic.# Behavior then is defined by video_aspect_ratio_auto.# video_aspect_ratio =
# Windowed x resolution scale and y resolution scale# (Real x res: base_size * xscale * aspect_ratio, real y res: base_size * yscale)# video_scale = 3.0
# Percentage of opacity to use for the window (100 is completely opaque).# video_window_opacity = 100
# Whether to enable the default window decorations like border, titlebar etc.# video_window_show_decorations = true
# Forcibly disable composition. Only works in Windows Vista/7 for now.# video_disable_composition = false
# Video vsync.# video_vsync = true
# Interval at which a Vsync swap is performed.# 1 is normal, 2 is doubled frames, 3 is tripled frames, etc.# video_swap_interval = 1
# Max amount of swapchain images.# Single buffering = 1, Double buffering = 2, 3 = Triple buffering# video_max_swapchain_images = 3
# Attempts to hard-synchronize CPU and GPU. Can reduce latency at cost of performance.# video_hard_sync = false
# Sets how many frames CPU can run ahead of GPU when using video_hard_sync.# Maximum is 3.# video_hard_sync_frames = 0
# Sets how many milliseconds to delay after VSync before running the core.# Can reduce latency at cost of higher risk of stuttering.# Maximum is 15.# video_frame_delay = 0
# Inserts a black frame inbetween frames.# Useful for 120 Hz monitors who want to play 60 Hz material with eliminated ghosting.# video_refresh_rate should still be configured as if it is a 60 Hz monitor (divide refresh rate by 2).# video_black_frame_insertion = false
# Use threaded video driver. Using this might improve performance at possible cost of latency and more video stuttering.video_threaded = "true"
# Use a shared context for HW rendered libretro cores.# Avoids having to assume HW state changes inbetween frames.# video_shared_context = false
# Smoothens picture with bilinear filtering. Should be disabled if using pixel shaders.# video_smooth = true
# Forces rendering area to stay equal to content aspect ratio or as defined in video_aspect_ratio.# video_force_aspect = true
# Only scales video in integer steps.# The base size depends on system-reported geometry and aspect ratio.# If video_force_aspect is not set, X/Y will be integer scaled independently.# video_scale_integer = false
# Index of the aspect ratio selection in the menu.# 19 = Config, 20 = 1:1 PAR, 21 = Core Provided, 22 = Custom Aspect Ratio# aspect_ratio_index = 19
# Forces cropping of overscanned frames.# Exact behavior of this option is implementation specific.# video_crop_overscan = true
# Path to shader. Shader can be either Cg, CGP (Cg preset) or GLSL, GLSLP (GLSL preset)# video_shader = "/path/to/shader.{cg,cgp,glsl,glslp}"
# Load video_shader on startup.# Other shaders can still be loaded later in runtime.video_shader_enable = "true"
# CPU-based video filter. Path to a dynamic library.# video_filter =
# Path to a font used for rendering messages. This path must be defined to enable fonts.# Do note that the _full_ path of the font is necessary!# video_font_path =
# Size of the font rendered in points.video_font_size = "24"
# Enable usage of OSD messages.# video_font_enable = true
# Offset for where messages will be placed on screen. Values are in range 0.0 to 1.0 for both x and y values.# [0.0, 0.0] maps to the lower left corner of the screen.# video_message_pos_x = 0.05# video_message_pos_y = 0.05
# Color for message. The value is treated as a hexadecimal value.# It is a regular RGB hex number, i.e. red is "ff0000".# video_message_color = ffffff
# Background color for OSD messages. Red/Green/Blue values are from 0 to 255 and opacity is 0.0 to 1.0.# video_message_bgcolor_enable = false# video_message_bgcolor_red = 0# video_message_bgcolor_green = 0# video_message_bgcolor_blue = 0# video_message_bgcolor_opacity = 1.0
# Allows libretro cores to set rotation modes.# Setting this to false will honor, but ignore this request.# This is useful for vertically oriented content where one manually rotates the monitor.# video_allow_rotate = true
# Forces a certain rotation of the video.# The rotation is added to rotations which the libretro core sets (see video_allow_rotate).# The angle is <value> * 90 degrees counter-clockwise.