Si usted va a aprender cualquier cosa sobre principios circuito eléctrico a continuación, la ley de Ohm debe ser la parte superior de su lista. Con la ley de Ohm se puede hacer cálculos para cuantificar la potencia, voltaje, corriente y resistencia en los sistemas de energía renovable con facilidad.
Arriba está una tabla práctica que muestra todas las interrelaciones entre la potencia, corriente, voltaje y resistencia en los cuales:
V es medido en Volts.
R es medido en Ohms.
I es medido en Amps.
P es medido en Watts.
A continuación se muestra una guía de vídeo de introducción a la Ley de Ohm, que comienza explicando qué voltaje, corriente y resistencia en realidad quiere decir con analogías claras para ayudar a comprender:
Please take the time to rate this article (5 = excellent).
0, 1, 2, 3, 4, 5
Article Last Modified: 22:21, 24th Sep 2014
If you have any comments on this article, please email them to neil@reuk.co.uk.
More from the REUK.co.uk website:
Switch from Inverter to Mains Automatically
Power a circuit directly from a power inverter, but with automatic mains power back up.
LM741 Light Dark Sensor Circuit
Build a light/dark sensing circuit to automatically turn on/off lights and other devices
Monitor the voltage of a battery or battery bank using an TL431 (aka LM431) shunt regulator
Make a Simple Battery Status Monitor
Monitor battery status with this easy electric circuit project - no skill required!
Connecting more than one PIR sensors in a circuit
Find out about relay boards - what they are, where to buy them, and how to use them
Learn about the LM317T and its uses in renewable energy projects
AWG to Square mm Wire Size Converter
Convert between AWG, inches and mm diameter, and square mm area measures of wire size
Click one of the links below for further articles on the following relevant topics: