Pro Aftermarket Seat Brackets (Seat Position: Both, Style: OEM & 5 Point, Logo: MX-6, Paint Color: black)
Item# CNCSeatbracket
standard piece measures 2 1/2 to 8 inch's
Will try 1 - 2 strips from xkglow. The shortest they offer is 10 and i need it to only go 7 inch's so it will be hanging out on one end. I may have to cover up the excess.
2 extension wires, 1 slitter, and 1 DIY kit. around 25$ with shipping
Used 3 layers of 10Mil Stencil sheets spaced 1.85 inches
drivers side I ran a spliter with the 36" wire to the seat light
passanger side I ran the 12" right off of the light under the glove box. but wasn't long enough and had to use another 12.
When it is on it matches the gauges perfectly, but when it is off it is dark blue which matches nothing on my theme. Will try a 10Mi Mylar stencil sheet to make it look lite blue.
F.A.I.L. s - other options I though of at the time.
2 inches is the lowest depth and 3 is the deepest.
Light it up
Intro when finished
transistion for drivers side rgb to passanger side
wire up the drivers side
F.A.I.L's
48 led are over kill and pull to much current.