Adding a Job

Step 1: Select '+ Add Job' at the bottom of the Schedule screen

Step 2: Search for the job by customer name or using Tesla device's serial number

Note: Input any character, "x" for example as shown below, in the "Customer Name" field. A new message will now be displayed  -- "Tap here add job by Tesla device's serial number". Tap this message to proceed to the next step.

Step 3: Use the camera scanner to scan the QR code on the side of the Wall Connector

Alternatively, you can manually input the Serial Number here.
If you input the Serial Number manually and it's not correct you will see the following message:

Step 4: Serial number will be picked up by the scanner, then select ‘Add’ 

Step 5: The device you are installing will show up

Tap the Serial Number to proceed to the next step

Step 6: On the Job page, select the ‘ + ‘ button to add a new form 

Step 7: Ensure you select the ‘3rd Party Wall Connector’ form from the list

First select "Install" and then tap "3rd Party Wall Connector"

Step 8: Fill out the installation details 

Step 9: Add images of the installation using your mobile device 

Here are some example photos 

Step 10: Select the options button (three dots icon) and click "Sync" to complete the form