Final Check list prior to cutting.
The outer key ring hole should be 0.5in in diameter.
The inner key ring hole should be 0.18in in diameter
Make sure the red line is 0.005 pts for laser cutting
Make sure the line color is absolute red
RGB red 255 ,0, 0
Make sure the text color is absolute black
RGB black 0 ,0, 0
Make sure the height and width is about 2 in.
Save the file with your name in the title into your periods folder.
Get This Done!!!
Make sure your artwork has been approved.
Make sure your create a test cut.
Choose a pre-died piece of leather or spray paint a piece.
Cover it completely with painters tape - no gaps or overlapping.
Cut Out.
Make sure it can be separated and has been cut all the way out.
Lightly clean out all the ash and debris.
Place it back
Cover the seems, gaps, and holes with painters tape.
Colors
Take it to a well ventilated area outside.
Use clear paint to fill in all the gaps to sealing it for painting. This will help prevent it from bleeding. Use multiple light passes from multiple directions.
Make sure you let it dry at least 30 minutes before painting the color coat.
Choose a inner color. Use multiple light passes from multiple directions and paint it evenly. Make sure you let it dry at least 30 minutes before painting the color coat.