# video_rotation = 0
# Forces a certain orientation of the screen from the operating system.# The angle is <value> * 90 degrees counter-clockwise.# screen_orientation = 0
#### Audio
# Enable audio.# audio_enable = true
# Enable menu audio sounds.# audio_enable_menu = false# audio_enable_menu_ok = false# audio_enable_menu_cancel = false# audio_enable_menu_notice = false# audio_enable_menu_bgm = false
# Mutes audio.# audio_mute_enable = false
# Mutes audio mixer volume globally.# audio_mixer_mute_enable = false
# Audio output samplerate.# audio_out_rate = 48000
# Override the default audio device the audio_driver uses. This is driver dependant. E.g. ALSA wants a PCM device, OSS wants a path (e.g. /dev/dsp), Jack wants portnames (e.g. system:playback1,system:playback_2), and so on ...# audio_device =
# Audio DSP plugin that processes audio before it's sent to the driver. Path to a dynamic library.# audio_dsp_plugin =
# Will sync (block) on audio. Recommended.# audio_sync = true
# Desired audio latency in milliseconds. Might not be honored if driver can't provide given latency.# audio_latency = 64
# Enable audio rate control.# audio_rate_control = true
# Controls audio rate control delta. Defines how much input rate can be adjusted dynamically.# Input rate = in_rate * (1.0 +/- audio_rate_control_delta)# audio_rate_control_delta = 0.005
# Controls maximum audio timing skew. Defines the maximum change in input rate.# Input rate = in_rate * (1.0 +/- max_timing_skew)# audio_max_timing_skew = 0.05
# Audio volume. Volume is expressed in dB.# 0 dB is normal volume. No gain will be applied.# Gain can be controlled in runtime with input_volume_up/input_volume_down.# audio_volume = 0.0
# Audio mixer volume. Volume is expressed in dB.# 0 dB is normal volume. No gain will be applied.# audio_mixer_volume = 0.0
#### Overlay
# Enable the overlay.# input_overlay_enable = true
# Hide the current overlay from appearing inside the menu.# input_overlay_hide_in_menu = true
# Path to input overlay.# input_overlay =
# Opacity of all the UI elements of the overlay.# input_overlay_opacity = 1.0
# Scale of all UI elements of the overlay.# input_overlay_scale = 1.0
#### Input
# Path to input remapping file.# input_remapping_path =
# Input bind timer timeout.# Amount of seconds to wait until proceeding to the next bind. Default: 5, minimum: 1# input_bind_timeout = 1
# If enabled, overrides the input binds with the remapped binds set for the current core.# input_remap_binds_enable = true
# Maximum amount of users supported by RetroArch.# input_max_users = 16
# Keyboard layout for input driver if applicable (udev/evdev for now).# Syntax is either just layout (e.g. "no"), or a layout and variant separated with colon ("no:nodeadkeys").# input_keyboard_layout =
# Defines axis threshold. Possible values are [0.0, 1.0]# input_axis_threshold = 0.5
# input_analog_deadzone = 0.0
# input_analog_sensitivity = 1.0
# Enable input auto-detection. Will attempt to autoconfigure# joypads, Plug-and-Play style.input_autodetect_enable = "true"
# Show the input descriptors set by the core instead of the# default ones.# input_descriptor_label_show = true
# Hide input descriptors that were not set by the core.# input_descriptor_hide_unbound = false
# Influence how input polling is done inside RetroArch.# 0 : Early - Input polling is performed before call to retro_run.# 1 : Normal - Input polling is performed when retro_input_poll is# requested.# 2 : Late - Input polling is performed on first call to retro_input_state# per frame## Setting it to 0 or 2 can result in less latency depending on# your configuration.## When netplay is enabled, the default polling behavior (1) will# be used regardless of the value set here.# input_poll_type_behavior = 1
# Sets which libretro device is used for a user.# Devices are indentified with a number.# This is normally saved by the menu.# Device IDs are found in libretro.h.# These settings are overridden by explicit command-line arguments which refer to input devices.