Microsoft Azure Network Engineer (AZ-700) Exam Dumps 2026
Microsoft Azure Network Engineer (AZ-700) Exam Dumps 2026
Visit Official SkillCertPro Website :-
For a full set of 710 questions. Go to
https://skillcertpro.com/product/microsoft-azure-network-engineer-az-700-exam-questions/
SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
SkillCertPro updates exam questions every 2 weeks.
You will get life time access and life time free updates
SkillCertPro assures 100% pass guarantee in first attempt.
Question 1:
You have an Azure subscription. The subscription contains 500 virtual machines that run either Windows 11 or Linux.
You need to identify which Linux virtual machines are accessible from the internet. The solution must minimize administrative effort.
What should you use?
A.Attack path analysis in Microsoft Defender for Cloud
B.Cloud security explorer in Microsoft Defender for Cloud
C.Microsoft Defender External Attack Surface Management (Defender EASM)
Answer: C
Explanation:
Option C is CORRECT because Microsoft Defender External Attack Surface Management (Defender EASM) provides an inventory of all external-facing assets and determines which resources, including virtual machines, are accessible from the internet. Defender EASM automates discovery and categorization of externally exposed services across Azure, multi-cloud, and on-premises environments, making it the most efficient solution for identifying internet-accessible Linux virtual machines while minimizing administrative effort.
Option A is INCORRECT because Attack Path Analysis in Microsoft Defender for Cloud focuses on identifying lateral movement risks and attack chains within an organizations internal environment. It does not specifically list which Linux virtual machines are exposed to the internet but rather helps analyze potential attack vectors inside the network.
Option B is INCORRECT because Cloud Security Explorer in Microsoft Defender for Cloud allows query-based investigations to search for misconfigured resources. While it can help identify VMs with public IP addresses and open ports, it requires manual queries and security configurations rather than automating the process. Defender EASM provides a fully automated external attack surface discovery that does not require manual investigation.
Reference Links:
https://learn.microsoft.com/en-us/azure/defender-for-cloud/concept-easm
Question 2:
You have an on-premises server named Server1 that runs Windows Server.
You have an Azure subscription that contains a virtual network named VNet1.
You plan to connect Server1 to VNet1 by using Azure Network Adapter.
You need to minimize how long it takes to deploy the adapter to Server1.
What should you create first?
A.a route server
B.an Azure Bastion host
C.a private endpoint
D.an Azure VPN gateway
Answer: D
Explanation:
Option D is CORRECT because an Azure VPN gateway must be created first to allow Azure Network Adapter to establish a Point-to-Site (P2S) VPN connection between Server1 and VNet1. The Azure Network Adapter feature in Windows Admin Center simplifies VPN configuration by automating the setup process, but it still requires an existing Azure VPN gateway to function. Without a VPN gateway, the adapter deployment would fail, as it relies on the gateway to facilitate secure connectivity between the on-premises server and the Azure virtual network.
Option A is INCORRECT because an Azure Route Server is used to enable dynamic routing between Network Virtual Appliances (NVAs) and Azure Virtual Network Gateways but is not required for an Azure Network Adapter deployment. A Route Server is relevant for Border Gateway Protocol (BGP) scenarios, not for setting up a P2S VPN.
Option B is INCORRECT because Azure Bastion is used for secure RDP and SSH access to Azure VMs over the Azure portal without exposing public IPs. It does not assist in setting up a VPN connection or deploying an Azure Network Adapter.
Option C is INCORRECT because a private endpoint is used to provide private access to Azure PaaS services over a virtual network but does not facilitate VPN connections. Private endpoints are not relevant to Azure Network Adapter deployments.
Reference Links:
https://learn.microsoft.com/en-us/windows-server/manage/windows-admin-center/azure/use-azure-network-adapter
Question 3:
You create an ExpressRoute circuit named ERC1 that is enabled by your connectivity provider.
You need to ensure that the routes for Azure Backup and Azure Cosmos DB are advertised to the on-premises network via ERC1. The solution must minimize administrative effort.
What should you configure on the ExpressRoute circuit?
A.Azure private peering
B.Microsoft peering
Answer: B
Explanation:
Option B is CORRECT because Microsoft peering is used for services like Azure Backup and Azure Cosmos DB, which rely on public IP addresses and are delivered over the public internet routing domain. Microsoft peering allows access to these services via ExpressRoute while maintaining private connectivity.
Option A is INCORRECT because Azure private peering is designed for private IP address communication between on-premises networks and Azure virtual networks. It does not support public services like Azure Backup and Cosmos DB.
Reference Links:
https://learn.microsoft.com/en-us/azure/expressroute/expressroute-circuit-peerings
https://learn.microsoft.com/en-us/azure/expressroute/expressroute-routing
Question 4:
You create an ExpressRoute circuit named ERC1 that is enabled by your connectivity provider.
You need to ensure that the routes for Azure Backup and Azure Cosmos DB are advertised to the on-premises network via ERC1. The solution must minimize administrative effort.
What should you associate the ExpressRoute circuit with?
