Interface and Setup

This page takes you through the interface and connections on the RodeCaster, and a video guide on a basic 6 step set-up to get started.

RodeCaster Interface

- 1. Touchscreen for settings and levels during recording
  2. Record (start and stop)
  3. Sound pad playback buttons (need to be lit to be active)
  4. Level controls for mics
  5. Level controls for USB, mobile and bluetooth devices
  6. Level control for Sound pad
  7. Access to settings for mics (channel settings will instantly be displayed on touchscreen)
  8. Headphone volume controls for up to 4 headsets
  9. Volume control for speakers
  10. Mute
  11. Solo
  12. Bluetooth pairing
  13. 3.5mm headphone output

1. Power button
2. USB connection
3. MicroSD card
4. Connection to monitor loudspeakers
5. Headphone outputs
6. Connection to mobile phone
7. XLR mic inputs (with phantom power)

Rode video guide on how to get a basic set-up in 6 steps to record with one mic channel.

RØDECaster Pro | How to Get Started with the RØDECaster Pro | RØDE MicrophonesLearn how to use the RØDECaster Pro straight out of the box. From setting up to hitting record, this user guide will walk through the steps needed to get started with the RØDECaster Pro.

6 Steps to Get Started

Step 1. Plug everything in - power, mic (via xlr into channel1), headphones, micro SD card

Step 2. Power on by pressing red button at back next to power cable

Step 3. Turn volume up - turn up fader for channel 1 (or channel your mic is connected to) and headphone volume can be adjusted

Step 4. Select the mic - press the 1 button at the top of channel 1 to pink. You should then see the properties for Channel on the touch screen. Select the mic which matches the mic you are using.

Step 5. Adjust the gain - go into the Level settings and adjust the + or - when you speak into the mic

Step 6. Press the Record button to start and stop your recording.

Written by LA

Report abuse