# None: 0# Joypad (RetroPad): 1# Mouse: 2# Keyboard: 3# Generic Lightgun: 4# Joypad w/ Analog (RetroPad + Analog sticks): 5# Multitap (SNES specific): 257# Super Scope (SNES specific): 260# Justifier (SNES specific): 516# Justifiers (SNES specific): 772
# input_libretro_device_p1 =# input_libretro_device_p2 =# input_libretro_device_p3 =# input_libretro_device_p4 =# input_libretro_device_p5 =# input_libretro_device_p6 =# input_libretro_device_p7 =# input_libretro_device_p8 =
# Keyboard input. Will recognize letters ("a" to "z") and the following special keys (where "kp_"# is for keypad keys):## left, right, up, down, enter, kp_enter, tab, insert, del, end, home,# rshift, shift, ctrl, alt, space, escape, add, subtract, kp_plus, kp_minus,# f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12,# num0, num1, num2, num3, num4, num5, num6, num7, num8, num9, pageup, pagedown,# keypad0, keypad1, keypad2, keypad3, keypad4, keypad5, keypad6, keypad7, keypad8, keypad9,# period, capslock, numlock, backspace, multiply, divide, print_screen, scroll_lock,# tilde, backquote, pause, quote, comma, minus, slash, semicolon, equals, leftbracket,# backslash, rightbracket, kp_period, kp_equals, rctrl, ralt## Keyboard input, Joypad and Joyaxis will all obey the "nul" bind, which disables the bind completely,# rather than relying on a default.input_player1_a = "a"input_player1_b = "b"input_player1_y = "y"input_player1_x = "x"input_player1_start = "ralt"input_player1_select = "rctrl"input_player1_l = "insert"input_player1_r = "pageup"input_player1_left = "left"input_player1_right = "right"input_player1_up = "up"input_player1_down = "down"input_player1_l2 = "del"input_player1_r2 = "pagedown"input_player1_l3 = ""input_player1_r3 = "pause"
# Two analog sticks (DualShock-esque).# Bound as usual, however, if a real analog axis is bound,# it can be read as a true analog.# Positive X axis is right, Positive Y axis is down.# input_player1_l_x_plus =# input_player1_l_x_minus =# input_player1_l_y_plus =# input_player1_l_y_minus =# input_player1_r_x_plus =# input_player1_r_x_minus =# input_player1_r_y_plus =# input_player1_r_y_minus =
# If desired, it is possible to override which joypads are being used for user 1 through 8.# First joypad available is 0.# input_player1_joypad_index = 0# input_player2_joypad_index = 1# input_player3_joypad_index = 2# input_player4_joypad_index = 3# input_player5_joypad_index = 4# input_player6_joypad_index = 5# input_player7_joypad_index = 6# input_player8_joypad_index = 7
# Input device buttons.# Figure these out by using RetroArch-Phoenix or retroarch-joyconfig.# You can use joypad hats with hnxx, where n is the hat, and xx is a string representing direction.# E.g. "h0up"# input_player1_a_btn =# input_player1_b_btn =# input_player1_y_btn =# input_player1_x_btn =# input_player1_start_btn =# input_player1_select_btn =# input_player1_l_btn =# input_player1_r_btn =# input_player1_left_btn =# input_player1_right_btn =# input_player1_up_btn =# input_player1_down_btn =# input_player1_l2_btn =# input_player1_r2_btn =# input_player1_l3_btn =# input_player1_r3_btn =
# Menu buttons.# menu_search_btn =# menu_info_btn =# menu_default_btn =# menu_scroll_down_btn =# menu_scroll_up_btn =
# Swap buttons for OK/Cancelmenu_swap_ok_cancel_buttons = "false"
# Axis for RetroArch D-Pad.# Needs to be either '+' or '-' in the first character signaling either positive or negative direction of the axis, then the axis number.# Do note that every other input option has the corresponding _btn and _axis binds as well; they are omitted here for clarity.# input_player1_left_axis =# input_player1_right_axis =# input_player1_up_axis =# input_player1_down_axis =
# Holding the turbo while pressing another button will let the button enter a turbo mode# where the button state is modulated with a periodic signal.# The modulation stops when the button itself (not turbo button) is released.# input_player1_turbo =
# Describes the period and how long of that period a turbo-enabled button should behave.# Numbers are described in frames.# input_turbo_period = 6# input_turbo_duty_cycle = 3
# This goes all the way to user 8 (*_player2_*, *_player3_*, etc), but omitted for clarity.# All input binds have corresponding binds for keyboard (none), joykeys (_btn) and joyaxes (_axis) as well.