A.A route filter and a single filter rule
B.A route filter and two filter rules
C.Two route filters and a single filter rule
Answer: B
Explanation:
Option B is CORRECT because to advertise routes for both Azure Backup and Azure Cosmos DB to your on-premises network via the ExpressRoute circuit, you should associate the circuit with a route filter that includes two filter rules. Each rule corresponds to a specific BGP community value representing Azure Backup and Azure Cosmos DB services. This configuration ensures that only the desired service routes are advertised, optimizing routing and minimizing unnecessary route propagation.
Option A is INCORRECT because a single filter rule would only allow you to specify one service community. Since you need to advertise routes for both Azure Backup and Azure Cosmos DB, two filter rules are necessary.
Option C is INCORRECT because creating two separate route filters with a single filter rule each is unnecessary and adds complexity. A single route filter with multiple rules is sufficient to achieve the desired route advertisements.
Reference Links:
https://learn.microsoft.com/en-us/azure/expressroute/how-to-routefilter-portal
https://learn.microsoft.com/en-us/azure/expressroute/expressroute-routing
https://learn.microsoft.com/en-us/azure/expressroute/how-to-routefilter-portal
Question 5:
You plan to deploy Azure Virtual WAN.
You need to deploy a virtual WAN hub that meets the following requirements:
Supports 10 sites that will connect to the virtual WAN hub by using a Site-to-Site VPN connection
Supports 8 Gbps of ExpressRoute traffic
Minimizes costs
Which Virtual WAN type should you configure?
A.Basic
B.Standard
Answer: B
Explanation:
The Standard Virtual WAN supports both Site-to-Site VPN connections and ExpressRoute connections. For the requirements mentioned, the Standard Virtual WAN is necessary as it supports ExpressRoute, which is not available with the Basic Virtual WAN. Moreover, the Standard Virtual WAN supports the required 8 Gbps of ExpressRoute traffic.
Option A is INCORRECT because the Basic Virtual WAN does not support ExpressRoute connections. While it does support Site-to-Site VPN connections, it does not meet the requirement for ExpressRoute connectivity and is therefore not a suitable choice.
Reference links:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-site-to-site-portal
https://docs.microsoft.com/en-us/azure/expressroute/expressroute-introduction
For a full set of 710 questions. Go to
https://skillcertpro.com/product/microsoft-azure-network-engineer-az-700-exam-questions/
SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
SkillCertPro updates exam questions every 2 weeks.
You will get life time access and life time free updates
SkillCertPro assures 100% pass guarantee in first attempt.
Question 6:
You plan to deploy Azure Virtual WAN.
You need to deploy a virtual WAN hub that meets the following requirements:
Supports 10 sites that will connect to the virtual WAN hub by using a Site-to-Site VPN connection
Supports 8 Gbps of ExpressRoute traffic
Minimizes costs
How many scale units should you configure?
A.2
B.4
C.6
D.8
Answer: B
Explanation:
The Standard Virtual WAN hub in Azure provides 2 Gbps of ExpressRoute bandwidth per scale unit. If you need to support 8 Gbps of ExpressRoute traffic, you would need (8/2) 4 scale units.
Option A, C, and D are INCORRECT. The Standard Virtual WAN hub provides 2 Gbps per scale unit. Hence, to achieve 8 Gbps of bandwidth, you need exactly 4 scale units. Other options would either provide less than required bandwidth (2 units) or would exceed the requirement, increasing the cost (6 and 8 units), which is contrary to the need to minimize costs.
Reference links:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-faq
https://www.wwt.com/article/microsoft-azure-virtual-wan-cloud-networking-architecture
Question 7:
You are planning the IP addressing for the subnets in Azure virtual networks.
Which type of resource requires IP addresses in the subnets?
A.internal load balancers
B.storage account
C.Azure Virtual Networks NAT
D.service endpoint policies
Answer: A
Explanation:
Option A is CORRECT because internal load balancers in Azure require an IP address within the subnet to properly distribute incoming traffic among your services in the Azure virtual network. The load balancer uses this IP address as a front-end IP configuration which becomes the receiving end of the network traffic.
Option B is INCORRECT because storage accounts in Azure do not require IP addresses in the subnets. Azure storage accounts are accessed via URI and not tied to specific IP addresses within a subnet. Instead, they rely on DNS for name resolution.
Option C is INCORRECT because Azure Virtual Networks NAT (Network Address Translation) does not require specific IP addresses in the subnets. NAT services use outbound IP addresses as a source for traffic leaving the virtual network. These outbound IP addresses can either be provided automatically by Azure or manually by the user, but they are not specifically part of the subnet IP addressing scheme.
Option D is INCORRECT because service endpoint policies in Azure do not require IP addresses in the subnets. Service endpoints provide secure and direct connectivity to Azure service resources from your virtual network. They do this by extending your VNet private address space and the identity of your VNet to the Azure service over a direct connection. But they do not need dedicated IP addresses in the subnet.
