You’ll discover the essential steps to take in this article on how to lubricate a garage door in order to lengthen its lifespan and lessen the noise it creates.
The grating, creaking, and screaming noises made by garage doors are a common annoyance that many people choose to ignore and adapt to living with.
You don’t have to put up with that, though, because doing nothing could harm your door.
If your garage door rattles and groans when you open or close it, it may be in need of some maintenance; if you ignore it, the problem will likely worsen.
The appropriate lubrication of all the moving parts is a crucial component of this.
READ ALSO: Dryer Vent Cleaning with Ease
How to Lubricate Garage Door
Follow the step-by-step directions below to lubricate your garage door
Step 1: Vacuum and Clean the Tracks of the Garage Doors
Cleaning the garage door tracks is the first step in lubricating garage doors.
The tracks should not be oiled, but they do need to be clean in order for the rollers to move smoothly along them as they open and close the door.
Vacuum any dust or substantial material off the tracks to start, after that, remove any remaining dirt or dust with a moist rag.
If necessary, you can try using an automotive brake cleaner to help loosen and clear away tough messes that have been trapped.
Step 2: Lubricate Door Hinges and Rollers
It’s time to lubricate various components after cleaning the tracks. Keep in mind that using silicone or lithium-based grease is recommended when considering how to lubricate garage door rollers and hinges.
Lift the door slowly to lubricate the hinges. Spray or wipe the grease onto the hinges as the door bends along the track.
The rollers, which are attached along the door’s track close to the hinges, must then be lubricated.
The little ball bearings housed within these rollers can be lubricated by applying grease using the thinner straw attachment.
Step 3: Lubricate the Bearing Plates and Springs
For the following stage, you will require a step ladder. The top of most garage doors has sprung.
The round bearing plates are positioned on either side of the springs. To guarantee optimal operation, the bearing plates and springs should both be greased.
Spray or thoroughly wipe down these components with the grease to lubricate them. You should oil the garage door and then open it.
The grease will be distributed more evenly thanks to this motion. The door’s springs may need to be replaced if you detect that they are bent or otherwise damaged.
See More Steps on How to Lubricate Garage Door Here
We believe this content on how to lubricate garage doors was helpful. Do well to share this post on various social media platforms.
For More Information, Click Here