Do you want to connect your Cricut to your laptop? If so, this blog is perfect for you. As a craft expert, I’ll tell you how to connect Cricut to laptop and use it for your creative work. I know it’s a little technical, but trust me, it’s very simple. You’ll learn it quickly.
Everybody starts from scratch, and maybe this is your first time setting up your machine on a laptop. Basically, I’ll share the two best methods here: via USB and Bluetooth. So, without wasting a minute, let’s dig into it.
Well, when you’re connecting your machine to a laptop, you should take care of a few things. Check out the list below:
Ensure that your machine is compatible with your device (you can check the minimum system requirements for your device).
Also, use a power cord to connect your devices and turn them on.
You should have a USB cord and a power cord.
If you’re setting up a Bluetooth connection, ensure that your device supports Bluetooth. If not, buy a Bluetooth adapter.
Considering all of these factors, you can start connecting your crafting machine to your laptop.
You’re finally ready with your devices to set up your machine. I’m sharing two of the best methods to connect your machine to your laptop. So, follow all the steps carefully to set up your machine and start your DIY journey.
This is the most preferred method. Since it’s a wired method, you don’t need to setup any complex settings to connect your devices with it. Check out the steps below to connect it.
Start by turning on your machine. Keep your devices in proximity to each other to set up the connection easily.
Then, use a USB cable to connect one end of the cable to the machine and the other end into the laptop.
Now, check if both ends are connected well and if the devices are ON.
Finally, you’ll see a notification on the screen confirming that the setup has finished.
This is how to connect Cricut to laptop via USB. It’s a beginner-friendly method, and anyone can use it to setup their machine with a laptop.
However, you must ensure that your laptop has the necessary USB drivers installed. If not, install them immediately to avoid any obstacles during the setup.
This is another way to connect your machine to a laptop. Check all the steps to connect your devices together via a Bluetooth connection. Learn the procedure below.
In the first step, make sure that your devices are 10-15 feet away from each other.
Then, confirm that the Bluetooth feature is ON.
Now, go to the Device Manager option on your laptop.
After that, check for the Bluetooth option.
Next, head to the Start menu and choose the Device Manager option.
In the next step, move on to Settings and find the Devices option.
Also, you’ll see a Bluetooth option; turn it on.
Afterward, your laptop will detect the machine model from the devices list.
Moving forward, you’ll see an option to provide the password.
When you’re done, press the Enter button.
You can launch the Design Space software and set up the new machine.
You know how to connect your crafting machine to your laptop or computer using a Bluetooth connection. As a wireless connection, it’s highly recommended for a hectic working environment. You can use this connection for your devices.
Finally, you know how to connect Cricut to laptop. Both USB and Bluetooth are good for connecting your machine to a laptop. You can choose anyone. Two things that I want you to know are that you should make sure your laptop supports Bluetooth if you’re choosing a wireless network. And, if you’re choosing a wired connection, ensure that your laptop has USB drivers installed. Besides, everything is simple.
If you want a wireless connection to connect your machine to your laptop, Bluetooth is the only option. As Cricut machines don’t support a Wi-Fi connection, Bluetooth is a reliable method for connecting your devices and starting work on your projects.
If your laptop doesn’t have USB drivers installed, it may create problems with your USB connection. Check how to get them.
On your device, press the Windows and X keys together and launch the Device Manager.
Then, head to the Universal Serial Bus Controllers option.
You’ll see your USB device, right-click on it, and choose the Update driver option.
After that, allow your laptop to search for the necessary USB drivers and install them.
Downloading and installing the software on your laptop is pretty simple. All you need to do is to follow the steps below:
Visit cricut.com/setup on your laptop.
Then, tap on the Download option to get the software for your machine.
Now, agree to the terms and use, as well as the privacy policy.
After that, let it download, and reach the Downloads folder to find it.
Once you find it, double-click on your file and run its installation.
When installation is complete, sign in to your software and go ahead.