Embedded Files
Post date: Sep 22, 2017 1:44:20 PM
The Pressfit box is an iteration of "The Box" project. In The Box project, we are allowed to use hot glue and tape and whatever we need but it shouldn't show. Pressfit is a concept that can create the same box without using glue or tape. This can be very handy when done right. Pressfit is hard right. I had to wrap my head over the correct dimensions for each piece. On y first try, I made the connecting pieces too long so that the side pieces couldn't properly connect to the bottom. The second try didn't fit properly. I was using a stagger, which didn't really work right. Same happened for my third and fourth tries, but for different reasons. On my fifth try, it finally worked.
If you look closely, you will see no glue or tape of any kind. Though you see the hold in the middle where the connection is.
A close up of one of the connections. As you can see, it is just a normal square with a piece of cardboard sticking out. It is simple, but effective.
Report abuse