I had to use 2 sets to make one good set. One set came from Canada and the others from Florida. Broken mounts and scratched/Bad leanse was the main issue. I did install 70mm hallo's around the projectors. For the american version car you will have to cut some the frame to make room.
You do have to cut away some of the structural metal of the vehicle to get to fit. It is thin metal and can be done by using a sawzall. i outline the area in yellow. cut and file down until lights fit.
The gray housing stands out too much so I am spraying them black.
Polished Lenses and spray painting the housing black. You can tape off lenses or remove them to paint. I choice to remove my lenses since i am doing halo lighting. see Halo's
Since one of the tabs was broken I had to make a mount for it. Hopefully you can find a pair with both top mounting tabs still attached.
Stock vrs. J-Spec comparison. You will notice there are different in the size in the back. You will have to mod the car to get them to fit
June 9th - tested to make sure the lense was good
Picture of gray vrs black
june 27th - painted black inserted HIDs
fitment issue with the tab on the back.
gts lense cover
bulb works. do alot of bench test videos
fog light switch for high beam