• Mask and Shroud are made from high quality latex or silicone material.

• Color of mask (“flesh”) is medium sapphire blue, with darker blue present in the wrinkles and scarring.

• Color of Shroud is black and has some thickness.

• Eyes are rounded red lenses incorporated into the mask, so no gaps are visible, and dark enough to hide wearers’ eyes.

• Shroud has two small silver disks, one on each cheek, and two circular details slightly below cheekbones for breathing apparatus to attach securely.

• There are two horizontal scars on the top quarter of the snout.

• There are horizontal forehead wrinkles, under-eye wrinkles, and vertical snout wrinkles that start at the upper lip.

• Apparatus includes breathing tubes and canister that attach to the cheek bones of Mask.

• Breathing tubes are black in color with ribbed silver rings overlaying them.

• Breathing tubes wrap around to the back of the neck and attach to the breathing tube canister in back.

• Breathing tubes do not lay on the shoulders, and rigidly hold shape.

• Breathing canister is silver metallic grey.

• Breathing canister has three construction elements: elongated tube at top, middle semi-flat section, and a tube-shaped section at the bottom.

• The entire apparatus (tubes and canister) is heavily weathered.

• Hat is dark brown in color, matching the Duster, and is made of leather, or leather-like material.

• Hat is heavily weathered with brown tones.

• Crown of hat includes metallic plating on each side that is silver grey in color.

  • Plating is made of a durable material such as metal, fiberglass, resin, Sintra, HIPS, PVC, PLA, Vac-formed ABS, or similar material. 

  • Plating has rounded top corners and total plate height extends from brim to the top of the crown, but not beyond.

  • There is a narrow metal band that bridges the gap between the two side plates.

• Hat crown includes a single dark brown strap, made of leather, or leather-like material, that sits over the plates, touching the brim of the hat.

• The underside of the brim is solid dark brown.

Optional Upgrades:

• Hat and crown strap are made of leather.

• NOTE: Skinning the hat in leather is also acceptable, as pure leather may not give the proper look and shape without inner structure.

FIngers/Hands

• Fingers are made of latex, silicone or similar material.

• A full prosthetic hand may be used, but if used, the glove is not incorporated, and is worn on top of the hand.

• Coloring of fingers matches the mask, with the same darker blue present in recesses.

• Fingers may be incorporated or attached to gloves for ease of wear, but this is not required.

Optional Upgrades:

• Fingers extend roughly one knuckle longer than the wearer’s original finger length

Gloves

• Gloves are a dark brown color matching the Hat, and are made of a leather, or leather-like material.

• Gloves are heavily weathered with brown tones.

• Finger portions must cut off half-way past the fingers or be covered by finger prosthetics.

• Gloves have no labels or logos and covers any exposed skin.

• Two silver diamond studs per finger are attached on each knuckle, excluding thumbs.

  • Studs are made of a durable material such as metal, fiberglass, resin, sintra, HIPS, PVC, PLA, Vac-formed ABS, or similar material.

• Very narrow leather or leather-like strips are attached between studs.

Optional Upgrades:

• Gloves and finger strips are leather.

• Diamond studs are metal.

• Gauntlets are made of a rigid material such as metal, fiberglass, resin, sintra, HIPS, PVC, PLA, Vac-formed ABS, or similar material.

• Gauntlets are a medium to dark blue steel in color and are weathered.

• Gauntlets extend from the wrists to the upper forearm, approximately just below the elbow.

• Left and right gauntlets mirror each other in shape.

• Wrist-end of gauntlets have a narrow cuff section fitting the wrist, with a slightly taller band at the very end.

• The outer side of each gauntlet has a similar shape as the inside.

• Each side has extended rear side panels at the back of the gauntlet.

• There is an upper deck which bears a compad and button pad.

• Upper deck has a distinct angle into a downward sloping curvature to the back end of gauntlet.

• Underside of gauntlet has a dart, which extends from a half-egg-shaped base, that is mounted on the face of the lower gauntlet.

Optional Upgrades:

• Both red buttons on top front pad of each gauntlet are lit.

• Handplates sit on top of each glove extending from the wrist to the halfway point of the back of the hand.

• Handplates have a half-moon shape, are dark brown in color, and are made of leather or leather-like material.

• Handplates are attached to the glove by a strap, of same material and color as handplates, that goes all the way around the wrist, connecting with round snaps or snap details on each side of hand.

• Handplates are heavily weathered.

Optional Upgrades:

• Handplates are made of leather.

• Undershirt is long-sleeved and black in color.

• Undershirt is form-fitting and has no visible labels or logos when full costume is worn.

• Vest is a medium to dark khaki color and made of leather or leather-like material.

• Vest is form-fitting and may be attached to the Duster, to give the illusion of an Inner Jacket, but this is not required.

• Collar stands up to wrap around neck, extending about half-way up wearers neck, with a “V” cut detail in the front that extends the length of the collar.

• A faded zig-zag pattern appears on the front of the jacket, predominantly above the first set of buckles.

• Vest closes in the front with a center seam. Closure method is not visible.

• Two straps of same color and material as jacket appear at the bottom of the jacket and are covered with “arrow-shaped” patch designs on either side of the seam.

  • Straps sit close to one another at bottom of jacket, just above the ammo belt.

  • Round antiqued silver buttons sit on center of arrow patches.

• Vest is long enough to reach the top of the ammo belt, or long enough for belt to be worn over top of jacket bottom and is not seen below ammo belt.

• Garment is weathered with darker brown tones.