Reference Links:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview
https://docs.microsoft.com/en-us/azure/storage/common/storage-introduction
https://docs.microsoft.com/en-us/azure/virtual-network/nat-overview
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-service-endpoints-overview
Question 8:
Your company has five offices. Each office has a firewall device and a local internet connection. The offices connect to a third-party SD-WAN. You have an Azure subscription that contains a virtual network named Vnet1.
Vnet1 contains a virtual network gateway named Gateway1. Each office connects to Gateway1 by using a Site-to-Site VPN connection.
You need to replace the third-party SD-WAN with an Azure Virtual WAN.
What should you include in the solution?
A.Delete Gateway1.
B.Create new Point-to-Site (P2S) VPN connections on the firewall devices.
C.Create an Azure Traffic Manager profile.
D.Enable active-active mode on Gateway1.
Answer: A
Explanation:
You should include deleting Gateway1 in the solution.
In this scenario, replacing a third-party SD-WAN with Azure Virtual WAN requires the creation of a new Azure Virtual WAN hub and VPN gateways. Existing Site-to-Site VPN connections to the old gateway (Gateway1) would need to be moved to connect to the new VPN gateways within the Azure Virtual WAN hub. Therefore, Gateway1 is no longer necessary and can be deleted.
Options B, C, and D are INCORRECT.
Creating new Point-to-Site (P2S) VPN connections on the firewall devices (Option B) is not needed. P2S connections are typically used for individual device connections, not for connecting entire office networks. In this case, Site-to-Site VPN connections from the Azure Virtual WAN hub to the office networks are the appropriate solution.
Creating an Azure Traffic Manager profile (Option C) is not relevant to this situation. Traffic Manager is used for distributing network traffic across different regions and services, not for setting up VPN connections or replacing an SD-WAN.
Enabling active-active mode on Gateway1 (Option D) would provide some redundancy for the VPN connections, but it doesn‘t address the need to replace the third-party SD-WAN with Azure Virtual WAN.
Reference links:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-site-to-site-portal
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about
Question 9:
You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN. Users will authenticate by an on-premises Active Directory domain.
Which additional service should you deploy to support the VPN authentication?
A.an Azure key vault
B.a RADIUS server
C.a certification authority
D.Azure Active Directory (Azure AD) Application Proxy
Answer: B
Explanation:
Option B is CORRECT because a RADIUS server is required to integrate Point-to-Site (P2S) VPN with on-premises Active Directory for authentication. Azure VPN Gateway can integrate with RADIUS servers and use RADIUS to authenticate connections to the VPN. This setup is commonly used when an organization already uses RADIUS for other remote access solutions and wants to leverage the same for Azure P2S VPN.
Option A is INCORRECT because Azure Key Vault is a service for securely storing and accessing secrets, keys, and certificates. It doesn‘t provide authentication services for VPNs.
Option C is INCORRECT because a Certification Authority (CA) issues digital certificates for use by other parties. While a CA can be used for VPN authentication, in the scenario described in the question, users will be authenticated by an on-premises Active Directory domain, not by certificates.
Option D is INCORRECT because Azure AD Application Proxy is a service that allows users to access on-premises web applications from a remote client. It is not used for VPN authentication.
Reference links:
https://docs.microsoft.com/en-us/azure/vpn-gateway/openvpn-azure-ad-radius
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-radius-vs
https://docs.microsoft.com/en-us/azure/key-vault/general/overview
https://docs.microsoft.com/en-us/windows-server/networking/core-network-guide/cncg/server-certs/install-the-certification-authority
https://docs.microsoft.com/en-us/azure/active-directory/manage-apps/application-proxy
Question 10:
You fail to establish a Site-to-Site VPN connection between your company‘s main office and an Azure virtual network.
You need to troubleshoot what prevents you from establishing the IPsec tunnel.
Which diagnostic log should you review?
A.IKEDiagnosticLog
B.RouteDiagnosticLog
C.GatewayDiagnosticLog
D.TunnelDiagnosticLog
Answer: A
Explanation:
Option A is CORRECT because the IKE (Internet Key Exchange) Diagnostic Log is used to troubleshoot issues with the IPsec tunnel establishment in a Site-to-Site VPN connection. IKE is the protocol used to set up a security association in the IPsec protocol suite, and if there‘s a problem establishing the tunnel, the IKE Diagnostic Log will have relevant information.
Option B is INCORRECT because the Route Diagnostic Log is used to troubleshoot routing issues. While it can be helpful in other scenarios, it is not specifically used for troubleshooting IPsec tunnel establishment problems.
Option C is INCORRECT because the Gateway Diagnostic Log provides information about the health and status of a VPN gateway, but it is not specifically used for troubleshooting issues with IPsec tunnel establishment.
Option D is INCORRECT because there is no specific log named TunnelDiagnosticLog in Azure for troubleshooting Site-to-Site VPN connections.
Reference links:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-ikev2-ipsec-detailed-log
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-diagnostic-log-query
For a full set of 710 questions. Go to
https://skillcertpro.com/product/microsoft-azure-network-engineer-az-700-exam-questions/
SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
SkillCertPro updates exam questions every 2 weeks.
You will get life time access and life time free updates
SkillCertPro assures 100% pass guarantee in first attempt.