Plenty of leg room. Adjustable in reclining and sliding.
Stock vs Braum; they are very close in color. The stock are cloth upholstery and the Braum has Leatherette.
Looked into using the factory seat brackets, but it is a no go. The Braum mounts are 15" wide and the MX-6 factory seats are 17.5" wide.
Braum seat sliders come with the order. King6 mounts are pre-drilled to work with them. I did have to enlarge King6 mounting holes for the slider bolts. I also bent the rear outer mount for each king6 seat mount just little to work with my mounting setup.
To mount the Braum sliders to the King6Fab mounts, I ordered this Planted SHK Seat Hardware kit off of Amazon. Uses an Allen head bolt with a 13mm Socket size nut.
You can use the stock bolt and nut to mount the seatbelt buckle. You will need to turn the bolt around so the long thread faces outward towards you and the nut fastens to the outside. If the bolt faces inward, it will rub on the seats when you move the slider back and forth.