I want to get more accurate hole sizes.
From website:
2x Green 24mm Ring-Fixing LED Push Buttons as start buttons
8x Green 30mm Ring-Fixing LED Push Buttons as fight buttons
Small Buttons
When I measure using tape measure 24nm is really 22mm.
22mm Confirmed. Did I use 24mm before?
No just drilled 22mm and 24mm buttons would NOT fit.
So small buttons are 24mm PERIOD.
Standard Buttons
30m is 28mm. Maybe less.
Online everything says 1 1/8 which == 28mm.
28mm will work for sure. Pretty sure that is what I drilled on space invaders.
Measuring pre cut holes they are 28mm.
However will 27mm work? Yes. Since the buttons I have seem to be loose by like 2mm.
No those predrilled holes are bigger maybe 30mm in Arcade 1up CP.
When I use 27mm forstner test hole nothing fits. Ignore.
Just use 28m!!!!! That fits everything perfect.
GRS Spinner is 35mm hole.