Hall Pass

Post date: Oct 5, 2017 1:50:45 PM

For the hall pass, I decided to make one for Mr. Craw. During the making of the pass, two of the pictures were formatted to png, Eaglebotics logo and the gears, this caused the file to be corrupt so I had to make a new one. Using http://png2jpg.com to convert the png pictures to jpg pictures. Even after this the laser cutter only engraved the words and pictures. To get the laser cutter to cut the squares out I left the cardboard in the cutter. Then I deleted everything but the squares from the file and printed again. The Images I selected were the Eaglebotics logo, because Mr. Craw is the robotics teacher, USF's logo, because that is where Mr. Craw went to College, and three gears, because we use gears in robotics. Mr. Craw chose the USF one. During the cutting of the wood, I cut the wood the wrong way cause I didn't realize that the piece of wood was sized correctly to fit three hall passes sized 6x4. So I had to cut another 6x4 piece out of the wood to save what was left.