# Toggles fullscreen.# input_toggle_fullscreen = f
# Saves state.# input_save_state = f2# Loads state.# input_load_state = f4
# State slots. With slot set to 0, save state name is *.state (or whatever defined on commandline).# When slot is != 0, path will be $path%d, where %d is slot number.input_state_slot_increase = "right"input_state_slot_decrease = "left"
# Toggles between fast-forwarding and normal speed.# input_toggle_fast_forward = space
# Hold for fast-forward. Releasing button disables fast-forward.# input_hold_fast_forward = l
# Key to exit RetroArch cleanly.# Killing it in any hard way (SIGKILL, etc) will terminate RetroArch without saving RAM, etc.# On Unix-likes, SIGINT/SIGTERM allows a clean deinitialization.input_exit_emulator = "ralt"
# Applies next and previous shader in directory.input_shader_next = "m"input_shader_prev = "n"
# Hold button down to rewind. Rewinding must be enabled.input_rewind = "r"
# Toggle between recording and not.# input_movie_record_toggle = o
# Toggle between paused and non-paused state# input_pause_toggle = p
# Frame advance when content is paused# input_frame_advance = k
# Reset the content.input_reset = "b"
# Cheats.# input_cheat_index_plus = y# input_cheat_index_minus = t# input_cheat_toggle = u
# Mute/unmute audio# input_audio_mute = f9
# Take screenshot# input_screenshot = f8
# Netplay flip users.# input_netplay_flip_players = i
# Hold for slowmotion.# input_slowmotion = e
# Enable other hotkeys.# If this hotkey is bound to either keyboard, joybutton or joyaxis,# all other hotkeys will be disabled unless this hotkey is also held at the same time.# This is useful for RETRO_KEYBOARD centric implementations# which query a large area of the keyboard, where it is not desirable# that hotkeys get in the way.
# Alternatively, all hotkeys for keyboard could be disabled by the user.# input_enable_hotkey_btn =
# Increases audio volume.# input_volume_up = kp_plus# Decreases audio volume.# input_volume_down = kp_minus
# Toggles to next overlay. Wraps around.# input_overlay_next =
# Toggles eject for disks. Used for multiple-disk content.# input_disk_eject_toggle =
# Cycles through disk images. Use after ejecting.# Complete by toggling eject again.# input_disk_next =
# Toggles menu.input_menu_toggle = "x"
# RetroPad button combination to toggle menu# 0 = none, 1 = L + R + Y + D-Pad Down, 2 = L3 + R3, 3 = Start + Select# input_menu_toggle_gamepad_combo = 0
# allow any RetroPad to control the menuall_users_control_menu = "true"
# Toggles mouse grab. When mouse is grabbed, RetroArch hides the mouse,# and keeps the mouse pointer inside the window to allow relative mouse input# to work better.# input_grab_mouse_toggle = f11
#### Menu
# If disabled, will hide 'Online Updater' inside the menu.menu_show_online_updater = "false"
# If disabled, will hide the ability to update cores (and core info files) inside the menu.menu_show_core_updater = "false"
# If disabled, the libretro core will keep running in the background when we# are in the menu.# menu_pause_libretro = false
# If disabled, we use separate controls for menu operation.menu_unified_controls = "true"
# Enable mouse controls inside the menu.# menu_mouse_enable = false
# Enable touch controls inside the menu.# menu_pointer_enable = false
# Shows current date and/or time inside menu.# menu_timedate_enable = true
# Shows current battery level inside menu.# menu_battery_level_enable = true
# Shows current core inside menu.# menu_core_enable = true
# Path to an image to set as menu wallpaper.# menu_wallpaper =
# Dynamically load a new wallpaper depending on context.# menu_dynamic_wallpaper_enable = false
# Type of thumbnail to display. 0 = none, 1 = snaps, 2 = titles, 3 = boxarts# menu_thumbnails = 0# menu_left_thumbnails = 0
# Wrap-around to beginning and/or end if boundary of list is reached horizontally or vertically.# menu_navigation_wraparound_enable = false
# Filter files being shown in filebrowser by supported extensions.# menu_navigation_browser_filter_supported_extensions_enable = true
# Collapse subgroup settings into main group to create one big listing of settings# per category.# menu_collapse_subgroups_enable = false
#### Core## Prevent libretro cores from closing RetroArch on exit by loading a dummy core.# load_dummy_on_core_shutdown = "true"
# Check for firmware requirement(s) before loading a content.