The M2086 was the first ever mass production body armor for the USRF. It is considered ancient by modern standards, usually seen in the hands of backwater units. It sports minimal protection over a large area, being able to stop low velocity shrapnel effectively. As a tradeoff, this armor is heavy and bulky and may reduce the wearer's mobility.

A camouflage version of the M2086, produced and issued later alongside the M2086.

As the Union grew stronger, a new need for being able to protect troops against low power ammunition arose. The M2116 was made to solve that need. The M2116 sports a lot of similarities to its 2086 counterpart, however, has been retrofitted to support a variety of armor inserts ranging from soft inserts capable of stopping an array of pistol threats, to specially made hard plates that are capable of stopping an array of rifle threats, even up to a few rounds of the Union's own 6.8x51mm cartridge.

A camouflage version of the M2116.

The C2133 is Canada's solution for body armor. It was produced early on with protection for the wearer in mind and comes with the capability of supporting soft inserts capable of stopping an array of pistol threats and specially designed hard plates capable of stopping an array of rifle threats. 

For the Northern Repatriates in Wintertide, the C2133 comes standard issue WITHOUT inserts.

The Stab Vest is the Coalition's in-house solution to protecting their army on a wide scale. It is made up of a synthetic material that feels similar to leather and canvas, making for a bulky feel with less restriction on mobility unlike the M2086. At a cost the stab vest is only capable of protecting the upper torso, leaving the abdomen susceptible to damage. The stab vest is able to protect against blunt and blade damage and has been rumored to stop low-velocity shrapnel as well. However, this has not been tested.

The SU, facing the same issues as the NEU in the battlefield, has decided to go in its own venture for body armor that is both capable of meeting the minimal requirement on the field while being affordable to be produced in large batches. The regular variant sees a similar design to the NEU's M2086 flak vest, and is similarly bulky in design. It is capable of stopping an assortment of fragmentation and slash threats. Vehicle crews commonly use this vest to mitigate damage from spalling.

This upgraded variant of the SU Flak Vest can be seen as a mix of the old PASGT system along with the Soviet armor doctrine involving small plates spread along the vest's mesh. Although not capable of stopping direct rifle fire, the plate inserts can be seen capable of stopping an assortment of fragmentation and pistol threats.

As the NEU's peacetime industries shifted to full scale production of military equipment, Kevlar vests have been slowly replacing its older flak counterparts. Kevlar, although more expensive to produce, provides stab-resistance and protection from fragmentation at a fraction of the weight compared to its flak counterparts.  The Kevlar Vest's sleek design also meant minimal compromises to mobility for its user. Soft plate inserts have been made available to certain units as an add-on, providing protection against shotgun pellets and most pistol calibers.

The Individual Body Armor Kit came into service around 2147 as the Union made efforts to modernize its forces with standard issue hard armor in a cost-effective manner. The IBAK passed its testing phase with some sacrifices, being issued out to forces sometime after its passing. However early on it was noted that the IBAK was extremely heavy and failed to provide protection to the user beneath the ribcage. Additionally, due to its material make-up, it has a tendency to spall on impact or downright fail to stop certain impacts. Where IBAK does not fail, however, is against laser threats. It is able to outright stop or deflect some laser threats depending on where it impacts.

The Modular Body Armor System is the Union's latest and greatest piece of technology when it comes to protecting the user against threats. It is a lightweight system that lives up to its modularity, sporting magnetic plates that can be configured depending on the user's mission. It is a form-fitting, low profile solution to protecting against a vast array of threats. Because of its effectiveness, it is highly sought after not only by soldiers but enthusiasts as well. Like IBAK, it is made up of a composite material that is capable of stopping an array of both pistol and rifle threats but at an expensive cost.

Riot armor is the NEU's solution at protecting the wearer in the midst of civil unrest. It is a very rare sight to see amongst frontline USRF troopers, however its commonly seen worn by the Homeland Corps and the CSB during periods of civil unrest. It is capable of protecting the wearer against blunt, and stab threats.

Pieces of riot armor that provide protection to the arms against both blunt and stab threats.

Pieces of riot armor that provide protection to the lower half of the body against both blunt and stab threats.

The M2163 is the Union's most recent rendition of a reliable system capable of supporting MOLLE pouches. It comes standard issue to those in the USRF.

The standard issue belt meant to be paired with the M2163 LBV.

The CRONKCORP Chest Rig is an example of an independent contractor winning the NEU's favor. The rig is a lightweight system capable of supporting MOLLE pouches. Typically, it is used for lightweight reconnaissance operations, but not impossible to be seen used in general.

The Canadian LBR is the standard issue rig seen amongst Canadian infantry. It supports an ancient attachment system used amongst the Northern Repatriates for sustainment and fighting in the field.

The Quebec Chest Rig was first seen during the mass insurrections across Canada in their early days. It is similar to that of the chest rig seen in-use by Coalition infantry and is preferred by Coalition veterans in the Northern Repatriates due to its better supporting frame.

The C&C Conscript Belt saw use by both the Coalition and Canada in times of unrest. Typically, it was issued as a way to provide a lightweight, semi-load-bearing system to its soldiers. It's not as common to see in use today.

The shortage of materials combined with the economic crisis in post-Roanoke Southern Union left both soldiers and officers with no choice but to review their current inventory and adopt cheaper alternatives. The Atlantic Chest Rig is the current standard issue to SU forces and can also be seen being used by NEAF units compromised of Southern Union repatriates.

Lightweight and maneuverable, the Lone Star Chest Rig is a favorite among vehicle drivers and passengers. With its front-loading design, it frees up the wearer's backside, allowing them to sit comfortably in vehicles while still having full access to their rig. It utilizes traditional MOLLE, allowing for any MOLLE-compatible pouches to be placed on it, such as any SU pouches.

Despite being seen by many as incredibly dated, the Appalachian Standard is a staple within The Free Appalachian States. The rig can hold a handful of pouches, wrapped all along the lower belt of the rig. The Appalachian Standard favors buttpacks, designed to store the majority of the wearer's belongings in the rear, allowing the wearer to lay prone with little to no interference. Though, many criticize how difficult it is to reach the rear pockets.