Raspbmc (install from network image)

Post date: 2013/05/11 6:43:44

Get installer.img.gz (Raspbmc network image) (http://www.raspbmc.com/download/)
Make boot disk (http://www.raspbmc.com/wiki/user/os-x-linux-installation/)
- $ umount /dev/sdc1
- $ wget http://svn.stmlabs.com/svn/raspbmc/testing/installers/python/install.py
- $ sudo python install.py
- /usr/bin/clear /sbin/fdisk /bin/grep /bin/umount /bin/mount /usr/bin/cut /bin/gunzip /bin/dd /sbin/blockdev Raspbmc installer for Linux and OS X http://raspbmc.com
- ----------------------------------------
- Please ensure you've inserted your SD card, and press Enter to continue.
- Enter the 'Disk' you would like imaged,
- from the following list:
- Disk /dev/sda: 160.0 GB, 160041885696 bytes
- Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
- Enter your choice here (e.g. 'mmcblk0' or 'sdd'): /dev/sdc
- It is your own responsibility to ensure there is no data loss!
- Please backup your system before imaging
- You should also ensure you agree with the Raspbmc License Agreeement
- Are you sure you want to install Raspbmc to '/dev/sdc' and accept the license agreement? [y/N] y
- It appears that the Raspbmc installation image has already been downloaded.
- Would you like to re-download it? [y/N] N
- Unmounting all partitions...
- Please wait while Raspbmc is installed to your SD card...
- This may take some time and no progress will be reported until it has finished.
- 0+2320 レコード入力 0+2320 レコード出力 76800000 バイト (77 MB) コピーされました、 4.5617 秒、 16.8 MB/秒
- Installation complete. Would you like to setup your post-installation settings [ADVANCED]? [y/N] N
- Raspbmc is now ready to finish setup on your Pi, please insert the SD card with an active internet connection
Boot Raspberry Pi
- connected to network for downloading the latest image