Optional Upgrades:

• Vest is made of leather.

• Vest is a separate garment from the Duster Coat and may have mesh backing.

• Duster coat is dark brown in color matching the Hat and is made of leather or leather-like material.

• Duster is heavily weathered with brown tones.

• Sleeve openings have oval shape with outside edges extending to elbows and inside edges stopping above the bend of the elbow. Please see gallery for specifics.

• Starting from the backside, around the bottom of the buttocks, duster splits into two coat-tails that extend down to the ankles.

• Front of duster sits open and contains a lapel with three pointed flaps per side which vary in size starting from largest (top) to smallest (bottom).

  • Top flap extends to the same width as wearer’s shoulders and is an extension of the collar.

  • Middle flap extends as wide as the wearer’s chest.

  • Bottom flap is approximately half the width as the middle flap.

• Top flap and front bottom corners of coat have “triangular/circle” metallic silver-grey details that are made of a durable material such as metal, fiberglass, resin, sintra or Vac-formed ABS, are flush to the coat and have no visible means of attachment.

• Top half of duster cuts off mid-length at stomach area, just below the second row of bullets on the holster, and open up wide enough to still see the thigh holsters on each side before coat-tails begin.

Optional Upgrades:

• Duster is made of leather.

• Satchel is same color as Inner Jacket and made of leather or leather-like material.

• Satchel is rectangular in shape with longer side perpendicular to ground.

• Satchel is approximately 2-inches in depth, with a flap opening on the front that extends an inch or two from the bottom of the satchel.

  • Flap is held closed; method to keep closed is not seen.

  • Flap has two raised long rectangular designs; one in upper left corner and one in bottom left corner.

• A strap, approximately a 1”-1 ½” wide, runs from the corner behind top of satchel, over the wearers left shoulder, across the front of the torso, and attaches to the back opposite corner of the satchel.

• Strap is long enough so the center of the satchel sits on the right buttocks of the wearer.

• Satchel is weathered with dark brown tones.

Optional Upgrades:

• Satchel is made of leather.

• Ammo belt and holsters are made of leather or leather-like material.

• Belt and holsters are caramel brown and are weathered with dark brown tones.

• Ammo Belt is worn slightly above the hips, on the lower portion of the abdomen.

• Ammo Belt contains two rows of bullets, wrapped in pairs, and go all the way across the front of the wearer from one hip to the other.

• Bullets are metallic in appearance and made of a rigid material such fiberglass, resin, sintra, HIPS, PVC, PLA, Vac-formed ABS or other similarly sturdy material.

• Four ammo boxes, two stacked on each side, are attached to belt adjacent to last set of bullets. Ammo box flaps taper inward slightly and extend to middle of pouch.

• Holsters are attached to ammo belt by triangular extensions off the bottom of ammo belt.

• Holsters are rectangular in shape, and extend to the middle of the wearer’s thigh, but no longer than the top of the knee.

• Top flap of holsters each have a circular weathered detail, similar to those on the Inner Jacket.

• Ammo Belt attaches to wearer by two straps and metal buckles.

  • Each strap has two rivets, with another rivet attaching the belt to holster extensions.

Optional Upgrades:

• Ammo Belt and Holsters are made of leather.

• Bullets are made of metal.

• Upper section of Pants are made of denim or denim-like material, and are blue-grey in color.

  • If pockets are present, they are not visible.

• Lower section of Pants are made of leather or leather-like material.

• Pants have a tapered color gradient, starting slightly lighter blue-grey than upper section of pants, transitioning around the knee area to a reddish brown.

• Transition point from upper section to chaps section are on an angle, starting higher on the outside of the leg which slant in and down.

• Pants are form-fitting and tuck into the top of the boots.

• Boots are black and extend approximately 1/3 of the way up the wearer’s calf.

• Boots are made of leather or leather-like material.

• Three rows, dark charcoal grey, almost black in color, extend up the shaft of the boot, each with a detailed cut-out in front.

  • Each row has a silver pin-stripe detail around the top edge.

• Boots have a rounded toe and a flat sole with a very slight heel.

• Bottom sole of boot is silver in color.

• Each boot has three disks approximately 1-inch in diameter on the outer side, located on each row of the boot.

  • Disks are a weathered silver appearance with recessed black centers.

• Heel armor and Disks are made of a rigid material such fiberglass, resin, sintra, HIPS, PVC, PLA, Vac-formed ABS or other similarly sturdy material.

• Heel armor does not extend above the ankle or over the lowest row on the boot, and sits flush against the heel of the boots.

• Zippers, if present, are located on the back of boot and are inconspicuous.

• A Jet Booster is attached to each boot at the lower outside disk.

• Boosters are silver to give metallic look, with black weathering.

• Boosters are made of a rigid material such fiberglass, resin, sintra, HIPS, PVC, PLA, Vac-formed ABS or other similarly sturdy material.

• Each booster extends a few inches above the top row of the boot, to the ankle or slightly below.

• Top of Boosters have a rounded cap detail at the top.

• Middle ball section that attaches to boot has a small raised circular detail on the surface facing outward.

• Bottom of Boosters have a cone shape that flares and angles outward slightly.

• Two animated, Clone Wars style LL-30 pistols.

• Pistols are primarily silver with an elongated barrel and the following details:

  • Pistol grips are brown with notched detailing and a silver screw at the base.

  • Scope mount is dark grey, almost black.

  • Base of pistol grip is black.

• Both are heavily weathered and fit holsters properly.