If you are having trouble with your flawless cutting machine and all of a sudden your Cricut Maker not working. Then you have reached the right place. On many occasions, we experience glitches and issues while working on our cutting machines. That can be due to wear and tear in the blades of the machine, connectivity issues between the machine and the system that we are working on, or any other reason. But every problem comes with its solutions. So, keep reading this informative blog to find out the various troubleshooting methods you can apply in case your Cricut Maker not working.
Sometimes while cutting our projects, we find that it stops cutting in the middle, and the Go button on our machines starts to flash a light. The flashing light indicates that our Cricut Maker has encountered an error.
This issue mostly occurs if the blades in our Maker machine encounter an irregularity in the material we are currently cutting. These irregularities can be a knot, seam, deep dust and debris, cut-out patchy areas, etc. To get rid of this issue which is leading to Cricut Maker not working, simply follow the steps given below:
To make sure that you continue the cut, do not unload the cutting mat from your Cricut Maker machine.
Examine the area of the Maker machine where the cutting of materials takes place and remove any dirt and debris from that region. It is important that you do not remove the blade; instead, use a paintbrush to clear things off.
After you have thoroughly cleaned the machine, press the “Go” button on the Cricut Maker machine. After a few moments, the cut will resume.
The blades are without a doubt the main part of any cutting machine. But it is a very common error that Cricut Maker not working due to the blades not being detected by your system. So, if you want to resolve this issue, follow the steps given below:
Ensure that the tool recommended in the Cricut Design Space matches the tool installed in clamp B of the Cricut Maker machine. Then, you can select “Edit Tools” to choose a different one.
This step is for you if the correct tool is installed and you are still facing the issues. First, remove the tool from Clamp B of the Cricut Maker machine and clean the reflective surface on the housing. After that, reinstall the toll in Clamp B and press the “Go” button.
From clamp B, remove the tool and gently clean the sensor with either compressed air or a microfiber cloth. After the thorough cleaning is complete, reinstall the tool in Clamp B and press the “Go” button.
Firmware is a crucial part of the proper functioning of your Cricut Maker machine, which helps in proper operation and communication with your computer or mobile device. You will be informed about all the steps in case an update is needed when you first set up your Cricut Maker machine. Once your initial setup is completed, you will get several on-screen prompts for updating your firmware as performance improvements, and new features are added.
If you are using your Cricut Maker machine with Windows or Mac desktop systems, follow the steps given below to update the firmware; if your Cricut Maker not working:
Turn on the power of your Cricut Maker machine and connect it to your computer with a USB Cable or via Bluetooth.
In case a firmware update is necessary, you will receive an alert notification on your screen. The version of the firmware will be listed over there; you will have to select “Update” to continue downloading the latest version of the firmware.
Follow the steps given below to update the firmware on your iOS and Android devices:
Turn on the power of your Cricut Maker machine and pair it to your iOS or Android device via Bluetooth.
When the machine and device are connected, you will get a notification of firmware updates on your screen. All you have to do now is click on “Update,” and you are good to go.
Visit: Cricut.com/setup
Source: https://weldevid654.wordpress.com/2023/02/18/what-to-do-if-my-cricut-maker-not-working/