Gates: racing timing belt.
2 sources shows the T214TB belt fits the KLDE v6. I will also get a kit. Rock auto has it for 80$ + shipping. I went with Amazon hoping it will be back in stock soon with a fresh belt.
Camshaft Sprocket Bolt 90-103 ft. Lbs(122-140 N.m)
Timing Belt Cover 71-97 (8-11) ft. Lbs
The timing belt fits so much like a glove that we had to roll back the timing gear and one of the cam gears to get the belt on. We used slack out of the belt. Then we set it back into correct timing marks
15:50 When you look inside the spark plug hole, you can see the piston moving up to the highest point, called top dead center. As you adjust the timing, the piston starts to move back down, and you will notice the exhaust valve opening. Then, when the piston comes back up, the exhaust valve will close again. On the second trip down with the piston the intake valves open, and when the piston reaches the bottom, it will Once the piston reaches the top, the spark will ignite. This causes the piston to move back down. This cycle will repeat continuously.
Piston Movement in an Engine Cycle
As the piston moves down, the intake valves open.
When the piston reaches the bottom, it will move back up, and the intake valves will close.
Once the piston reaches the top, the spark will ignite.
This causes the piston to move back down.
This cycle will repeat continuously.