• The mask must completely cover the head and neck, without completely obscuring the shape of the shoulders.

• Character’s hair is black with grey highlights throughout, and with heavier grey on the chin.

• The eyes, a smooth black nose, and a large jaw/muzzle are all clearly visible. A slight mustache like feature is present as well.

  • 1. • Skin around the eyes should be dark grey toned in colour

       • Eyes are brown

• The mask hair is smooth and well groomed, not bushy, so that the mask's shape and structure are clear.

• Head and mouth may be static or mechanical. If static, mouth is closed.

  • 1. • If teeth are visible, there should be prominent pointed incisors visible

• The lips are dark grey toned in color.

• Four dreadlocks are attached to the skull (four in front, four in back). The back two side dreadlocks can be worn over the shoulder toward the front.

• Each dreadlock has two or three 1" inch gold circular bands that go around the tails/dreadlocks.

• Each tail/dreadlock will have touches of grey 

Optional Upgrades:

• The bulk of the hair matches #280 Kanekalon synthetic hair.

• Mouth is mechanical and able to move.

• This layout will only be approved with a Scarred Headpiece.

• Examples of recommended materials are fiberglass, metal, resin, styrene, sintra, Vac-formed ABS, HIPS, PVC, PLA or other rigid substance.

• The gold harness crosses in the front and back, with a hexagon plate at the junction of each cross.

  • Front plate has pattern matching visual references.

• Back harness may also be a “Y-shape”, with a center hexagon plate.

• Each front bandolier has 2-4 sections of side-by-side gold rectangular plates above the chest plate and 3-5 sections below the center chest plate. Number of sections will be properly chosen to fit the wearer, and are 3-D in nature to give the appearance of depth.

• Each back bandolier has as many sections (same size and shape as front) as are necessary to properly join at the girth belt just above the hip bone in the back when using the crossing harness.

Optional Upgrades::

• Hexagon-shaped chest plate will have dark gold background with lighter gold raised scroll pattern that matches visual references.

• Scroll pattern is consistent in width and appearance throughout.

• Back and front harness are made of metal/metal plated

• Examples of recommended materials are fiberglass, metal, resin, styrene, sintra, Vac-formed ABS, HIPS, PVC, PLA or other rigid substance.

• Belt is adorned with front circular top and triangular bottom shaped cod armor plate.

• Face of cod plate is gold with an intricate raised knotwork design.

• Two circular "bolt" details are found on each side of the cod on the belt.

  • Belt may be recessed around bolts to give appearance of depth. Bolt detail will be gold or silver.

    • Belt is constructed from gold rectangular plates. Number of sections will be properly chosen to fit the wearer, and are 3-D in nature to give the appearance of depth.

    • Belt has as many sections (same size and shape as front) as are necessary to properly join around the waist of the wearer.

Optional Upgrades:

• Face of Cod plate is gold with an intricate, lighter gold raised knotwork design and is consistent in width and appearance throughout to match visual references.

• Belt and front detail are made of metal/metal plated

• Examples of recommended materials are fiberglass, metal, resin, styrene, sintra, Vac-formed ABS, HIPS, PVC, PLA or other rigid substance.

• Seven spikes are arranged in a downward pointing triangle formation with the two spike base being horizontal when viewed from the side and the third spike at the lower middle of the shoulder armor.

• Spikes are properly spaced and sized to match visual references.

• Shoulder armour should be a golden bronze colour that maches the shade of the bandolier

• Shoulder armour should have a pattern matching the reference photo 

• Shoulder armour should be properly weathered to show regular wear

Optional Upgrades:

• Shoulder armour is made of metal and pattern detail is engraved

• Complete hair suit using natural or synthetic fibers, matching those used on the Head.

• Hair averages at least 6 inches or longer, but 8-10 inch long hair is preferred.

• Complete coverage is required.

• No bald spots or exposed skin/under suit.

• Arms are properly proportioned.

Optional Upgrades:

• The hair matches #280 Kanekalon synthetic hair (see Mask standard for example photo).

• Hair averages at least 8-10 inches in length.

• Arm extensions may be used and if used, hair on arms do not extend past the top knuckles of the hands.

• Grey or black Gorilla style hands are required.

• Hands should have distinct finger nails/claws.

• Examples of recommended materials for knuckle guards are fiberglass, metal, resin, styrene, sintra, Vac-formed ABS, HIPS, PVC, PLA or other rigid substance. 

• Knuckle guards should have a set of spikes similar to those on the shoulderpads

  • 1. • Each finger should have one square shaped segment topped with one spike

       • Knuckle guards should be worn similarly to brass knuckles on the upper segment of the finger

Optional Upgrades:

• Knuckle guards are made of metal

• When worn, the feet are completely covered with hair except for the bottom and the toes. “Elephant Stump” look is not acceptable.

• The toes and toenails/claws are visible.

• There are five toes on each foot.

• A minimum character height of 2.2m (7.2 ft) to 2.4m (7.9 ft) is required.

• Blaster rifle is based off of a Barrett M107 long-range sniper rifle

• Blaster rifle should be constructed of rigid plastic, rigid rubber, or 3d printed using PLA or PETG. 

  • If rifle is 3d printed, no print lines should be visible

• Blaster rifle should include all details shown in the reference photos

Optional Upgrades:

• Blaster rifle is made of metal

• Blaster rifle has a working scope