# check_firmware_before_loading = "false"
#### User Interface
# Start UI companion driver's interface on boot (if available).# ui_companion_start_on_boot = true
# Toggle companion UI on startup (currently only used to show the WIMP UI)# ui_companion_toggle = false
# Only init the WIMP UI for this session if this is enabled# desktop_menu_enable = true
#### Camera
# Override the default camera device the camera driver uses. This is driver dependant.# camera_device =
# Override the default privacy permission for cores that want to access camera services. Is "false" by default.# camera_allow = false
#### Location
# Override the default privacy permission for cores that want to access location services. Is "false" by default.# location_allow = false
#### Core Updater
# URL to core update directory on buildbot.# core_updater_buildbot_url = "http://buildbot.libretro.com"
# URL to assets update directory on buildbot.# core_updater_buildbot_assets_url = "http://buildbot.libretro.com/assets/"
# After downloading, automatically extract archives that the downloads are contained inside.# core_updater_auto_extract_archive = true
#### Network
# When being client over netplay, use keybinds for user 1.# netplay_client_swap_input = false
# The username of the person running RetroArch. This will be used for playing online, for instance.# netplay_nickname =
# The amount of delay frames to use for netplay. Increasing this value will increase# performance, but introduce more latency.# netplay_delay_frames = 0
# Netplay mode for the current user.# false is Server, true is Client.# netplay_mode = false
# Enable or disable spectator mode for the user during netplay.# netplay_spectator_mode_enable = false
# The IP Address of the host to connect to.# netplay_ip_address =
# The port of the host IP Address. Can be either a TCP or UDP port.# netplay_ip_port = 55435
# Force game hosting to go through a man-in-the-middle server to get around firewalls and NAT/UPnP problems.# netplay_use_mitm_server = false
# The requested MITM server to use.# netplay_mitm_server = "nyc"
#### Directory
# Sets the System/BIOS directory.# Implementations can query for this directory to load BIOSes, system-specific configs, etc.system_directory = "/home/pi/RetroPie/BIOS"
# Save all downloaded files to this directory.# core_assets_directory =
# Assets directory. This location is queried by default when menu interfaces try to look for# loadable assets, etc.# assets_directory =
# Dynamic wallpapers directory. The place to store the wallpapers dynamically# loaded by the menu depending on context.# dynamic_wallpapers_directory =
# Thumbnails directory. To store thumbnail files.# thumbnails_directory =
# File browser directory. Sets start directory for menu file browser.rgui_browser_directory = "/home/pi/RetroPie/roms"
# Core directory for libretro core implementations.# libretro_directory =
# Core info directory for libretro core information.# libretro_info_path =
# Path to content database directory.# content_database_path =
# Saved queries are stored to this directory.# cursor_directory =
# Path to cheat database directory.# cheat_database_path =
# Defines a directory where CPU-based video filters are kept.# video_filter_dir =
# Directory where DSP plugins are kept.# audio_filter_dir =
# Defines a directory where shaders (Cg, CGP, GLSL) are kept for easy access.# video_shader_dir =
# Recording output directory. Where recordings are saved.# recording_output_directory =
# Recording config directory. Where recording settings are kept.# recording_config_directory =
# Overlay directory. Where overlays are kept for easy access.# overlay_directory =
# Directory to dump screenshots to.# screenshot_directory =
# Directory for joypad autoconfigs.# If a joypad is plugged in, that joypad will be autoconfigured if a config file# corresponding to that joypad is present in joypad_autoconfig_dir.# Input binds which are made explicit (input_playerN_*_btn/axis) will take priority over autoconfigs.# Autoconfigs can be created with retroarch-joyconfig, manually, or with a frontend.# Requires input_autodetect_enable to be enabled.# joypad_autoconfig_dir =
# Save all remapped controls to this directory.# input_remapping_directory =
# Save all playlists/collections to this directory.# playlist_directory =
# Save all save files (*.srm) to this directory. This includes related files like .bsv, .rtc, .psrm, etc ...