Purchased the oil catch can on 4/7/21 from EXILE AUTOWORX. Went with the Wrinkle red color. So far a great product. This red matches my my King6Fab mounts, Nology wires, and strut tower bar mounts. More to come Summer of 2021. Waiting on a fitting.
Filter try out. The filter that it comes with is to tall for the mount location. If the can sits down to low it is hard to drain and it will hit the brake line. With a low profile filter or using an elbo fitting you can mount it to a factory stud that comes off of the fire wall. To use this location you must have no air conditioning parts. The filters are 35mm air filters for scooter/bike.
For the 90 elbow the filer will not lay to the side. It has to line up with the 10an fittings.
After trying out the options I like the low profile filter.
For the two lower valve cover 5/8 vent outs I am coming of the the factory outlet that is under the throttle body and running it back around to the catch can top fitting. I am using a 10AN 90 Degree Push lock fitting with cut to fit Nylon Braded 5/8 hose. I went with the fast free shipping amazon choice. I ordered the 10 feet, but the 5 feet is really all you need.
For the front top PCV it is a 1/4 to 5/16 depending on your PCV valve you are using. will make a hose for it. I tried the 5/8 hose with a straight fitting at first to see how it would look. Looks good on the Catch can side but not so much on the PCV fitting. Hose it to large. Will be using 5/16 line instead. Going to use 1/2 braided sleeve so it will match the 5/8 hose.
The 5/16 to 10an adapter with a swivel end works great. I only found this one fitting on amazon from Autobahn88.