1. Bolts
2. Reset Button (Registration Button)
3. Battery
4. Knob
5. Emergency Lock Cover
6. Green Indicator Light
7. Red indicator Light
8. Yellow Indicator Light
9. Confirm Button (“#”)
Instructions:
Open the box and take out your home safe from the box properly with the help of your hands.
In the box, you have to find 4 bolts, an emergency key, and a manual.
Ways of Opening a Home Safe:
Open the safe for the first time:
Step 1- Press either side of the cover to remove the emergency key cover, you will see the emergency lock.
Step 2- Insert the emergency key, and rotate the emergency key, simultaneously turn the knob clockwise then the door is open
Step 3- Please note: You have to operate the keys and the knob together in combination to open the lock with the keys
Insert the Batteries:
Open the door.
Insert 4X AA batteries into the battery compartment.
Set the User Password:
**After that you will set your user code by using the following steps are:
Step 1-Open the door and press the reset button, you can see the yellow indicator (Proceed) light flash with beeps.
Step 2-Input new code (3 to 8 digits) and press “#” to confirm. If you're hearing two beeps and see the yellow indicator light flashes twice.
Step 3-If the yellow light flashes 3 times with beeps, it means the registration is failed.
Set the master code:
** After that you will set your master code by using following steps are:
Step 1-Open the door, Press “0” twice, and reset the button once. The yellow light will flash two times with two beeps.
Step 2-Input new code (3 to 8 digits) and press “#” to confirm. If you're hearing two beeps and see the yellow indicator light flashes twice.
Step 3-If the yellow light flashes 3 times with beeps, it means the registration is failed.
Audio Warning Signal:
3 time continuously wrong entries will activate the warning beeps.
The keypad would be disabled during the beeping. The beeping will stop automatically after 20 seconds, or can also open the safe with an emergency key and power cut by removing the batteries.