# This will be overridden by explicit command line options.# savefile_directory =
# Save all save states (*.state) to this directory.# This will be overridden by explicit command line options.# savestate_directory =
# If set to a directory, content which is temporarily extracted# will be extracted to this directory.cache_directory = "/tmp/retroarch"
#### RetroAchievements
# Enable the RetroAchievements feature.# cheevos_enable = false
# RetroAchievements.org credentials.# cheevos_username =# cheevos_password =
# The hardcore mode disables savestates and cheating features, but it# makes the achievements points double.# cheevos_hardcore_mode_enable = false
# Show RetroAchievements related messages right after loading a game, such as# successfull login and the number of cheevos you have unlocked for the game.# cheevos_verbose_enable = false
# Show achievements' badges in Quick Menu > Achievements List.# (note: has no effect if menu_driver = rgui).# cheevos_badges_enable = false
# Take a screenshot when an achievement is triggered.# cheevos_auto_screenshot = false
# Besides achievements, some games also have leaderboards, where you can# compete for high-scores, speedruns, etc.# cheevos_leaderboards_enable = false
# Send some messages to the RetroAchievements.org saying, for example,# where you are in the game, how many lives you have, your score, etc.# cheevos_richpresence_enable = true
# Even after unlocking achievements in previous sessions, you may still want# to see them triggering in the current session.# cheevos_start_active = false
# Unnoficial achievements are used only for achievement creators and testers.# cheevos_test_unofficial = false
#### Misc
# Enable rewinding. This will take a performance hit when playing, so it is disabled by default.rewind_enable = "false"
# Rewinding buffer size in megabytes. Bigger rewinding buffer means you can rewind longer.# The buffer should be approx. 20MB per minute of buffer time.rewind_buffer_size = "10"
# Rewind granularity. When rewinding defined number of frames, you can rewind several frames at a time, increasing the rewinding speed.rewind_granularity = "2"
# Pause gameplay when window focus is lost.# pause_nonactive = true
# Autosaves the non-volatile SRAM at a regular interval. This is disabled by default unless set otherwise.# The interval is measured in seconds. A value of 0 disables autosave.# autosave_interval =
# Records video after CPU video filter.# video_post_filter_record = false
# Records output of GPU shaded material if available.# video_gpu_record = false
# Screenshots output of GPU shaded material if available.video_gpu_screenshot = "true"
# Watch content shader files for changes and auto-apply as necessary.# video_shader_watch_files = false
# Block SRAM from being overwritten when loading save states.# Might potentially lead to buggy games.# block_sram_overwrite = false
# When saving a savestate, save state index is automatically increased before# it is saved.# Also, when loading content, the index will be set to the highest existing index.# There is no upper bound on the index.# savestate_auto_index = false
# Slowmotion ratio. When slowmotion, content will slow down by factor.# slowmotion_ratio = 3.0
# The maximum rate at which content will be run when using fast forward. (E.g. 5.0 for 60 fps content => 300 fps cap).# RetroArch will go to sleep to ensure that the maximum rate will not be exceeded.# Do not rely on this cap to be perfectly accurate.# If this is set at 0, then fastforward ratio is unlimited (no FPS cap)# fastforward_ratio = 0.0
# Enable stdin/network command interface.# network_cmd_enable = false# network_cmd_port = 55355# stdin_cmd_enable = false
# Enable Sustained Performance Mode in Android 7.0+# sustained_performance_mode = true
# File format to use when writing playlists to disk# playlist_use_old_format = false
# Keep track of how long each core+content has been running for over time# content_runtime_log = false
# vibrate_on_keypress = false
# Enable device vibration for supported cores# enable_device_vibration = false
global_core_options = "true"input_enable_hotkey = "rctrl"auto_remaps_enable = "true"rgui_aspect_ratio_lock = "2"menu_show_restart_retroarch = "false"xmb_show_add = "false"xmb_show_history = "false"xmb_show_images = "false"xmb_show_music = "false"xmb_shadows_enable = "false"quit_press_twice = "false"
Page updated
Google Sites
Report abuse