Introduction:

The graduation cap is very special, normally used in academic ceremonies, it can be of different colors, depending on the school or institution and is accompanied by its inseparable companions the gown and the certificate, of which are a symbol that you have graduated, so you must wear it with great pride.

1. Measure with the ribbon, the child's head around the forehead and cut out.

2. Trace a strip on the cardboard using the measurement of the ribbon for long and 3 inches wide trim

3. Trace and cut a square on the 10 x 10-inch cardboard

4. Line the  cardboard, place it on the fabric, fold it to cover completely, leaving an extra inch and cut and sew the sides leaving one side open to put the cardboard in and sew the open side.

5. Make a small hole, in the center of the square piece, (the top of our graduation cap.)

6. Line the cardboard strip, laying it on the fabric, fold it to cover completely, leaving an extra inch, trim and sew the fabric strip on the sides, leaving one side open to insert the cardboard strip and sew the open side.

7. Join the strip at each end to form a circle.

8. Join the fabric square with the circular strip together by sewing to form the cap.

9. Draw a cardboard circle of 3 inches in diameter 

10. Sew AVANCE logo on the cardboard so that it is firm and circular.

11. Sew the circle with AVANCE logo to the front of our cap strip 

12. Take the tassel and form a small strand, hold it in the middle to form a small brush and fasten it with a knot fixing our tassel.

13. Put the fastener together with the tassel in the hole at the top of the cap, measure how long you want the tassel to hang from our cap, then make a knot inside to hold it to ensure that our thread does not come out of its place.