Ping is a valuable tool for troubleshooting network or internet issues of any kind. A ping command sends information packets to computers on a network or over the Internet to decide if they are eligible for communication.
In Windows 8, if the device does not have the proper Internet protocol selected, the error message “Ping, Transmit Failed, General Failure” appears: It’s not beyond fixing. In your computer’s control panel, you can pick TCP / IPv4 or TCP / IPv6.
Ping Commands
You can only send ping requests from the command prompt of your operating Top Up Card with Bitcoins Windows 8, open the Search box, type “cmd” in the Search field, then select “Command Prompt” from the list of search results.Also, at the prompt, type “ping,” a space, and then the IP address or domain name of the target.For example, type “ping xxx.xxx.xxx.xxx” or “ping www.mynetwork.com;“ then press Enter. Your computer will send four packets of information at one-second intervals.
Check Out The Set TCP/IP Version
Fixing Ping General Failure: When Running Ping Commands
In an elevated or non-elevated Command, Prompt on a computer running on the Windows Operating System.
The ping command can get in contact with another website or IP address on the same network and see what reply is received.
The following are some of the most effective solutions that users affected by this problem can use to resolve it:
Solution 1
Uninstall any Applications that Block HTTP Traffic in any Way
Foremost, if you have any applications on your computer that are capable of blocking HTTP traffic to or from your computer, you need to get rid of them right away.
Such applications include (but are certainly not limited to) Peerblock, Charles, Wireshark and the AnyConnect mobility client.
A program capable of blocking HTTP traffic to or from your computer might be blocking your computer’s attempts to ping the website or IP address you are trying to get in touch with, which is why uninstalling all such applications is an excellent place to start in this case.
Solution 2
Configure Windows to Prefer IPv4 over IPv6 in Prefix Policies
Not many Windows users know that simply un-checking the IPv6 internet protocol in the Network adapter settings of their computer does not completely disable the IPv6 protocol.
There are prefix policies built into the Windows Operating System that are programmed to prefer using IPv6 over IPv4, and that can lead to your attempts at running ping commands resulting failure error messages.
To configure Windows to prefer IPv4 over IPv6 in prefix policies, you need to
Go here and click on Download under Prefer IPv4 over IPv6 in prefix policies to download Microsoft Easy Fix 21066.
Once Microsoft Easy Fix 21066 has been downloaded, navigate to where you downloaded it and double-click on it to run it.
Follow the on-screen instructions so that the utility may fix this problem for you.
Once the utility is done working its magic, close it and check to see if you can now successfully run ping commands.
See More Solutions Here
There is never a time that isn’t right to help. If this information was useful to you, do well to share it with friends and loved ones.
However, you can share this article on your favorite social media handle.
For More Information, Click Here.